G3412 Gas Compression Engine

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3412 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3412 engines include gas lift, gas gathering, and wellhead gas compression. Cat G3412 gas engine. Ratings: 448 bkW (600 bhp) @ 1800 rpm are available for non-regulated areas.

Get a Quote
Minimum Rating 600 BHP
Maximum Rating 600 BHP
Emissions Non-regulated areas
Displacement 1649 in³
Compression Ratio 9.7:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 136
Weight - Dry 4720 lb
Oil Change Interval 750 hours
Ignition, Protection Altronic III
Stroke 6 in
Bore 5.4 in
Cooling System 20 gal (US)
Lube Oil System - Refill 45 gal (US)
Air Inlet System
  • Air cleaner — single element with service indicator
Control System
  • Governor — Woodward PSG mechanica
  • Governor control — positive locking
Cooling System
  • Thermostats and housing
  • Jacket water pump
  • Aftercooler water pump
  • Aftercooler core
Exhaust System
  • Watercooled exhaust manifolds
  • Dry exhaust elbow
Flywheel & Flywheel Housing
  • SAE No. 0 flywheel
  • SAE No. 0 flywheel housing
  • SAE standard rotation
Fuel System
  • Gas pressure regulator
  • Natural gas carburetor
Ignition System
  • Digital ignition system
Instrumentation
  • Service meter
Lube System
  • Crankcase breather — top mounted
  • Oil cooler
  • Oil filter — RH
  • Auxiliary oil reservoir
  • Rear sump oil pan
  • Oil filler in valve cover and dipstick — RH
Mounting System
  • Engine supports
Protection System
  • Shutoff
General
  • Paint — Cat yellow
  • Crankshaft vibration damper and drive pulleys
  • Lifting eyes
Air Inlet System
  • Air cleaner
  • Air inlet adapter
  • Precleaner
  • Air cleaner rain cap
Charging System
  • Battery chargers
  • Charging alternators
  • Ammeter gauge
  • Ammeter gauge and wiring
  • Control mounting
Control System
  • EG3P/2301A speed control governor
  • PSG electric governor
  • PSG pneumatic governor
Cooling System
  • Radiators
  • Blower fan and fan drives for customer suppliedradiators
  • ATAAC conversion
  • Aftercooler
  • Expansion tank
  • Heat exchanger
Exhaust System
  • Flexible fittings
  • Elbows
  • Flanges
  • Rain caps
  • Mufflers
Fuel System
  • Dual gas regulator
  • Low energy fuel carburetor
  • Low pressure gas conversion
  • Propane and natural gas valve and jet kits
  • Fuel filter
Ignition System
  • CSA ignition
  • Ignition ground wiring harness
  • Power supply — digital ignition system
Instrumentation
  • Alarm module
  • Gauges and instrument panels
Lube System
  • Auxiliary oil reservoir removal
  • Lubricating oil
Mounting System
  • Vibration isolators
Power Take-Offs
  • Auxiliary drive pulleys
  • Enclosed clutch
  • Clutch support
  • Front stub shaft
  • Flywheel stub shaft
  • Pulley removal
Protection System
  • Gas valves
  • Status control box interconnect wiring harness
Starting System
  • Air starting motor
  • Electric air start control
  • Air pressure regulator
  • Air silencer
  • Electric starting motors — single 24-volt
  • Starting aids
  • Battery sets (24-volt dry), cables, and rack
General
  • Tool set
  • Digital diagnostic tool