3516C Marine Propulsion Engine

The 3516C propulsion engine is available with a wide range of ratings that meet IMO II regulations without any additional aftertreatment. These engines provide efficient operation with electronic governing, cold mode start strategy, and programmable low idle to minimize fuel consumption. The 3516C engine also incorporates a closed crankcase ventilation system to lower emissions.

Get a Quote
Power Range 1650-3386 bhp (1230-2525 bkW)
Speed Range 1200-1800 rpm
Emissions IMO II
Aspiration TTA
Bore 8.46 in
Stroke 7.48 in
Displacement 4765 in³
Rotation from Flywheel End Counterclockwise or clockwise
Configuration Vee 16, 4-Stroke-Cycle Diesel
Minimum Dry Weight 17550 lb
Minimum Length 143.1 in
Maximum Length 148 in
Minimum Height 77.4 in
Maximum Height 84.6 in
Minimum Width 80.2 in
Maximum Width 84.3 in
Air Inlet System
  • Corrosion resistant separate circuit freshwater aftercooled, powercore air cleaner
Control System
  • Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with electronic unit injector fuel system rigid wiring harness (10 amp DC power required to drive ECU)
Cooling System
  • Gear-driven centrifugal auxiliary sea water pump, geardriven centrifugal jacket water pump, expansion tank for commercial engines, coolant shunt tank on lightweight engines, engine oil cooler, thermostats and housing.
ECU Functions
  • Programmable low idle, SAEJ1939 data link, Cat® data link, engine diagnostics, general alarm relay, programmable parameters (system application and tattletales), Caterpillar ET service tool interface, remote shutdown, shutdown notify, load feedback, overspeed shutdown, overspeed verify
Exhaust System
  • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with watercooled bearings and heat shield. Wastegate on select ratings
Fuel System
  • Electronically controlled unit injectors, simplex fuel filter (RH) with service indicators, fuel transfer pump
Instrumentation
  • Marine Power Display of: Engine oil pressure, engine water temperature, fuel pressure, engine speed, fuel consumption, overspeed shutdown notification light, prelube and shutdown override
Lube System
  • Gear-driven pump, top-mounted dual crankcase breather groups, simplex oil filter, oil filler and dipstick
Power Take-Offs
  • Accessory drive, two-sided front housing
Protection System
  • Emergency stop pushbutton, safety shutoff, oil pressure, and water temperature
General
  • Two lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink-wrap.
ISO Certification
  • Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities.
Air Inlet System
  • Air Cleaner Removal
  • Remote Air Inlet Adapters
Charging System
  • Battery Chargers
  • Charging Alternators
Control System
  • Throttle Position Sensor
  • Throttle Synchronization
Cooling System
  • Water Level Switch Gauge
  • Coolant Level Sensors
  • Connections
  • Keel Cooling Conversions
  • Heat Exchangers
  • Auxiliary Water Pumps
  • Sea Water Pump Removal
  • Coolant Shunt Tanks
  • Air Separator
  • Marine Gear Cooling
Exhaust System
  • Exhaust Outlet
  • Flexible Fittings
  • Elbows
  • Flanges
  • Flange and Exhaust Expanders
  • Mufflers
Fuel System
  • Fuel Cooler
  • Fuel Priming Pumps
  • Flexible Fuel Lines
  • Rigid Fuel Lines
  • Primary Fuel Filter
  • Fuel level switch
Instrumentation
  • PL1000T Communication Module
  • PL1000E Communication Module
  • Customer Interface
  • Thermocouples
  • Remote Panel Display
  • Remote Cylinder Temperature Display
  • Pilot House Instrument Panels
  • Marine Gear Sensors
  • Engine Vision Display System
Lube System
  • Oil Pan
  • Oil Pan Accessories
  • Sump Pumps
  • Prelubrication Options
  • Lubricating Oil
  • CENTRIFUGAL OIL FILTER
Mounting System
  • Engine Supports
  • Vibration Isolation Mountings
Power Take-Offs
  • Flexible Coupling and Guards
  • Front Housing Accessories
  • Upper Left Hand Front Location:
  • Upper Right Hand Front Location:
  • Upper Right Hand Rear Location:
  • Lower Left Hand Front Location:
  • Lower Left Hand Rear Location:
  • Front Housing Accessory Drives
  • Upper LH Accessory Drive
  • Upper RH Accessory Drive
  • Front Power Take Offs
  • Crankshaft Pulleys
  • Damper Guard Removals
Protection System
  • Air Inlet Shutoffs
  • Switches and Contactors
  • Explosion Relief Valve
  • Sensors
Spare Parts Kits
  • Parts Kits
  • Pump Kits
  • Fuel Transfer
  • Lube Oil
Special Appearance
  • Chrome Plated Relief Valves
  • Black Air Cleaners
Starting System
  • Starting Motors or Barring Device
  • Air Starting Motors Options
  • Starting Aids
  • Battery Sets - 24 Volt - Dry
  • Battery Rack
General
  • Tool Set
  • Caterpillar Datalink Wire