- EQUIPMENT
- ATTACHMENTS
- POWER SYSTEMS
- TECHNOLOGY
- AGRICULTURE
The Cat® 908M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.
| Rated Net Power - 2,400 rpm - SAE J1349 | 71.9 HP |
| Engine Model | Cat® C3.3B DIT* |
| Emissions | *The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards. |
| Maximum Gross Power - ISO 14396 | 73.2 HP |
| Note (6) | Stage V engine available for Europe only. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Note (5) | The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions. |
| Note (2) | Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed. |
| Displacement | 201 in³ |
| Rated Net Power - ISO 9249 | 72.9 HP |
| Stroke | 4.7 in |
| Bore | 3.7 in |
| Note (4) | Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard. |
| Maximum Gross Power - ISO 14396 (metric) | 74.2 HP |
| Operating Weight | 14032 lb |
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 908M is configured with a 1.1 m³ (1.44 yd³) bucket with bolt-on cutting edge. |
| Fuel Tank | 20.6 gal (US) |
| Hydraulic System - Including Tank | 19 gal (US) |
| Cooling System | 4.4 gal (US) |
| Axles - Front | N/A |
| Axles - Rear | N/A |
| Transmission - Gear Box | 2.9 gal (US) |
| Hydraulic Tank | 12.2 gal (US) |
| Rated Bucket Capacity | 1.4 yd³ |
| Reach - Full Lift and 45° Dump | 3 ft |
| Full Turn Tipping Load | 8311 lb |
| Tipping Load - Full Turn - ISO 14397-1 | 7947 lb |
| Clearance - Full Lift and 45° Dump | 8 ft |
| Steering Articulation Angle - Each Direction | 39° |
| Tipping Load - Straight - ISO 14397-1 | 9757 lb |
| Maximum Flow - Implement Pump | 22 gal/min |
| Relief Pressure - Tilt Cylinder Rod | 2756 psi |
| Maximum Flow - Implement Pump - Auxiliary Function Standard Flow | 22 gal/min |
| Relief Pressure - Tilt Cylinder Head | 4496 psi |
| 3rd Function Maximum Working Pressure | 3408 psi |
| Maximum Flow - Implement Pump - Auxiliary Function High Flow | 33 gal/min |
| Maximum Working Pressure - Implement Pump | 3408 psi |
| Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift | 9.6 s |
| Tilt Cylinder, Double Acting - Stroke | 16.4 in |
| Lift Cylinder, Double Acting - Bore Diameter | 3.3 in |
| Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height | 3 s |
| Tilt Cylinder, Double Acting - Rod Diameter | 2.2 in |
| Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Lift Cylinder, Double Acting - Stroke | 27.5 in |
| Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height | 1.5 s |
| Boost Flow Maximum Pressure | 3191 psi |
| Lift Cylinder, Double Acting - Rod Diameter | 2 in |
| Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Tilt Cylinder, Double Acting - Bore Diameter | 3.9 in |
| Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time | 9.6 s |
| Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.5 s |
| Length - Wheel Base | 7.08 ft |
| Width - Tread Center | 5.08 ft |
| Departure Angle | 33° |
| Operating Weight | 14323 lb |
| Height - Ground to Cab** | 8.67 ft |
| Reach - Bucket at 45°* | 2.5 ft |
| Clearance - Level Bucket** | 10.5 ft |
| Length - Overall* | 18.42 ft |
| Machine Width | 6.5 ft |
| Turning Radius - Inside of Tires | 6.75 ft |
| Clearance - Bucket at 45° * | 8.58 ft |
| Width - Bucket | 6.75 ft |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Height - Ground Clearance** | 1.08 ft |
| Note (1) | *Vary with bucket. |
| Dump Angle at Full Lift | 45° |
| Height - Bucket Pin** | 11.17 ft |
| Note (2) | **Vary with tire. |
| Articulation Angle | 39° |
| Dig Depth** | 3.9 in |
| Turning Radius - Over Bucket | 14.83 ft |
| Operating Weight | 14319 lb |
| Machine Width | 6.5 ft |
| Length - Overall* | 18.92 ft |
| Height - Ground Clearance** | 1.08 ft |
| Width - Tread Center | 5.08 ft |
| Clearance - Level Bucket** | 10.5 ft |
| Articulation Angle | 39° |
| Turning Radius - Inside of Tires | 6.75 ft |
| Length - Wheel Base | 7.08 ft |
| Departure Angle | 33° |
| Note (1) | *Vary with bucket. |
| Clearance - Bucket at 45° * | 8.17 ft |
| Height - Ground to Cab** | 8.67 ft |
| Reach - Bucket at 45°* | 2.83 ft |
| Note (2) | **Vary with tire. |
| Turning Radius - Over Bucket | 14.83 ft |
| Dig Depth** | 4.2 in |
| Dump Angle at Full Lift | 45° |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Height - Bucket Pin** | 11.17 ft |
| Width - Bucket | 6.75 ft |
| Bucket Capacities | 0.75-1.5 m3 (1.0-2.0 yd3) |
| Note | All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. |
| Bucket Capacities - ISO Coupler | 0.75-1.5 m³ |
| General Purpose | 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³) |
| Grapple | 0.9 m³ (1.2 yd³) heaped |
| Multi-Purpose | 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³) |
| Light Material | 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³) |
| Bucket Capacities - SSL Style Coupler | 1.0-2.0 yd³ |
| ROPS | ROPS: ISO 3471:2008 |
| FOPS | FOPS: ISO 3449:2005 Level II |
| Note (3) | *The measurements were conducted with the cab doors and windows closed. |
| Note (2) | The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). Optional Low Sound or Blue Angel selection will reduce this to 99 dB(A). |
| Note (1) | Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Reverse - High Range | 22 mile/h |
| Forward - High Range | 22 mile/h |
| Reverse - Range 1 | 6 mile/h |
| Forward - Range 2 | 12 mile/h |
| Reverse - Range 2 | 12 mile/h |
| Forward - Range 1 | 6 mile/h |
| Nominal Flow - Steering Pump | 12 gal/min |
| Steering Cylinder, Double Acting - Rod Diameter | 1.4 in |
| Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm | 3 s |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | <6 turns |
| Steering Articulation Angle - Each Direction | 39° |
| Steering Cylinder, Double Acting - Bore Diameter | 3.1 in |
| Maximum Working Pressure - Steering Pump | 3191 psi |
| Maximum Steering Torque - 0° (Straight Machine) | 42506 ft·lbf |
| Maximum Steering Torque - 39° (Full Turn) | 31398 ft·lbf |
| Steering Cylinder, Double Acting - Stroke | 11.8 in |
| Option (1) | 360/80 R20 TRI2 Nokian |
| Option (5) | 405/70 R20 SPT9 Dunlop |
| Note (2) | In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities. |
| Note (1) | Other tire choices available, contact your Cat dealer for details. |
| Option (4) | 400/70 R20 Bibload Michelin |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Option (3) | 400/70 R20 XMCL Michelin |
| Option (6) | 12.5-20 ATU Firestone |
| Option (2) | 375/75 R20 XZSL Michelin |
DEALS
USED
RENTALS
Financing
Service Request
Locations
Careers
