R3000H Underground Mining Loader

Engine Model	Cat® C15
Gross Power - SAE J1995	409 HP
Bore	5.4 in
Stroke	6.8 in
Displacement	927.6 in³
Rated Power	1800 r/min
Gross Power - VR Engine - SAE J1995	409 HP
Gross Power - Tier 3 Engine - SAE J1995	409 HP
Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995	409 HP
Note (4)	Optional Ventilation Reduction package available.
Note (5)	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Note (1)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)	Ratings based on ISO 14396 standard air conditions of 25° C (77° F) and 100 kPa (29.61 inHg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)	No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.

Nominal Payload Capacity	44092 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal	104199 lb
Breakout Force - SAE	61773 lb
Gross Machine Mass	180779 lb
Static Tipping Full Turn Ahead Lift Arms Horizontal	88191 lb

Empty	128448 lb
Loaded	172540 lb
Empty - Rear Axle	73853 lb
Empty - Front Axle	54558 lb
Loaded - Front Axle	125187 lb
Loaded - Rear Axle	47316 lb

Forward - 1	3 mile/h
Forward - 2	5.7 mile/h
Forward - 3	10.2 mile/h
Forward - 4	17.5 mile/h
Reverse - 1	4.1 mile/h
Reverse - 2	7.1 mile/h
Reverse - 3	12.7 mile/h
Reverse - 4	19.4 mile/h

Raise	8.8 s
Dump	1.85 s
Lower, Empty, Float Down	3.54 s
Total Cycle Time	14.2 s

Bucket Capacities	8.9-11.6 m³ (11.6-15.2 yd³)
Dump Bucket - 3	13.7 yd³
Light Material Bucket	15.2 yd³
Dump Bucket - 1 - Standard Bucket	11.6 yd³
Dump Bucket - 2	12.4 yd³

Axle Oscillation	8 °
Articulation Angle	42.5 °
Inner Clearance Radius**	127.8 in
Note	**Clearance dimensions are for reference only.
Outside Clearance Radius**	296.7 in

Tire Size	35/65 R33 VSNT

Engine Crankcase	9 gal (US)
Front Differential and Final Drives - With Axle Oil Cooling System	42 gal (US)
Rear Differential and Final Drives - With Axle Oil Cooling System	44.1 gal (US)
Rear Differential and Final Drives	33.5 gal (US)
Front Differential and Final Drives	31.4 gal (US)
Hydraulic Tank	37 gal (US)
Fuel Tank	406.5 gal (US)
Cooling System	19.8 gal (US)
Transmission	16.4 gal (US)

Standards	ROPS/FOPS Certified Cab

ELECTRICAL

12V Power Supply in Cab
Alternator, 95-amp
Auxiliary Start Receptacle
Battery Disconnect Switch, Ground Level
Circuit Breaker, 80-amp
Corrosive Protection Spray
Diagnostic Connector
Electric Starting, 24-volt
Engine Shutdown Switches:
– Rear Right Hand Side
External Lighting System, Front, Rear, Halogen Work Lights
Low Maintenance Batteries
Reversing Alarm
Starting and Charging System

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)
Electric Horns
Gauges:
– Engine Coolant Temperature
– Transmission Coolant Temperature
– Hydraulic Oil Temperature
– Fuel Level
– Speedometer
– Tachometer
Indicator Lights:
– Alert Warning Light
– Residual Brake Pressure
Low Hydraulic Level Warning
Operators Station, Enclosed ROPS/FOPS Structure:
– Air Conditioning
– Cab Pressurizer and Filter
– Dome Light
– Heater
– Radio Ready Compartment for Radio and Speakers
Operator Presence System (Auto Park Brake)
Pilot Hydraulic Implement Controls, Single Joystick
Push Button Panel for Lights
Suspension Seat with Retractable Seat Belt
STIC Steering

POWER TRAIN

Cat C15 ATAAC Diesel Engine, 6-Cylinder
Brake Axle Cooling
Electric Fuel Priming Pump
Engine Air Intake Precleaner
Engine Oil Filter, Remote Mounted
Heat Shields
Long Life Coolant
Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse
Radiator, Cross Flow
Radiator Cap Manual Release
Rims, 5-Piece, Tubeless
SAFR™ Full Hydraulic Enclosed Wet Multiple-Disc Brakes
Torque Converter with Automatic Lockup Clutch
Transmission Neutralizer
Transmission Filter Drain Tap

OTHER STANDARD EQUIPMENT

Brake Light
Bucket, Dump
Bucket Lip, Hardox 450 Bucket
Bucket Positioner, Return to Dig
Catalytic Exhaust Purifier/Muffler Group
Decals, International Picto Graphics
Fuel System:
– Dual Fuel Tanks
– Fuel System Manual Shut Off Taps
Engine and Transmission Belly Guards
Fenders, Front, Rear
Firewall
Hand Hold (Access On/Off Top Deck)
Operation and Maintenance Manual – English and other applicable local languages to select
Protection Wear Bars 100 × 50 mm (4 × 2 in)
Semi Centralized Lubrication Points
S·O·S port
– Coolant
– Engine Oil
– Hydraulic Oil
– Transmission Oil
Swing Out Radiator Grill
Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

OPTIONAL EQUIPMENT

Battery and Engine Shutdown Switches
– Ground Level Isolation, In Cab Isolation Switch
– Ground Level Isolation, Secondary Engine Shutdown Switch
– Ground Level Isolation, In Cab Isolation, Engine Shutdown Switch
Brake Pressure Gauges
Brake Release Arrangements
– Recovery Hook
– Recovery Bar
Buckets
– Bucket, Light Weight Material (11.6 m³/15.2 yd³)
– Bucket Standard Profile (8.9 m³/11.6 yd³ to 10.5 m³/13.7 yd³)
– Bucket Spill Guard
Bucket Hardware
– Cutting Edge, Cat Weld On
– Cutting Edge, Half Arrow, Flat
– Cutting Edge, Bolt-On
– Heel Shrouds
– Mechanical Attached Shroud (MAS)
– Mechanically Attached Wear Plate System, Cutting Edge Protection (MAWPS)
– Mechanically Attached Wear Plate System, Bottom Protection (MAWPS)
– Protector Pads (Bottom of Bucket)
– Wear Bars
– Wear Liner (for use with standard profile buckets)
Bucket Lip
– Lip Fully Welded or Tack Welded
– Lip Bare (No Hardware)
Bolt-On Lip
– MAS Ready (Mechanically Attached Shrouds)
Camera, Color Rear Facing
Cover, Anti Vandalism for Shipping
Drawbar Attachment, Bolt-On
Engine Options
– Engine, Ventilation Reduction (VR)
– Engine, Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)
- DPF (Flow Through)
- DPF (Wall Flow)
Lighting
– External Lighting System, Front, Rear, LED Work Lights
– High/Low Beam Function
Fast Fill System
– Coolant
– Engine Oil
– Fuel (Dual Tanks)
– Hydraulic Oil
– Transmission Oil
Fire Suppression System
– Foam, Water Based
– Ansul, Dry Powder
Fluids
– Arctic Coolant
– Arctic Fuel
Front Light Protectors
Fuel System
– Fuel Lines Double Braided (Stainless Sleeving)
– Fuel Lines Standard Braided (Double Braid Hydraulic Hose)
Guard, Rear Side Quarter Window
Handrails
– Hand Hold (Access On/Off Top Deck)
– Fold Down
Hydraulic System
– Alternate Implement/Pilot Control Configuration
Lubrication System
– Automatic
– Centralized
Operators Station
– Strut, Cab Door
Park Brake Switch Engagement
– Push to Apply
– Pull to Apply
Payload Control System
– Loadrite L2180
Remote Control Interface (excludes Transmitter and Receiver)
– RCT
Reversible Steering
Reflective Tape
Ride Control System
Rim
– Rim Identification Numbering
– Spare (Tubeless)
Seats
– Seat Covers, Tee, Air and Standard
– Suspension Seat Tee, Vinyl
– Suspension Seat Air Vinyl
Secondary Steering System
Service Tools
– Brake Wear Gauge
– Collet Jacking Bolts
– Diagnostics Box
– Recovery Bar (for use with Brake Release, Recovery Bar System)
– Socket Extension, Wheel Nut
– Reference Parts Manual for Additional Tooling Available
Switches
– Additional Engine Shutdown, Mounted LHS
– Idle Timer
Technology
– Command for Underground
– Vital Information Management System (VIMS) Gen 3
Tire Arrangements
– Tire, 35/65 R33 VSNT Bridgestone
– Tire, 35/65 R33 VSDL Bridgestone
Wear Protection Bars
– Cab/ROPS
– Hydraulic Tank
– Radiator
Windows
– Single Pane
– Dual Pane
NOTE: Not all features are available in all regions.
See your Cat dealer for more information.

R3000H Underground Mining Loader

Engine

Operating Specifications

Weights

Transmission

Hydraulic Cycle Times

Bucket Capacities

Turning Dimensions

Tires

Service Refill Capacities

Standards

ELECTRICAL

OPERATOR ENVIRONMENT

POWER TRAIN

OTHER STANDARD EQUIPMENT

OPTIONAL EQUIPMENT