- EQUIPMENT
- ATTACHMENTS
- POWER SYSTEMS
- TECHNOLOGY
- AGRICULTURE
| Engine Model | Cat® C3.6L |
| Gross Power - Basic | 73.7 HP |
| Maximum Torque - Standard | 302.4 lb/ft |
| Bore | 4.13 in |
| Stroke | 4.99 in |
| Displacement | 268.5 in³ |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Operating Weight | 22002 lb |
| Rated Load Capacity | 6500 lb |
| Maximum Lift Height | 42 ft |
| Maximum Forward Reach | 30 ft |
| Top Travel Speed | 19 mile/h |
| Drawbar Pull - Loaded | 20670 lbf |
| Turning Radius - Over Tires | 12 ft |
| Frame Leveling | 10° |
| Capacity at Maximum Height | 6500 lb |
| Capacity at Maximum Reach | 700 lb |
| Height | 8 ft |
| Width | 8 ft |
| Wheel Base | 11.25 ft |
| Length - Fork Face | 18.5 ft |
| Ground Clearance | 17 in |
| Turning Radius - Over Tires | 12 ft |
| Standard | 370/75-28 Duraforce Air |
| Optional (1) | 370/75-28 Duraforce Foam Fill |
| Optional (2) | 315/95-28 Telemaster Solid |
| Optional (3) | 13.00-24 16PR Air |
| Optional (4) | 13.00-24 12PR Foam |
| Optional (5) | 370/75-28 Non-Marking Air |
| Optional | 370/75-28 Non-Marking Foam |
| Gear Pump | Single-section |
| Auxiliary Hydraulic Pressure | 3481 psi |
| Auxiliary Hydraulic Flow | 18 gal/min |
| Fuel Tank | 38.3 gal (US) |
| Hydraulic System | 42 gal (US) |
| Boom Up | 15 s |
| Boom Down | 10.3 s |
| Tele In | 9.5 s |
| Tele Out | 16.3 s |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Type (1) | Trunnion mounted planetary 55 degree steer axles. |
| Type (2) | High bias limited slip differential on front axle. |
| Carriages - Dual Fork Positioning | 50 in |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Pallet Forks - Option 3 | [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Carriages - Standard Tilt | 50 in |
| Carriages - Side Shift | 50 in |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Forward | 4 speed |
| Reverse | 3 speed |
DEALS
USED
RENTALS
Financing
Service Request
Locations
Careers
