G3606 A4 Gas Engine

G3600 A4 engines provide a wide range of power options to fit your gas compression application. G3600 A4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 A4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3500B engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606A4 gas engine with ratings: 1398-1499 bkW (1875-2010 bhp) @ 1000 rpm are NSPS site compliant capable.

Get a Quote
Minimum Rating 1875 BHP
Maximum Rating 2010 BHP
Emissions NSPS Site Compliant Capable
Displacement 7762 in³
Compression Ratio 9.2:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel Teeth 255
Weight - Dry 36883 lb
Oil Change Interval 5000 hours
Ignition, Protection Electronic (ADEM™ A4)
Stroke 11.8 in
Bore 11.8 in
Cooling System 124 gal (US)
Lube Oil System - Refill 187 gal (US)
Air Inlet System
  • Air cleaner — standard-duty inlet air adapter
Control System
  • A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
  • Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
Cooling System
  • Jacket water pump
  • Jacket water thermostats and housing
  • Aftercooler/oil cooler pump
  • Aftercooler/oil cooler thermostats and housing
  • Two-stage aftercooler
  • Jacket water heater connections
  • Standard ANSI connections
Exhaust System
  • Dry exhaust manifolds
  • Single vertical outlet adapter
  • Stainless steel encapsulated insulation
Flywheels and Flywheel Housing
  • SAE standard rotation
Fuel System
  • Gas admission valves -- electronically controlled fuel supply pressure
Ignition System
  • A4 control system — senses individual cylinder detonation and controls individual cylinder timing
Lube System
  • Crankcase breathers (top mounted)
  • Oil cooler
  • Oil filter
  • Oil pan drain valves -- front and rear
Mounting System
  • Engine mounting feet (four total)
Protection
  • Electronic shutoff system with purge cycle
  • Crankcase explosion relief valves
  • Gas shutoff valve
Starting System
  • Air starting system
General
  • Paint — Cat yellow
  • Vibration dampers
Air Inlet System
  • Heavy-duty air cleaner with precleaners
Charging System
  • 35 Amp & 65 Amp charging alternators – CSA approved
Exhaust System
  • Flexible bellows adapters
  • Exhaust expander
  • Weld flanges
Fuel System
  • Fuel filter
  • Gas pressure regulator
  • Flexible connection
Instrumentation
  • LCD display panel
  • Remote data monitoring and speed control
  • Color HMI display
  • Compatible with Cat® Electronic Technician (ET) and Data View
  • Modbus and Ethernet capable
Lube System
  • Air or electric motor-driven prelube
  • Duplex oil filter
  • RH Service
  • Lube oil makeup system
Mounting System
  • Mounting plates (set of four)
  • Extra mounting feet (set of two)
  • Extra mounting plates (set of two)
Power Take-Offs
  • Front stub shafts
Starting System
  • Air pressure reducing valve
General
  • Engine barring device
  • Damper guard