CG137-12 Gas Engine

Tough and durable, with field-proven head design to maximize time between overhauls. CG137 engines are equipped with ADEM A4 technology that brings performance, uptime, and low operating cost to your operation. CG137 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for CG137-12 engines include gas lift, gas gathering, and wellhead gas compression. Cat CG137-12 gas engine. Ratings: 447 bkW (600 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar air-fuel ratio control and aftertreatment.

Get a Quote
Minimum Rating 600 BHP
Maximum Rating 600 BHP
Emissions NSPS 2010
Displacement 1648 in³
Compression Ratio 8.3:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 14 or 18, Flywheel Housing SAE No. 0
Flywheel Teeth 136
Weight - Dry 6250 lb
Oil Change Interval 750 hours
Ignition, Protection Electronic ADEM A4
Air/Fuel Ratio Control Electronic ADEM A4
Stroke 6 in
Bore 5.4 in
Cooling System 20 gal (US)
Lube Oil System - Refill 45 gal (US)
Air Inlet System
  • Air cleaner — single element with service indicator
  • Optional air inlet adapter and rain cap — recommended for weather protection
Control System
  • ADEM A4
  • Class 1, Division 2, Group C&D and Zone 2
Cooling System
  • Jacket water thermostats and housing — full open temperature 98°C (208°F)
  • Jacket water pump — gear driven, centrifugal, non-self-priming
  • Aftercooler water pump — gear driven, centrifugal, non-self-priming
  • Aftercooler core — for treated water and sea air atmosphere
Exhaust System
  • Exhaust manifolds — watercooled
  • Exhaust elbow — dry 203 mm (8 in)
  • Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options
Flywheels & Flywheel Housings
  • Flywheel, SAE No. 14 or 18
  • Flywheel housing, SAE No. 0
  • SAE standard rotation
Fuel System
  • Air/fuel ratio control
  • Gas pressure regulator
  • Natural gas carburetor
Lube System
  • Crankcase breather — top mounted
  • Oil cooler
  • Oil filter — RH
  • Oil filler in valve cover, dipstick — RH
Mounting System
  • Engine mounting rails — 254 mm (10 in) industrialtype, entire length
Protection System
  • ADEM A4 protection
  • The following include alarm and shutdown:
  • The following is display only
General
  • Paint, Caterpillar yellow
  • Crankshaft vibration damper and drive pulleys
  • Lifting eyes
  • Cylinder block inspection covers
Charging Alternator
  • 24V, 35A CSA alternator
Exhaust System
  • Exhaust flex fitting
  • Exhaust elbow
  • Exhaust flange — ANSI
Instrumentation
  • Operator interface panel
  • Operator interface panel enclosure
  • 15', 20', 50' interconnect harness
Starting System
  • Air pressure regulator
  • Air start silencer
  • Vane starter
  • Electric starter
  • Turbine starter
Fuel System
  • Fuel filter
Air Inlet System
  • Precleaner
  • Rain cap