C7 ACERT™ Dry Manifold Engine

Cat C7 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C7 ACERT engines to deliver excellent performance with low operating costs and emissions. Applications powered by C7 ACERT engines include pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. The C7 ACERT engines, with ratings: 168-224 bkW (225-300 bhp) @ 1800-2200 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Get a Quote
Minimum Rating 225 BHP
Maximum Rating 300 BHP
Governor and Protection Electronic (ADEM™ 3)
Aspiration Turbocharged-Aftercooled
Displacement 441.8 in³
Flywheel and Flywheel Housing SAE 1, 2, or 3
Flywheel Teeth 156 (SAE 1), 134 (SAE 2), 126 (SAE 3)
Rotation from Flywheel End Counterclockwise
Stroke 5 in
Bore 4.3 in
Emissions EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Length 41.4 in
Width 29.9 in
Height 40.6 in
Weight 1386 lb
Lube Oil System - Refill 4.8 gal (US)
Air Inlet System
  • Turbocharger, air to air aftercooled
  • Air inlet, LH side facing front 79.0 mm (3.11 in) connection
Control System
  • Electronic governing, PTO speed control
  • Programmable rating
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speeds, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Automatic variable timing, electronic
  • All engines shipped at max rated rpm
Cooling System
  • Thermostats and housing, vertical outlet
  • Jacket water pump — belt-driven, centrifugal
  • Water pump, inlet RH front vertical inlet (pointing down)
Exhaust System
  • Exhaust manifold — dry
  • Front turbo exhaust
Fuel System
  • Hydraulic Electronic Unit injection (HEUI)
  • Fuel filter — secondary, LH front (2-micron high performance)
  • Fuel transfer pump — LH front
  • Fuel priming pump — LH front
General
  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Electronic installation kit (connectors, pins, sockets)
Lube System
  • Crankcase breather, LH side
  • Oil cooler, RH
  • Oil filler, front top valve cover
  • Oil filter and sampling valve, RH
  • Oil pan, front sump, 31 L (33 qt) oil change capacity
  • Oil dipstick, LH rear
  • Engine oil pump (gear-driven)
  • Engine shipped without oil
Power Take-Offs
  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide
Air Compressor
  • Air compressors
  • Air compressor governor
Air Inlet System
  • Air cleaners
  • Precleaner
  • Air inlet elbow
  • Air shutoffs
Charging Systems
  • Charging alternators
  • Alternator mountings
  • Alternator belt tensioner
  • Alternator pulleys
  • Alternator guards
Cooling System
  • Radiators
  • Fan drive and pulley - f/u/w radiator packages
  • Fans f/u/w radiator packages
  • Coolant level sensor
  • Fan drive mountings
  • Fan adapters
  • Fan adapter for blower fans
  • Fan pulleys
  • Fan height instructions
  • Vee belts for customer-supplied radiators
  • Suction fans and blower fans
  • Water inlet elbows
  • Dry charge coolant conditioners
Emissions Certification
  • IMO Certification
Exhaust System
  • Flexible fitting
  • Turbocharger exhaust outlet adapters
  • Elbows, flange, pipes, clamp
  • Rain caps
  • Manifolds
  • Mufflers
Flywheels and Flywheel Housing
  • Crankshaft seal
Fuel System
  • Flexible fuel lines
  • Water separator and fuel filters
  • Fuel cooler
General
  • Tool set
Instrumentation
  • Gauges and instrument panels
  • Interconnect harnesses
  • Voltmeters
  • Gauge mounting
  • Ammeter
Lube System
  • Oil pan
  • Drain and cover
  • Oil level gauges
  • Remote oil filter
  • Oil fillers
  • Lubricating oil
  • Fumes disposal
Mounting System
  • Structural steel base
  • Front engine support
  • Rear engine supports
Power Take-Offs
  • Enclosed clutch
  • Clutch supports
  • Flywheel stub shaft
  • Hydraulic pump drives
  • Hydraulic gear pumps
Starting System
  • Starting Aids
  • Electric Starting Motors — 12V and 24V
  • Battery Sets - 12V and 24V (dry)
  • Battery Cable