C15 ACERT™ Tier 4 Interim Engine

Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements. This is an ideal engine for applications that require Tier 4 Interim or EU Stage IIIB emissions certifications in well service applications such as workover rigs, pump skids, nitrogen units, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C15 ACERT engines, with ratings: 354-433 bkW (354-433 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards and are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about emissions describes the particular rating’s emissions technology. For more information about emissions certification, please contact your local Cat dealer.

Get a Quote
Minimum Rating 475 BHP
Maximum Rating 580 BHP
Governor and Protection ADEM A4
Aspiration Turbocharged-Aftercooled
Displacement 928 in³
Flywheel and Flywheel Housing SAE No. 0 or SAE No. 1
Flywheel Teeth 136 (SAE 0), 113 (SAE 1)
Rotation from Flywheel End Counterclockwise
Stroke 6.7 in
Bore 5.4 in
Emissions U.S. EPA Tier 4 Interim, EU Stage IIIB
Length 60.2 in
Width 37.8 in
Height 50.5 in
Weight 3673 lb
Cooling System 5 gal (US)
Air Inlet System
  • Turbocharged Air-to-Air Aftercooled
Control System
  • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
Cooling System
  • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
Exhaust System
  • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
Flywheels and Flywheel Housing
  • SAE 0 and SAE 1 flywheel housing
Fuel System
  • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
Lube System
  • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, shallow)
Power Take Off
  • SAE A, SAE B, SAE C drives available, engine power can also be taken from the front of the engine on some applications
General
  • Paint: Cat yellow; vibration damper; lifting eyes
Engine-Mounted Transmission Oil Cooler
  • integration with engine cooling system allows ease of installation and a tighter overall engine package
Engine Brakes
  • braking capabilities for mobile applications