3516C Propulsion Engine (Tier 3)

The 3516C propulsion engine is available with a wide range of ratings that meet EPA Tier 3 and IMO II regulations without any additional aftertreatment. These engines provide efficient operation with electronic governing, cold mode start strategy, and programmable low idle to minimize fuel consumption. The 3516C engine also incorporates a closed crankcase ventilation system to lower emissions.

Get a Quote
Power Range 2131-2675 bhp (1590-1995 bkW)
Speed Range 1600 rpm
Emissions EPA Tier 3, IMO II
Aspiration TTA
Bore 6.69 in
Stroke 8.46 in
Displacement 4765 in³
Rotation from Flywheel End Counterclockwise
Configuration Vee 16, 4-Stroke-Cycle Diesel
Dry Weight 21164 lb
Length 125.7 in
Height 87.6 in
Width 89.9 in
Air Inlet System
  • Corrosion-resistant separate circuit aftercooler core, air cleaners with service indicator, dual turbochargers, closed crankcase ventilation system
Control System
  • Dual A4 engine control modules provide engine control and monitoring, rigid wiring harness with plug and run connectors on port and starboard sides
Cooling System
  • Separate circuit auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
Exhaust System
  • Dry gas-tight exhaust manifolds with SOLAS compliant stainless steel heat shields, dual turbochargers with water-cooled bearings and heat shields, modular pulse exhaust manifold, single exhaust outlet
Fuel System
  • Electronically controlled unit injectors, fuel filter with service indicators, fuel transfer pump, SOLAS compliant fuel connections with spill shield
Instrumentation
  • Instrument panel shipped loose with Color Marine Power Display (MPD), alarm horn, overspeed shutdown notification light, emergency stop notification light, secondary ECU “Ready” light, secondary ECU “Active” light, graphic display unit for analog or digital display of oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
Lube System
  • Pre-lube strategy, top-mounted dual crankcase breathers, oil filter with service indicators, oil level gauge, oil filler, gear-type oil pump
Power Take-Offs
  • Accessory drives — upper RH, upper and lower LH; two-sided front housing
Protection System
  • A4 electronic control module with customer programmable engine derate strategies, engine alarms and diagnostics displayed on local and remote MPDs, emergency stop pushbutton, safety shutoff protection for oil pressure and water temperature, overspeed protection
General
  • Vibration damper and guard, Cat® yellow paint, two lifting eyes attach to engine block,
ISO Certification
  • Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities
Mounting System
  • Mounting rails
Air Inlet System
  • Air Cleaner Removal
  • Remote Air Inlet Adapters
Charging System
  • Battery Charger
  • Charging Alternator
Control System
  • Throttle Position Sensor
  • Throttle Synchronization
Cooling System
  • Water Level Switch Gauge
  • Coolant Level Sensors
  • Connections
  • Keel Cooling Conversions
  • Heat Exchangers
  • Auxiliary Water Pumps
  • Sea Water Pump Removal
  • Coolant Shunt Tanks
  • Air Separator
  • Marine Gear Cooling
Exhaust System
  • Exhaust Outlet
  • Flexible Fittings
  • Elbows
  • Flanges
  • Flange and Exhaust Expanders
  • Mufflers
Fuel System
  • Fuel Cooler
  • Fuel Priming Pumps
  • Flexible Fuel Lines
  • Rigid Fuel Lines
  • Primary Fuel Filter
  • Fuel level switch
Instrumentation
  • PL1000T Communication Module
  • PL1000E Communication Module
  • Customer Interface
  • Thermocouples
  • Remote Panel Display
  • Remote Cylinder Temperature Display
  • Pilot House Instrument Panels
  • Marine Gear Sensors
  • Engine Vision Display System
Lube System
  • Oil Pan
  • Oil Pan Accessories
  • Sump Pumps
  • Prelubrication Options
  • Lubricating Oil
  • Centrifugal Oil Filter
Mounting System
  • Engine Supports
  • Vibration Isolation Mountings
Power Take-Offs
  • Flexible Coupling and Guards
  • Front Housing Accessories
  • Front Housing Accessory Drives
  • Upper LH Accessory Drive
  • Upper RH Accessory Drive
  • Front Power Take Offs
  • Crankshaft Pulleys
  • Damper Guard Removals
Protection System
  • Air Inlet Shutoffs
  • Switches and Contactors
  • Explosion Relief Valve
  • Sensors
Spare Parts Kits
  • Parts Kits
  • Pump Kits
  • Fuel Transfer
  • Lube Oil
Special Appearance
  • Chrome Plated Relief Valves
  • Black Air Cleaners
Starting System
  • Starting Motors or Barring Device
  • Air Starting Motors Options
  • Starting Aids
  • Battery Sets - 24 Volt - Dry
  • Battery Rack
General
  • Tool Set
  • Caterpillar Datalink Wire