Cat® C0.7 Diesel Engine

The Cat® C0.7 Industrial Diesel Engine is offered at 9 bkW (12 bhp) @ 2200 rpm and meets U.S. EPA Tier 4 Final emission standards. Ratings: 12.2-15.3 bkW (16.4-20.5 bhp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.7 engines include: Compactors/Rollers, General Industrial, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

Get a Quote
Maximum Power 17.8 HP
Maximum Torque 32 lb-ft @ 2400 rpm
Rated Speed 2200-3600 rpm
Minimum Power 11.8 HP
Emissions U.S. EPA Tier 4 Final, EU Stage V
Engine Configuration In-Line 3
Bore 2.6 in
Stroke 2.8 in
Displacement 46.5 in³
Compression Ratio 23.5:1
Aspiration Naturally Aspirated (NA)
Combustion System Indirect Injection
Rotation from Flywheel End Counterclockwise
Length 18.9 in
Width 14.6 in
Height 20.8 in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 156.6 lb
Air Inlet
  • Inlet manifold with choice of inlets.
Control System
  • Alternator 12 volt 14 amp
  • Starter motor 12 volt
  • Glow plug starting aid
Cooling System
  • Belt-driven coolant pump
  • Coolant temperature switch
  • Choice of cooling fans
Flywheel and Flywheel Housing
  • SAE No. 6 1/2 flywheel
  • Choice of SAE No. 5 or standard backplate flywheel housing
Fuel System
  • Fuel injection pump
  • Spin-on fuel filter
  • Electronic Shut-off Solenoid (ESOS)
Lube System
  • Closed circuit breather
  • Spin-on lube oil filter
  • Lube oil pressure switch
  • Lube oil sump
General
  • Cast iron, engine block
  • Cast iron exhaust manifold--side outlet
  • Cold start capability to -20° C (-4° F)
  • Gradeability 35° continuous
  • Paint: Caterpillar yellow, with optional colors available at request