C18 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Get a Quote
Minimum Rating 550 kVA
Maximum Rating 715 kVA
Emissions/Fuel Strategy Low Fuel, China Nonroad III Emis Stds
Voltage 380 to 415 Volts
Frequency 50 Hz
Speed 1500 rpm
Duty Cycle Standby, Prime
Engine Model C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore 5.71 in
Stroke 7.2 in
Displacement 1106.36 in³
Compression Ratio 14.5:1
Aspiration Air to Air Aftercooled
Fuel System Electronic unit injection
Governor Type Ademâ„¢A4
Length - Maximum 162.4 in
Width - Maximum 78.3 in
Height - Maximum 75 in
Air Inlet System
  • Turbocharger
  • Light duty air cleaner
  • Aftercooler core
Air Inlet
  • Air Cleaner
Control System
  • EMCP 4.2
Exhaust
  • Exhaust flange outlet
Cooling
  • Coolant drain line with valve
  • Caterpillar extended life coolant
  • Fan drive, battery charging alternator drive
  • Radiator and cooling fan with guard
Exhaust System
  • Stainless steel exhaust flex gaskets, raincap and SAE exhaustflange for customer use; shipped loose
Fuel
  • Secondary fuel filter
  • Fuel priming pump
  • Primary fuel filter with integral water separator
Fuel System
  • Standard 8 hour open set fuel tank
Generator
  • IP23 Protection
  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
  • Matched to the performance and output characteristics of Cat engines
Generator and Attachments
  • Segregated low voltage (AC/DC) wiring panel
  • Integrated Voltage Regulator
  • A frame generator - IP21 protection
  • Integrated Voltage Regulator
  • Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
  • Power center, IP22
  • Matched to the performance and output characteristics of Cat engines
Power Termination
  • Bus Bar
Governing System
  • Cat Electronic Governor (ADEM A4)
Control Panel
  • EMCP 4 Genset Controller
Lube System
  • Lubricating oil
  • Oil drain valves
Mounting
  • Rubber vibration isolators
Mounting System
  • Captive linear vibration isolators between base and engine-generator.includes lifting provisions and termination points for coolantand lube oil drain lines
Starting/Charging
  • 24 Volt battery with rack and cables
General
  • Engine and alternator pre-paint, Caterpillar yellow
Exhaust
  • Industrial, Residential, Critical Mufflers
Air Inlet System
  • Dual element air cleaner
  • Single element air cleaner
Circuit Breakers
  • 3 Pole (IEC-100% rated) circuit breakers - Motorised
  • 4 Pole (IEC-100% rated) circuit breakers - Motorised
  • Circuit breaker (IEC) auxiliary contacts
  • Pad-lockable circuit breaker device
  • 3 Pole (IEC-100% rated) circuit breakers - Package mounted
  • 4 Pole (IEC-100% rated) circuit breakers - Package mounted
  • Power terminal strip
  • Shunt trip for IEC breaker
Generator
  • Anti-condensation heater
  • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
  • Oversize and premium generators
Power Termination
  • Circuit breakers, IEC compliant
  • Circuit breakers, UL listed
Control Panels
  • Local & remote annunciator modules
  • Load share module
  • Remote monitoring software
  • EMCP (4.2) (4.3) (4.4)
  • Digital I/O module
Control System
  • Oil temperature displays
  • EMCP 4.4
  • Volt free contact
  • Protective devices: Earth fault relay - earth leageage ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - high fuel level alarm - Fuel level sensor
  • Local alarm modules
  • Remote annunciator modules
  • Local alarm horn
Cooling System
  • Low coolant temperature alarm
  • Radiator duct flange
Starting/Charging
  • Oversize batteries
  • Jacket water heater
  • Battery chargers
  • Heavy-duty starting system
  • Charging alternator
Enclosures
  • Sound attenuated enclosures
Exhaust System
  • Manifold and Turbocharger guard
  • Engine mounted muffler
  • 8 and 10 inch elbow kits
  • 8 and 10 inch GP flanges
  • 10, 25 and 35 end in / end outmufflers
Fuel System
  • Integral - Duel wall fuel tank base
  • Manual fuel transfer pump
  • Fuel transfer system
Generator and Attachments
  • LC frame generator
  • Permanent magnet excitation
  • LC frame oversize generators
  • Space heaters
  • A frame oversize generator
  • A frame CIP generator
  • Ingress protection
  • LC frame CIP generator
General
  • Single or dual wall integral fuel tanks
  • UL 2200 package
  • Enclosures: sound attenuated, weather protective
  • EU Certificate of Conformance (CE)
  • Integral & sub-base UL listed dual wall fuel tanks
  • Narrow, Wide or Skid Base
  • The following options are based on regional and product configuration:
  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
  • EEC Declaration of Conformity
  • CSA Certification
  • Sound attenuated, weather protective or high ambient weather protective enclosure
  • Automatic transfer switches (ATS)
  • Single or dual wall sub-base fuel tanks
Lube System
  • Manual sump pump
Starting and Charging
  • Jacket water heaters
  • 5 Amp battery charger
  • Battery disconnect switch