- EQUIPMENT
- ATTACHMENTS
- POWER SYSTEMS
- TECHNOLOGY
- AGRICULTURE
The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.
| Net Power | 74 HP |
| Rated Net Power - 2,400 rpm - SAE J1349 | 71.9 HP |
| Maximum Gross Power - ISO 14396 | 73.2 HP |
| Emissions | *The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards. |
| Engine Model | Cat® C3.3B DIT* |
| Maximum Gross Power | 73 HP |
| Stroke | 4.7 in |
| Bore | 3.7 in |
| Note (4) | Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Displacement | 201 in³ |
| Rated Net Power - ISO 9249 | 72.9 HP |
| Maximum Gross Torque - ISO 14396 | 192 ft·lbf |
| Note (6) | Stage V engine available for Europe only. |
| Note (5) | The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard. |
| Note (2) | Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed. |
| Maximum Gross Power - ISO 14396 (metric) | 74.2 HP |
| Operating Weight | 12677 lb |
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured with a 1.0 m³ (1.31 yd³) bucket with bolt-on cutting edge. |
| Engine Crankcase | 3 gal (US) |
| Hydraulic System - Including Tank | 18.5 gal (US) |
| Fuel Tank | 20.6 gal (US) |
| Cooling System | 4.5 gal (US) |
| Axles - Rear | N/A |
| Axles - Front | N/A |
| Transmission - Gear Box | 2.2 gal (US) |
| Hydraulic Tank | 12.2 gal (US) |
| Rated Bucket Capacity | 1.31 yd³ |
| Clearance - Full Lift and 45° Dump | 7.97 ft |
| Reach - Full Lift and 45° Dump | 2.6 ft |
| Steering Articulation Angle - Each Direction | 39° |
| Full Turn Tipping Load | 7716 lb |
| Tipping Load - Full Turn - ISO 14397-1 | 7339 lb |
| Tipping Load - Straight - ISO 14397-1 | 9007 lb |
| Relief Pressure - Tilt Cylinder Head | 4496 psi |
| 3rd Function Maximum Working Pressure | 3408 psi |
| Maximum Flow - Implement Pump - Auxiliary Function Standard Flow | 19 gal/min |
| Relief Pressure - Tilt Cylinder Rod | 2756 psi |
| Maximum Flow - Implement Pump | 19 gal/min |
| Maximum Flow - Implement Pump - Auxiliary Function High Flow | 31 gal/min |
| Maximum Working Pressure - Implement Pump | 3408 psi |
| Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height | 3 s |
| Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Tilt Cylinder, Double Acting - Stroke | 16.4 in |
| Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.5 s |
| Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift | 9.6 s |
| Lift Cylinder, Double Acting - Rod Diameter | 2 in |
| Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time | 9.6 s |
| Lift Cylinder, Double Acting - Stroke | 27.4 in |
| Lift Cylinder, Double Acting - Bore Diameter | 3 in |
| Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height | 1.5 s |
| Tilt Cylinder, Double Acting - Rod Diameter | 2.2 in |
| Tilt Cylinder, Double Acting - Bore Diameter | 3.5 in |
| Boost Flow Maximum Pressure | 3191 psi |
| Note (2) | **Vary with tire. |
| Departure Angle | 33° |
| Height - Ground to Cab** | 8.42 ft |
| Clearance - Level Bucket** | 9.92 ft |
| Length - Overall* | 17.92 ft |
| Dump Angle at Full Lift | 45° |
| Dig Depth** | 3.7 in |
| Machine Width | 6 ft |
| Operating Weight | 12913 lb |
| Height - Ground Clearance** | 11 in |
| Reach - Bucket at 45°* | 2.33 ft |
| Turning Radius - Inside of Tires | 7.33 ft |
| Width - Tread Center | 4.58 ft |
| Note (1) | *Vary with bucket. |
| Clearance - Bucket at 45° * | 8.08 ft |
| Length - Wheel Base | 7.08 ft |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Width - Bucket | 6.67 ft |
| Height - Bucket Pin** | 10.58 ft |
| Articulation Angle | 39° |
| Turning Radius - Over Bucket | 14.67 ft |
| Clearance - Level Bucket** | 9.92 ft |
| Width - Tread Center | 4.58 ft |
| Machine Width | 6 ft |
| Turning Radius - Inside of Tires | 7.33 ft |
| Turning Radius - Over Bucket | 14.67 ft |
| Length - Overall* | 18.42 ft |
| Dig Depth** | 4.2 in |
| Operating Weight | 12913 lb |
| Height - Bucket Pin** | 10.58 ft |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Clearance - Bucket at 45° * | 7.67 ft |
| Width - Bucket | 6.67 ft |
| Height - Ground to Cab** | 8.42 ft |
| Dump Angle at Full Lift | 45° |
| Reach - Bucket at 45°* | 2.67 ft |
| Height - Ground Clearance** | 11 in |
| Length - Wheel Base | 7.08 ft |
| Articulation Angle | 39° |
| Departure Angle | 33° |
| Note (1) | *Vary with bucket. |
| ROPS | ROPS: ISO 3471:2008 |
| FOPS | FOPS: ISO 3449:2005 Level II |
| Note (3) | *The measurements were conducted with the cab doors and windows closed. |
| Note (2) | The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). Optional Low Sound or Blue Angel selection will reduce this to 99 dB(A). |
| Note (1) | Cat Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Maximum Steering Torque - 0° (Straight Machine) | 37155 ft·lbf |
| Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm | 3 s |
| Nominal Flow - Steering Pump | 12 gal/min |
| Maximum Steering Torque - 39° (Full Turn) | 27747 ft·lbf |
| Steering Cylinder, Double Acting - Bore Diameter | 3.1 in |
| Steering Articulation Angle - Each Direction | 39° |
| Maximum Working Pressure - Steering Pump | 3191 psi |
| Steering Cylinder, Double Acting - Rod Diameter | 1.4 in |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | <6 turns |
| Steering Cylinder, Double Acting - Stroke | 11.8 in |
| Note | All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. |
| Grapple | 0.9 m³ (1.2 yd³) heaped |
| Multi-Purpose | 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³) |
| Light Material | 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³) |
| General Purpose | 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³) |
| Bucket Capacities - ISO Coupler | 0.75-1.5 m3 |
| Bucket Capacities - SSL Style Coupler | 1.0-2.0 yd3 |
| Note (4) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Option (2) | 340/80 R18 AT-R Firestone |
| Option (7) | 12.5/80 R18 Flexport™ |
| Note (3) | In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities. |
| Note (1) | *Standard tire. |
| Option (1) | 335/80 R18 XZSL Michelin |
| Option (6) | 405/70 R18 SPT9 Dunlop* |
| Option (5) | 340/80 R18 Bibload Michelin |
| Option (4) | 340/80 R18 TRI2 Nokian |
| Option (3) | 340/80 R18 XMCL Michelin |
| Note (2) | Other tire choices available, contact your Cat dealer for details. |
| Forward - Range 2 | 12 mile/h |
| Forward - High Range | 22 mile/h |
| Reverse - Range 2 | 12 mile/h |
| Forward - Range 1 | 6 mile/h |
| Reverse - Range 1 | 6 mile/h |
| Reverse - High Range | 22 mile/h |
DEALS
USED
RENTALS
Financing
Service Request
Locations
Careers
