AD45 Underground Articulated Truck

Engine Model	Cat® C18
Engine Gross Power - ISO 14396	599 HP
Bore	5.7 in
Stroke	7.2 in
Displacement	1104.53 in³
Note (2)	All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Note (5)	Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (4)	Optional Ventilation Reduction Package available.
Note (3)	Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (1)	Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Emissions - EU Stage V Engine - Net Power - SAE J1349:2011	573 HP
Emissions - EU Stage V Engine - Engine Power - ISO 14396:2002	599 HP
Emissions - Ventilation Reduction (VR) Engine - Net Power - SAE J1349:2011	563 HP
Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Engine Power - ISO 14396:2002	589 HP
Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Net Power - SAE J1349:2011	563 HP
Emissions - Ventilation Reduction (VR) Engine - Engine Power - ISO 14396:2002	589 HP
Note (6)	Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (7)	*<5 %

Nominal Payload Capacity	99208 lb
Gross Machine Mass	196765 lb
Body Capacities	18.0-25.1 m³ (23.5-32.8 yd³)
Shipping Mass (Stage V Engine Model)	96225 lb
Shipping Mass (Other Engine Models)	94415 lb

Operating Mass + Rated Payload	190495 lb
Operating Mass - Rear Axle	26720 lb
Operating Mass	91285 lb
Operating Mass + Rated Payload - Rear Axle	101260 lb
Operating Mass - Front Axle	64565 lb
Operating Mass + Rated Payload - Front Axle	89235 lb

Operating Mass - Rear Axle	27095 lb
Operating Mass + Rated Payload - Front Axle	85355 lb
Operating Mass - Front Axle	61225 lb
Operating Mass + Rated Payload	187530 lb
Operating Mass	88320 lb
Operating Mass + Rated Payload - Rear Axle	102175 lb

Empty - Front Axle	70.7%
Loaded - Rear Axle	53.2%
Empty - Rear Axle	29.3%
Loaded - Front Axle	46.8%

Loaded - Rear Axle	54.5%
Empty - Rear Axle	30.7%
Empty - Front Axle	69.3%
Loaded - Front Axle	45.5%

Forward - 1	4.4 mile/h
Forward - 2	5.9 mile/h
Forward - 3	8 mile/h
Forward - 4	10.8 mile/h
Forward - 5	14.6 mile/h
Forward - 6	19.7 mile/h
Forward - 7	26.4 mile/h
Reverse - 1	4.2 mile/h
Reverse - 2	5.6 mile/h
Note	Maximum travel speeds with standard 29.5 × R29 tires.

Differential Ratio	3.46:1
Final Drive Ratio	5.65:1
Total Reduction Ratio	19.55:1

Lower	21 Seconds
Total Cycle Time	36 Seconds
Raise	15 Seconds

Total Cycle Time	35 Seconds
Raise	14 Seconds
Lower	21 Seconds

Ejector Body	29.9 yd³
Note	Heaped SAE 2:1.
Dump Body - 2 - Standard	27.9 yd³
Dump Body - 1	23.6 yd³
Dump Body - 3	32.8 yd³

Articulation Angle	42.5°
Frame Oscillation	10°
Outside Clearance Radius*	371 in
Inside Clearance Radius*	209 in
Note	*Clearance dimensions are for reference only.

Engine Crankcase - With Filter	16.9 gal (US)
Transmission	15.9 gal (US)
Hydraulic Tank	70.3 gal (US)
Cooling System	22.5 gal (US)
Front Differential and Final Drives	20.3 gal (US)
Rear Differential and Final Drives	21.9 gal (US)
Fuel Tank	201.8 gal (US)

Tire Size	29.5 × R29

Standards	ROPS/FOPS Certified Cab

ELECTRICAL

12V power supply in cab
Alternator, 95-amp
Auxiliary start receptacle
Battery disconnect switch, ground level
Circuit breaker, 80-amp
Corrosive protection spray
Diagnostic connector
Electric starting, 24V
Engine shutdown switch, ground level
– Front left hand side
Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED
Low maintenance batteries
Reversing alarm
Starting and charging system

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)
Electric horns
Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer
Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal
Low hydraulic level warning
Open operator station ROPS/FOPS structure
Operator presence system (auto park brake)
Rearview mirrors
Suspension seat Cat Comfort TLV2 with retractable seat belt
Trainer/passenger seat and seat belt
Tilt/telescopic steering wheel
Turn signal indicators

POWER TRAIN

Cat C18 ATAAC diesel engine, 6-cylinder
Automatic brake retarder control
Auto shift transmission 7 speed forward/2 speed reverse
Control throttle shifting
Engine air intake precleaner
Electric fuel priming pump
Exhaust, turbo compartment shielding
Four wheel drive
Long life coolant
Programmable ground speed limiting
Programmable gear block out with tray up
Radiator cap manual release
Radiator, cross flow
SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
Torque converter, standard with automatic lockup

OTHER STANDARD EQUIPMENT

Body, dump, (21.3 m³, 27.9 yd³)
Catalytic exhaust purifier/muffler group
Centralized lubrication points
Decals, international picto graphics
Dual fuel tanks
Engine and transmission belly guards
Fenders, front, rear flaps
Fire wall
Fuel system manual shut off tap
Front axle suspension
Frame lifting lugs
Front and rear tow pin
Front rubber bumpers
Gauges, brake pressure
Hand hold (access on/off top deck)
Hitch, articulated and oscillated
Operation and Maintenance Manual – English and other applicable local languages to select
S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil
Swing out radiator grill
Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

OPTIONAL EQUIPMENT

Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch
Body dump
– Body (18.0 m³, 23.5 yd³)
– Body (25.1 m³, 32.8 yd³)
Body ejector
– Ejector (22.9 m³, 30.0 yd³)
Body liners, impact and/or wear
– 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
– 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
– 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
– 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)
Body wear plate, external
– 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
– 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
– 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)
Camera
– Color rear facing
– Color loading
Cover, anti vandalism for shipping
Engine options
– Engine, Stage V
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)
DPF (Flow Through) Filter
Fast fill system
– Coolant
– Engine oil
– Fuel (dual tanks)
– Hydraulic oil
– Transmission oil
Fire suppression system
– Ansul, wet
Fluids
– Arctic fuel
– Arctic coolant
Handrail Extension
Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body
Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded)
Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door
Park brake switch engagement
– Push to apply
– Pull to apply
Payload
– Truck Payload Measurement System (TPMS)
– Remote display for TPMS
Reflective tape
Rims
– Rim identification numbering
– Spare, tubeless
Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical
Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion
Secondary steering system
Service tools
– Collet jacking bolts, dump or ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available
Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer
Technology
– Product Link Elite (PLE) system
Tire arrangements
– Tire, 29.5 × R29 VSNT Bridgestone
– Tire, 29.5 × R29 VSDL Bridgestone
Torque converter, high altitude, 3000 m (9,842 ft) and up
NOTE: Not all features are available in all regions. See your Cat dealer for more information.

AD45 Underground Articulated Truck

Engine

Operating Specifications

Weights (Stage V Engine Model)

Weights (Other Engine Models)

Weight Distribution (Stage V Engine Model)

Weight Distribution (Other Engine Models)

Transmission

Final Drives

Body Hoist (Stage V Engine Model)

Body Hoist (Other Engine Models)

Body Capacities

Turning Dimensions

Service Refill Capacities

Tires

Standards

ELECTRICAL

OPERATOR ENVIRONMENT

POWER TRAIN

OTHER STANDARD EQUIPMENT

OPTIONAL EQUIPMENT