AD30 Underground Mining Truck

Engine Model	Cat® C15
Gross Power - SAE J1995	409 HP
Gross Power - VR Engine - SAE J1995	409 HP
Gross Power - Tier 3 Engine - SAE J1995	409 HP
Bore	5.4 in
Stroke	6.8 in
Displacement	928 in³
Note (3)	Engine derate will commence at an altitude of 2743 m (8,999 ft).
Note (2)	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995	409 HP
Rated Power	1800 r/min
Note (1)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (4)	Optional Ventilation Reduction package available.
Note (5)	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.

Nominal Payload Capacity	66139 lb
Gross Machine Mass	132300 lb
Body Capacities	11.3-17.5 m³ (14.8-22.9 yd³)

Empty	63647 lb
Loaded	132277 lb
Empty - Rear Axle	20704 lb
Loaded - Rear Axle	73826 lb
Empty - Front Axle	42944 lb
Loaded - Front Axle	58451 lb

Empty - Rear Axle	32.50%
Loaded - Front Axle	44.20%
Loaded - Rear Axle	55.80%
Empty - Front Axle	67.50%

Forward - 1	3.9 mile/h
Forward - 2	7 mile/h
Forward - 3	12.9 mile/h
Forward - 4	22.8 mile/h
Reverse - 1	4.4 mile/h
Note	Maximum travel speeds with standard 26.5 × R25 tires.

Differential Ratio	3.38:1
Final Drive Ratio	4.76:1
Total Reduction Ratio	16.13:1
Note	Fully floating axles.

Raise	10.5 s
Lower	11.2 s
Total Cycle Time	21.7 s

Body 1	14.8 yd³
Body 2 - Standard Body	18.8 yd³
Body 3	22.9 yd³
Wide Body	21.9 yd³
Ejector Body (1)	19.9 yd³
Ejector Body (2)	21.9 yd³
Note	Heaped SAE 2:1.

Outside Clearance Radius	337.4 in
Inner Clearance Radius	198 in
Articulation Angle	42.5 °
Frame Oscillation	10 Degrees

Engine Crankcase - With Filter	9 gal (US)
Transmission	18 gal (US)
Hydraulic Tank	38 gal (US)
Cooling System	20 gal (US)
Front Differential and Final Drives	15 gal (US)
Rear Differential and Final Drives	15 gal (US)
Fuel Tank	108 gal (US)

Tire Size	26.5 × R25 VSNT

Standards	ROPS/FOPS Certified Cab

ELECTRICAL

12V power supply in cab
Alternator, 95-amp
Auxiliary start receptacle
Battery disconnect switch, ground level
Circuit breaker, 80-amp
Corrosive protection spray
Diagnostic connector
Electric starting, 24V
Engine shutdown switch, ground level
– Front left hand side
Lighting
– Brake and tail light, LED
– Headlights with dimmer switch, halogen
– Rear work light (cab mounted), halogen
– Reversing lights, halogen
Low maintenance batteries
Reversing alarm
Starting and charging system

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)
Electric horns
Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer
Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal
Low hydraulic level warning
Open operator station ROPS/FOPS structure
Operator presence system (auto park brake)
Rearview mirrors
Suspension seat Cat Comfort TLV2 with retractable seat belt
Trainer/passenger seat and seat belt
Tilt/telescopic steering wheel

POWER TRAIN

Cat C15 ATAAC diesel engine, 6-cylinder
Automatic brake retarder control
Auto shift transmission 4 speed forward/1 speed reverse
Axle, arrangement standard width, front – rear
Control throttle shifting
Engine air intake precleaner
Electric fuel priming pump
Exhaust, turbo compartment shielding
Four wheel drive
Long life coolant
Programmable ground speed limiting
Programmable gear block out with tray up
Radiator cap manual release
Radiator, cross flow
Rims, 5-piece, tubeless
SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
Torque converter with automatic lockup

OTHER STANDARD EQUIPMENT

Body, dump, (14.4 m³/18.8 yd³)
Catalytic exhaust purifier/muffler group
Centralized lubrication points
Decals, international picto graphics
Engine and transmission belly guards
Fenders, standard with, front, rear flaps
Fire wall
Fuel system manual shut off tap
Frame lifting lugs
Front and rear tow pin
Hand hold (access on/off top deck)
Hitch, articulated and oscillated
Operation and Maintenance Manual – English and other applicable local languages to select
S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil
Swing out radiator grill
Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

OPTIONAL EQUIPMENT

Axle, arrangement wide body, front – rear
Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch
Body dump
– Body, (11.3 m³/14.8 yd³)
– Body, (16.8 m³/21.9 yd³) wide body configuration
– Body, (17.5 m³/22.9 yd³)
Body ejector
– Ejector, (15.2 m³/19.9 yd³)
– Ejector, (16.8 m³/21.9 yd³)
Body liners, impact and wear
– 10 mm (0.4"), body, dump (11.3 m³/14.8 yd³)
– 10 mm (0.4"), body, dump (14.4 m³/18.8 yd³)
– 10 mm (0.4"), dump (16.8 m³/21.9 yd³) for wide body configuration
– 10 mm (0.4"), body, dump (17.5 m³/22.9 yd³)
Brake pressure gauges
Camera, color rear facing
Cover, anti vandalism for shipping
Engine options
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)
- DPF (Flow Through) Filter
Fast fill system
– Coolant
– Engine oil
– Fuel (single tank)
– Hydraulic oil
– Transmission oil
Fenders, wide body, front, rear flaps
Fire suppression system
– Ansul, dry powder
– Foam, water based
Fluids
– Arctic fuel
– Arctic coolant
Lighting
– Headlights with dimmer switch, LED
– Rear work light (cab mounted), LED
– Reversing lights, LED
Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body
Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded)
Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door
Park brake switch engagement
– Push to apply
– Pull to apply
Payload
– Truck Payload Measurement System (TPMS)
– Remote display for TPMS
Reflective tape
Rims
– Rim identification numbering
– Spare, tubeless
Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical
Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion
Secondary steering system
Service tools
– Collet jacking bolts, dump and ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available
Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer
Technology
– Vital Information Management System (VIMS) Gen 3
Tire arrangements
– Tire, 26.5 × 25 VSNT Bridgestone
– Tire, 26.5 × 25 VSDL Bridgestone
NOTE: Not all features are available in all regions. See your Cat dealer for more information.

AD30 Underground Mining Truck

Engine

Operating Specifications

Weights

Weight Distribution

Transmission

Final Drives

Body Hoist

Body Capacities

Turning Dimensions

Service Refill Capacities

Tires

Standards

ELECTRICAL

OPERATOR ENVIRONMENT

POWER TRAIN

OTHER STANDARD EQUIPMENT

OPTIONAL EQUIPMENT