- EQUIPMENT
- ATTACHMENTS
- POWER SYSTEMS
- TECHNOLOGY
- AGRICULTURE
The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.
| Maximum Gross Power | 168 HP |
| Bore | 4 in |
| Stroke | 5 in |
| Displacement | 427 in³ |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP |
| Maximum Rated Gross Power - ISO 14396 | 168 HP |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf |
| Engine Model | Cat® C7.1 |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600 r/min |
| Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. |
| Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | 170 HP |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 HP |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 HP |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 HP |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | 572 ft·lbf |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | 162 HP |
| Net Power (Performance Power Mode: Range 1-4) | 1800 r/min |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP |
| Net Power (Standard Power Mode: Range 1-3*) | 1600 r/min |
| Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) |
| Operating Weight | 31848 lb |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. |
| Operating Weight (1) | 14 374 kg (31,689 lb)** |
| Operating Weight (2) | 14 446 kg (31,848 lb)~ |
| ROPS | ISO 3471:2008 |
| Declared Sound Levels | Declared Sound Levels<br>– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*<br>– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
| FOPS | ISO 3449:2005 LEVEL II |
| Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees |
| Rear Axle | Oscillating |
| Brakes - Parking | Spring applied hydraulically released |
| Rear Axle - Traction Aid - Optional | Limited slip differential |
| Front Axle | Fixed |
| Brakes - Service | Inboard wet disc |
| Note (2) | Offset rims available to meet European roading requirements. |
| Front Axle - Traction Aid* | Locking differential (standard) |
| Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. |
| Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
| Lift Cylinder, Double Acting - Rod Diameter | 2.6 in |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min |
| Maximum Flow - Implement Pump | 50 gal/min |
| Relief Pressure - Tilt Cylinder | 4061 psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.1/5.7 seconds |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds |
| Lift Cylinder, Double Acting - Stroke | 28.7 in |
| Tilt Cylinder, Double Acting - Rod Diameter | 3.5 in |
| Tilt Cylinder, Double Acting - Stroke | 21.9 in |
| Lift Cylinder, Double Acting - Bore Diameter | 4.7 in |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.7/2.7 seconds |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Tilt Cylinder, Double Acting - Bore Diameter | 5.9 in |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
| Maximum Working Pressure - Implement Pump | 3771 psi |
| Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.3/10.1 seconds |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min |
| Forward and Reverse - Range 3 | 17 mile/h |
| Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 2 | 8 mile/h |
| Forward and Reverse - Range 4 | 25 mile/h |
| Rear Axles | 6.6 gal (US) |
| Front Axles | 6.9 gal (US) |
| Hydraulic Tank | 23.8 gal (US) |
| Engine Crankcase | 5.3 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) |
| Transmission - Gear Box | 2.2 gal (US) |
| Cooling System | 7.9 gal (US) |
| Hydraulic System - Including Tank | 43.6 gal (US) |
| Fuel Tank | 51.5 Gal |
| Maximum Flow - Steering Pump | 34 gal/min |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s |
| Maximum Working Pressure - Steering Pump | 3500 psi |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in |
| Steering Cylinder, Double Acting - Stroke | 17.2 in |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. |
| Full Turn Tip Load (2) | 9302 kg (20,507 lb)~ |
| Full Turn Tip Load (1) | 9203 kg (20,289 lb)** |
DEALS
USED
RENTALS
Financing
Service Request
Locations
Careers
