463 mm (18 in) Pin Lock Heavy Duty Bucket - Altorfer    

463 mm (18 in) Pin Lock Heavy Duty Bucket

463 mm (18 in) Pin Lock Heavy Duty Bucket

Cat® Heavy Duty Buckets for Backhoe Loaders are well suited for semi-rocky soil or where hard bank material must be broken out and removed.

Specifications

Capacity
7ft³

Dimensions

Tip Radius
45in
Width
18in
Weight
551lb
Base Edge Thickness
1.3in
Capacity
7ft³
Interface Type
Pin Lock

Interface Type

Interface Type
Pin lock

Power Rating

Minimum Power
11HP
Maximum Power
13.7HP
Maximum Torque
21.9lb-ft @ 2400 rpm
Rated Speed
2800-3600 rpm

General

Bore
2.64in
Stroke
2.83in
Displacement
31in³
Aspiration
Naturally aspirated
Rotation from Flywheel End
Anti-clockwise
Combustion System
Indirect injection
Compression Ratio
23.5:1
Cooling System
Liquid
Cycle
4 stroke
Number of Cylinders
2 inline
Total Coolant Capacity
0.3gal (US)
Total Lubricating Capacity
0.5gal (US)

Engine Dimensions*

Dry Weight
126lb
Height
20.6in
Length
16in
Width
14.6in

Standard Equipment

  • Air Inlet System
    • Cast iron exhaust manifold - side outlet
    • Inlet manifold
  • Control System
    • 12 volt alternator
    • 12 volt starter motor
    • Electronic Shut Off Solenoid (ESOS)
  • Cooling System
    • Coolant pump belt driven
    • Coolant temperature switch
    • Cooling fan
  • Fuel System
    • Fuel injection pump
    • Spin on fuel filter
  • General
    • Cast iron engine block
    • Closed circuit breather
    • Glow plug starting aid
    • Cold start capability to –20°C (-4°F) (aided)
    • Gradeability 35° continuous
  • Oil System
    • Lubricating oil pressure switch
    • Lubricating oil sump
    • Spin on lubricating oil filter