Cat® C9 Industrial Power Unit

Cat® C9 Industrial Power Unit

Power Rating

Maximum Power
350HP
Minimum Power
275HP
Rated Speed
1800-2200 rpm
Maximum Power
350HP
Rated Speed
1800-2200 rpm
Minimum Power
275HP

Emission Standards

Emissions
China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
Emissions
China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
4.4in
Stroke
5.9in
Displacement
537in³
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
16.3:1
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
4.4in
Stroke
5.9in
Displacement
537in³
Compression Ratio
16.3:1
Aspiration
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Power Unit Dimensions - Approximate

Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
1490 kg (3285 lb)
Height
2008.1 mm (79.06 in)
Width
987.8 mm (38.89 in)
Length
2174.4 mm (85.81 in)

Power Unit Dimensions

Weight
3285lb
Width
38.9in
Width
38.9in
Weight
3285lb

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • HEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request