Cat® C27 Diesel Engine - Altorfer    

Cat® C27 Diesel Engine

Cat® C27 Diesel Engine

The Cat® C27 Industrial Diesel Engine is offered in ratings ranging from 597-783 bkW (800-1050 bhp) @ 1800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards.

General

Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Cooling System Capacity
67.9 L (71.7 qt)
Lube System (refill)
68 L (71.9 qt)
Bore
5.4in
Stroke
6in
Displacement
1649.5in³
Aspiration
Twin Turbocharged-Aftercooled (TTA)
Compression Ratio
16.0:1
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Engine Configuration
V-12
Bore
137.2 mm (5.4 in)
Stroke
152.4 mm (6 in)
Displacement
27 L (1649.5 in³)
Cooling System - Capacity
67.9 L (71.7 qt)
Lube System - Refill
68 L (71.9 qt)
Aftertreatment
DOC

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1874 mm (73.8 in)
Width
1600 mm (63 in)
Height
1370 mm (53.9 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
3004 kg (6625 lb)

Power Rating

Minimum Power
800HP
Maximum Power
1050HP
Rated Speed
1800 rpm
Maximum Torque
3448lb-ft @ 1200 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final

Engine Dimensions - Approximate

Height
1370 mm (53.9 in)
Length
1874 mm (73.8 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3004 kg (6625 lb)
Width
1600 mm (63 in)
Width
63in
Height
53.9in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
6625lb
Length
73.8in

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Rear sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
    • Vibration damper
    • Lifting eyes