Cat® C0.7 Diesel Engine - Altorfer    

Cat® C0.7 Diesel Engine

Cat® C0.7 Diesel Engine

The Cat® C0.7 Industrial Diesel Engine is offered at 9 bkW (12 bhp) @ 2200 rpm and meets U.S. EPA Tier 4 Final emission standards. Ratings: 12.2-15.3 bkW (16.4-20.5 bhp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.7 engines include: Compactors/Rollers, General Industrial, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

General

Engine Configuration
In-Line 3, 4-Stroke-Cycle Diesel
Cooling System Capacity
1.2 L (1.27 qt)
Lube System (refill)
2.35-3.05 L (2.48-3.22 qt)
Bore
2.6in
Stroke
2.8in
Displacement
46.5in³
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23.5:1
Combustion System
Indirect Injection
Rotation from Flywheel End
Counterclockwise
Engine Configuration
In-Line 3
Bore
67 mm (2.64 in)
Stroke
72 mm (2.83 in)
Displacement
0.76 L (46.5 in³)
Cooling System - Capacity
1.2 L (1.27 qt)
Lube System - Refill
2.35-3.05 L (2.48-3.22 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
480 mm (18.9 in)
Width
371 mm (14.6 in)
Height
528 mm (20.8 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
71 kg (156.6 lb)

Power Rating

Minimum Power
11.8HP
Maximum Power
17.8HP
Rated Speed
2200-3600 rpm
Maximum Torque
30lb-ft @ 1800 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage V

Engine Dimensions - Approximate

Length
18.9in
Height
528 mm (20.8 in)
Length
480 mm (18.9 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
71 kg (156.6 lb)
Width
371 mm (14.6 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
156.6lb
Width
14.6in
Height
20.8in

Standard Equipment

  • Air Inlet
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request