G3520J Gas Compression Engine - Altorfer    

G3520J Gas Compression Engine

G3520J Gas Compression Engine

The line of G3520J engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3520J engines include primary gathering, central gathering, and gas processing plants.

Engine Specifications

Minimum Rating
1725BHP
Emissions
U.S. EPA Spark Ignited Stationary NSPS emissions for 2010
Bore
6.7in
Rotation from Flywheel End
Counterclockwise
Stroke
7.5in
Combustion
Lean Burn
Oil Change Interval
1000

Governor and Protection

Governor and Protection
Electronic (ADEM™ A3)

Standard Equipment

  • Air Inlet System
    • Axial Flow Air cleaner
    • Single element canister type with service indicator
  • Cooling System
    • Two-stage charge air cooling: First stage - JW + OC + 1st stage AC / Second stage - 2nd stage AC
    • Jacket water and aftercooler thermostats
  • Exhaust System
    • Water-cooled exhaust manifolds
    • Dry turbocharger housings
    • Water-cooled exhaust elbow
  • Flywheels And Flywheel Housings
    • SAE No. 21 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • 7-40 psig gas supply
    • Electronic fuel metering valve
    • Gas pressure regulator
    • Gas shutoff valve
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Product Link cellular radio
  • Lubrication System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — 143 gal
    • Oil sampling valve
    • Turbo oil accumulator
  • Mounting System
    • Rails
  • Power Take-offs
    • Front housing — two-sided
    • Front lower LH accessory drive
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and guard

Optional Equipment

  • Air Inlet System
    • Round air inlet adaptors
    • Rain shield
  • Charging System
    • CSA alternator (24V,65A)
  • Cooling System
    • Jacket water inlet flange-hose connection
  • Exhaust System
    • Flexible fittings
    • Flanges
    • Elbow
  • Fuel System
    • Fuel filter
  • Instrumentation
    • LAN adapter
    • 15',40',90',140' Product Link extension harness
    • 20',30',50',100' interconnect harness
  • Lubrication System
    • Lubricating oil
    • Oil bypass filter
    • Air prelube pump
    • Oil pan drain
  • Power Take-offs
    • Front stub shaft
    • Crankshaft pulley
  • Starting System
    • Air pressure regulator
    • 90 psi starter
    • 150 psi starter
    • Jacket water heater
  • General
    • Special paint
    • Crankshaft vibration double damper
    • Explosion relief valves
  • Eu Certification
    • EEC DOI certification