G3408C Low Emissions Gas Compression Engine

G3408C Low Emissions Gas Compression Engine

Engine Specifications

Minimum Rating
425.0bhp
Maximum Rating
425.0bhp
Emissions
NSPS Site Compliant Capable or Non-regulated
Displacement
1099.0in3
Compression Ratio
8.5:1
Aspiration
Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6.0in
Bore
5.4in
Weight - Dry
4950lb
Ignition, Protection
Cat EIS
Minimum Rating
425BHP
Maximum Rating
425BHP
Emissions
NSPS Site Compliant Capable or Non-regulated
Displacement
1099in³
Compression Ratio
8.5:1
Aspiration
Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6in
Bore
5.4in

Capacity for Liquids

Cooling System
14.5gal
Lube Oil System (refill)
39.0gal
Cooling System
14.5gal (US)
Lube Oil System - Refill
39gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Electronic governor
    • Air/fuel ratio control
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator (1.5 to 5 psi gas supply required)
    • Natural gas carburetor
  • Ignition System
    • Cat Electronic Ignition System (EIS) with detonation sensitive timing
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — deep sump
    • Oil filler — RH in valve cover and RH dipstick
  • Mounting System
    • Engine supports
  • Protection System
    • Detonation sensitive timing control
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and pulleys
    • Lifting eyes
    • Cylinder block inspection covers

Optional Equipment

  • Air Inlet System
    • Air cleaner — two-stage
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • Expansion tank
    • Heat exchangers
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
    • Exhaust manifold — instrument holes at each port
  • Fuel System
    • Dual gas regulator
    • Carburetor kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch and clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor
    • Air pressure regulator
    • Air silencer
    • Electric start control
    • Electric starting motors — single 24V
    • Starting aids
    • Battery sets — (24V dry), cables, and rack
  • General
    • Special paint