G3408 Gas Compression Engine

G3408 Gas Compression Engine

Engine Specifications

Minimum Rating
255.0bhp
Maximum Rating
400.0bhp
Emissions
NSPS Site Compliant Capable or non-regulated
Displacement
1099.0in3
Compression Ratio
9.7:1
Aspiration
Naturally Aspirated or Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6.0in
Bore
5.4in
Weight - Dry
3700lb
Ignition, Protection
Altronic III
Minimum Rating
255BHP
Maximum Rating
400BHP
Emissions
NSPS Site Compliant Capable or non-regulated
Displacement
1099in³
Compression Ratio
9.7:1
Aspiration
Naturally Aspirated or Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6in
Bore
5.4in

Capacity for Liquids

Cooling System
14.5gal
Lube Oil System (refill)
12.2gal
Cooling System
14.5gal (US)
Lube Oil System - Refill
12.2gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Governor — Woodward PSG mechanical
    • Governor control — positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Ignition System
    • Digital ignition system
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Auxiliary oil reservoir
    • Rear sump oil pan
    • Oil filler in valve cover and dipstick — RH
  • Mounting System
    • Engine supports
  • Protection System
    • Shutoffs
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes

Optional Equipment

  • Air Inlet System
    • Air cleaner — dual element
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Control System
    • EG3P/2301A speed control governor
    • PSG electric governor
    • PSG pneumatic governor
  • Cooling System
    • Radiators
    • Non-sparking blower fan
    • Blower fan and fan drives for customer suppliedradiators
    • ATAAC conversion
    • Aftercooler
    • Expansion tank
    • Heat exchanger
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
    • Exhaust manifold
  • Fuel System
    • Dual gas regulator
    • Low energy fuel carburetor
    • Low pressure gas conversion
    • Propane and natural gas valve and jet kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply — digital ignition system
  • Instrumentation
    • Gauges and instrument panels
  • Lube System
    • Auxiliary oil reservoir removal
    • Lubricating oil
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch
    • Clutch support
    • Front stub shaf
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
  • Starting System
    • Air starting motor
    • Electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motor — single 24-volt
    • Starting aids
    • Battery sets (24-volt dry), cables, and rack