G3306B Gas Compression Engine

G3306B Gas Compression Engine

Engine Specifications

Minimum Rating
145.0bhp
Maximum Rating
211.0bhp
Emissions
NSPS 2010
Displacement
638.0in3
Compression Ratio
10.5:1
Aspiration
Naturally Aspirated or Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
156
Oil Change Interval
750 hours
Stroke
6.0in
Bore
4.8in
Weight - Dry
2450lb
Ignition, Protection
ADEM A4
Air/Fuel Ratio Control
ADEM A4
Minimum Rating
145BHP
Maximum Rating
211BHP
Emissions
NSPS 2010
Displacement
638in³
Compression Ratio
10.5:1
Aspiration
Naturally Aspirated or Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
156
Oil Change Interval
750 hours
Stroke
6in
Bore
4.8in

Capacity for Liquids

Cooling System
5.25gal
Lube Oil System (refill)
11.9gal
Cooling System
5.25gal (US)
Lube Oil System - Refill
11.9gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — intermediate duty, dry
    • Air cleaner rain cap (shipped loose)
    • Service indicator
  • Control System
    • ADEM A4
  • Cooling System
    • Thermostats and housing — full open temperature 97°C (207°F)
    • Jacket water pump — gear-driven, centrifugal, non-self-priming
  • Exhaust System
    • Exhaust manifolds — watercooled
    • Exhaust elbow — dry
    • 102 mm (4 in)
    • Three-way catalyst — 1.0 g NOx and 0.5 g NOx catalyst options
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 1
    • Flywheel housing, SAE No. 1
    • SAE standard rotation
  • Fuel System
    • Air/fuel ratio control
    • Gas pressure regulator
    • Requires 10.3-34.5 kPa (1.5-5 psi) gas
    • Natural gas carburetor
  • Ignition System
    • ADEM A4 ignition
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filter
    • Oil pan, full sump
    • Oil filler and dipstick
  • Protection System
    • The following parameters include alarm and shutdown

Optional Equipment

  • Charging Alternator
    • 24V, 35A alternator
    • 24V, 35A CSA alternator*
  • Cooling System
    • Radiators
    • Jacket water pump inlet adapter
  • Exhaust System
    • Exhaust flex fitting — ANSI flange
    • Exhaust elbow
    • Exhaust flange — ANSI flange
  • Guards
    • Fan guard
    • Damper guard
  • Ignition System
    • CSA certified electronics and ignition
  • Instrumentation
    • Operator interface panel
    • Operator interface panel enclosure
    • 15', 20' and 50' interconnect harness
  • Starting System
    • Air pressure regulator
    • Air start silencer
    • Vane starter
    • Electric starter
    • Turbine starter