CG137-8 Gas Compression Engine

CG137-8 Gas Compression Engine

Engine Specifications

Minimum Rating
400.0bhp
Maximum Rating
400.0bhp
Emissions
NSPS Site Compliant Capable
Displacement
1099.0in3
Compression Ratio
10.25:1
Aspiration
Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6.0in
Bore
5.4in
Weight - Dry
6250lb
Ignition, Protection
Electronic ADEM A4
Air/Fuel Ratio Control
Electronic ADEM A4
Minimum Rating
400BHP
Maximum Rating
400BHP
Emissions
NSPS Site Compliant Capable
Displacement
1099in³
Compression Ratio
10.25:1
Aspiration
Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6in
Bore
5.4in

Capacity for Liquids

Cooling System
14.5gal
Lube Oil System (refill)
39.0gal
Cooling System
14.5gal (US)
Lube Oil System - Refill
39gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
    • Optional air inlet adapter and rain cap — recommended for weather protection
  • Control System
    • ADEM A4
    • Class 1, Division 2, Group C & D and Zone 2
  • Cooling System
    • Jacket water thermostats and housing — full open temperature 98°C (208°F)
    • Jacket water pump — gear driven, centrifugal, non-self-priming
    • Aftercooler water pump — gear driven, centrifugal, non-self-priming
    • Aftercooler core — for treated water and sea air atmosphere
  • Exhaust System
    • Exhaust manifolds — watercooled
    • Exhaust elbow — dry 203 mm (8 in)
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 14 or 18
    • Flywheel housing, SAE No. 0
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil filler in valve cover, dipstick — RH
  • Protection System
    • ADEM A4 protection
    • The following include alarm and shutdown:
    • The following is display only
  • General
    • Paint, Caterpillar yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes
    • Cylinder block inspection covers

Optional Equipment

  • Charging Alternator
    • 24V, 60A CSA alternator
  • Exhaust System
    • Exhaust flex fitting
    • Exhaust elbow
    • Exhaust flange — ANSI
  • Instrumentation
    • Operator interface panel
    • Operator interface panel enclosure
    • 15', 20', 50' interconnect harness
  • Starting System
    • Air pressure regulator
    • Air start silencer
    • Vane starter
    • Electric starter
    • Turbine starter
  • Fuel System
    • Fuel filter
  • Air Inlet System
    • Precleaner
    • Rain cap