XQ425

XQ425

The Cat® XQ425 provides world class performance and enhanced usability. This model is powered by the fuel-efficient Cat C13 ACERT® engine equipped with the Cat NOx Reduction System. Equipped with the new EMCP 4.4 control panel, the XQ425 features a user-friendly interface and automatic generator set paralleling. A principle advantage of the control system offers simpler and faster voltage changes. Providing greater flexibility when moving between multiple job sites with differing frequency and voltage needs, the auto-configuration capability eliminates the time required when reprogramming units and potential errors. Additional features include lower noise levels and improved part load fuel consumption.

Generator

Rating
375 ekW (470 kVA) Standby
Frame Size
SR4B – 450
Pitch
0.750
Number of bearings
Single bearing, close coupled
Insulation
Class H
Temperature rise
105 C
Enclosure
Drip proof IP23
Prime Rating
340 kW
Voltage
120 - 480V
Frequency
50/60 Hz
Overspeed capability – % of rated
125% of rated
Voltage regulator
3 phase sensing with Volts-per-Hertz
Voltage regulation
Less than ± 1⁄2% voltage gain Adjustable to compensate for engine speed droop and line loss
Wave form deviation
3%
Telephone Influence Factor (TIF)
Less than 50
Harmonic Distortion (THD)
Less than 5%
Rating
340 ekW (425 kVA)
Rating Standby
375 ekW (469 kVA)
IPP Rated 60Hz
74 dB(A)
Rating Prime
340 ekW (425 kVA)
Rating Standby
375 ekW (469 kVA)

Engine

Engine
C13 ACERT
Fuel
Diesel
Cat® Diesel Engines
C13 ATAAC, I-6 4-stroke water cooled diesel
Bore
5.10in
Stroke
6.20in
Displacement
763in3
Compression ratio
17.0:1
Engine RPM
1500-1800
Aspiration
TA
Aftercooler type
ATAAC
Turbocharger
Single
Fuel system
MEUIC
Governor type
ADEM™ A4
Fuel
Requires ULSD

Dimensions

Width - Without Trailer
104in
Width - With Trailer
102in
Height - Without Trailer
60in
Height - With Trailer
126.1in
Length - Without Trailer
208.7in
Length - With Trailer
283.7in
Weight - Without Trailer, With Lube Oil and Coolant
14700lb
Weight - With Trailer, Lube, Oil and Coolant
17930lb
Weight
14700lb

Fuel Consumption Prime

100% Load 60Hz Prime
23.1gal/hr
75% Load 60Hz Prime
17.7gal/hr
50% Load 60Hz Prime
12.7gal/hr
100% Load 60Hz Prime
23.1gal/hr
75% Load 60Hz Prime
17.7gal/hr
50% Load 60Hz Prime
12.7gal/hr

Fuel Consumption Standby

100% Load 60Hz Standby
25.1gal/hr
75% Load 60Hz Standby
19.2gal/hr
50% Load 60Hz Standby
13.6gal/hr
100% Load 60Hz Standby
25.1gal/hr
75% Load 60Hz Standby
19.2gal/hr
50% Load 60Hz Standby
13.6gal/hr

Noise rating (with enclosure)

Sound Power @ 7 meters (23 feet) @ All Ratings
74 dB(A)

Standard Equipment

  • Cat C13 Diesel Engine
    • Heavy-duty.
      Turbocharged.
      After treatment.
  • Generator
    • SR4B - 450 frame.
  • Control Panel
    • Digital EMCP4.2 set mounted controller.
  • Cat Connect Remote Monitoring
    • Provides package monitoring and management.
  • Cooling System
    • Package mounted radiator with vertical air discharge.
      Filled from factory.
  • Charging / Starting System
    • 12V heavy duty starting motor and charging alternator c/w battery isolator.
  • Fuel System
    • 24hr dual wall fuel tank with 3 way directional valve for external supply.
  • Air Filter
    • Cyclonic/paper with dust cup and service indicator.
  • Distribution
    • Single, robust enclosure for controls and distribution c/w 4 pole circuit breaker and safety cut off.
  • Structure
    • Heavy Duty steel base frame with integral fuel tank.
      Lifting frame and 4 point lift.
      Base frame is wider than enclosure to protect generator set during transportation.
  • Enclosure
    • Sound attenuating, galvanised steel enclosure with exceptional noise reduction performance.
  • Exhaust
    • Integrated spark arresting silencer.
  • Lube Oil
    • On engine primary and secondary oil filters. Filled from factory.
  • General
    • Factory tested and inspected.