3608 Generator Set (Medium Speed)

3608 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability,reliability, and cost-effectiveness.

Download Product Documents

Engine Specifications

Bore
11in
Displacement
1127in3
Stroke
11.8in
Aspiration
TA
Fuel System
Direct unit injection
Engine Model
3608 I-8,4-Stroke Water-Cooled Diesel
Total Displacement
9064in³
Compression Ratio
13:1
Governor Type
Generator Set Monitoring System (GMS)
Aspiration
TA
Fuel System
Direct unit injection
Bore
11in
Displacement
1127in³
Stroke
11.8in

Generator Set Specifications

Minimum Rating
2363 kVA
Maximum Rating
3575 kVA
Frequency
50 Hz
Speed
750 & 1000 RPM

Generator Set Configurations

Emissions/Fuel Strategy
Low Fuel Consumption

Standard Equipment

  • Air Inlet System
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air inlet shutoff
    • Breather, crankcase, top-mounted
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
  • Cooling System
    • Engine coolant water drains
    • Water temperature regulator
    • Jacket water thermostats
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
    • Includes adapter, Flexible exhaust fitting
  • Fuel System
    • Simplex or Duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Centrifugal oil filters with single shutoff
    • Service side engine mounted on cylinder block inspection covers
    • Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
    • Oil filler and dipstick
    • Oil pressure regulating valve
    • Crankcase explosion relief valves
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • Vane type air starter
    • One motor, engine mounted at rear, on left side
    • Air silencer
    • Line group for single point custom connection
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel, Oil, Jacket water, Aftercooler / Oil cooler water

Optional Equipment

  • Air Inlet System
    • Soot filter
    • Air cleaner louver assembly
    • Vertical support bracket
    • Heavy duty air cleaner
    • Air inlet adapter
    • Boost control valve
  • Cooling System
    • Heating aids
    • Cooling system aids
    • Auxiliary water pump
    • Expansion tank
  • Exhaust System
    • Flexible exhaust fittings
    • Weld flange and related hardware
  • Fuel System
    • Fuel priming pump
    • Duplex primary fuel strainer
    • Fuel system connections
  • Generator System
    • 3 Phase, six Leads, WYE
    • Class F insulation
    • Busbar connections
    • Winding temperature detectors
    • Anti-condensation space heaters
  • Governor System
    • Electronic / actuators
    • Digital programmers
    • Battery backup / Power supply
    • 2301 A load share
    • 723 Plus
    • EGB actuator
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Isolator
    • Spring type vibration isolator
    • Vertically restrained
    • Non-vertically restrained
  • Starting / Charging System
    • Pressure reducing valve
    • Compressed air flex hose
  • General:
    • Custom paint colors