TL642D Telehandler

TL642D Telehandler

Engine

Engine Model
Cat® C3.4B
Note
Meets U.S. EPA Tier 4 Final emission standards.
Gross Power - Basic
100HP
Engine Model
Cat® C3.4B
Note
Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight
22002lb
Operating Weight
22002lb

Operating Specifications

Maximum Forward Reach
30ft
Top Travel Speed
21mph
Capacity at Max Reach
700lb
Turning Radius over Tires
12ft
Drawbar Pull (Loaded)
19783lbf
Rated Load Capacity
6500lb
Maximum Lift Height
42ft
Capacity at Maximum Height
6500lb
Capacity at Maximum Reach
700lb
Maximum Forward Reach
30ft
Top Travel Speed
21mile/h
Drawbar Pull - Loaded
19783
Frame Leveling
10°
Turning Radius - Over Tires
12ft

Tires

Standard
370/75-28 Air Duraforce
Optional
370/75-28 Foam Duraforce
Optional
13.00 × 24-16 PR Air
Optional
13.00 × 24-12 PR Foam Filled
Optional
13.00 × 24 Solid
Standard
370/75-28 Air Duraforce
Optional (1)
370/75-28 Foam Duraforce
Optional (2)
13.00 × 24-16 PR Air
Optional (3)
13.00 × 24-12 PR Foam Filled
Optional (4)
13.00 × 24 Solid

Service Refill Capacities

Fuel Tank
38.3gal
Hydraulic System
40gal
Diesel Exhaust Fluid (DEF) Tank
5.7gal
Fuel Tank
38.3gal (US)
Diesel Exhaust Fluid (DEF) Tank
5.7gal (US)
Hydraulic System
40gal (US)

Brakes

Service Brakes
Inboard wet disc brakes on front and rear axles
Parking Brakes
Wet disc, spring applied hydraulic release on front axle
Parking Brakes
Wet disc, spring applied hydraulic release on front axle
Service Brakes
Inboard wet disc brakes on front and rear axles

Axles

Type
Trunnion mounted planetary 55 degree steer axles.
Type (2)
High bias limited slip differential on front axle.
Type (1)
Trunnion mounted planetary 55 degree steer axles.

Hydraulic System

Gear Pump
Single-section
System Operating Pressure
3770psi
Auxiliary Hydraulic Pressure
3481psi
Auxiliary Hydraulic Flow
18gal/min
Note
Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Auxiliary Hydraulic Flow
18gal/min
Auxiliary Hydraulic Pressure
3481psi
Note
Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure
3770psi

Boom Performance

Boom Up
15s
Boom Down
10.3s
Tele In
9.5s
Tele Out
16.3s

Transmission Speeds

Forward
4 speed
Reverse
3 speed
Forward
4 speed
Reverse
3 speed

Work Tools

Hydraulic IT Coupler
Includes Auxiliary Electrics
Pallet Forks – Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks – Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks – Option 3
[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Lumber Forks – Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks – Option 2
[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages: Standard Tilt
50in
Carriages: Wide Tilt
72in
Carriages: Side Shift
48in
Carriages: Standard Rotate
50in
Carriages: Wide Rotate
72in
Carriages: Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages: Dual Fork Positioning
50in
Carriages - Dual Fork Positioning
50in
Carriages - Side Shift
48in
Carriages - Standard Rotate
50in
Carriages - Standard Tilt
50in
Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate
72in
Carriages - Wide Tilt
72in
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler
Includes Auxiliary Electrics
Lumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2
[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3
[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)