962M Wheel Loader

962M Wheel Loader

The new 962M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 3 and EU Stage IIIA equivalent emission standards.

Download Product Documents

Engine

Net Power - ISO 9249
248hp
Engine Model
Cat C7.1 ACERT
Maximum Power @ 2,000 rpm – SAE J1995
263hp
Maximum Power @ 2,000 rpm – ISO 14396
261hp
Displacement
428in3
Maximum Power @ 2,000 rpm – ISO 14396 (metric)
265hp
Maximum Net Power @ 2,000 rpm – SAE J1349
248hp
Maximum Net Power @ 2,000 rpm – ISO 9249
248hp
Maximum Net Power @ 2,000 rpm – ISO 9249 (metric)
252hp
Peak Gross Torque (1,400 rpm) – SAE J1995
777lbf-ft
Peak Gross Torque (1,400 rpm) – ISO 14396
774lbf-ft
Maximum Net Torque (1,400 rpm)
726lbf-ft

Weights

Operating Weight
44593lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Transmission

Forward 1
4.3mph
Forward 2
7.5mph
Forward 3
12.0mph
Forward 4
16.0mph
Reverse 1
4.3mph
Reverse 2
7.5mph
Reverse 3
16.0mph
Forward 5
24.5mph
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Service Refill Capacities

Cooling System
15.6gal
Crankcase
5.8gal
Transmission
11.4gal
Differentials and Final Drives – Front
11.4gal
Differentials and Final Drives – Rear
11.4gal
Hydraulic Tank
33.0gal
Fuel Tank
72.6gal

Operating Specifications

Breakout Force
42489lbf
Static Tipping Load – Full 40° Turn – No Tire Deflection
27494lb
Static Tipping Load – Full 40° Turn – with Tire Deflection
25814lb
Note
For a machine configuration as defined under “Weight.”
Note
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Hydraulic System

Implement Pump Type
Variable Axial Piston
Hydraulic Cycle Time – Total
9.6Seconds
Implement System: Maximum Operating Pressure
4250psi
Implement System: Maximum Pump Output (2,150 rpm)
76gal/min

Sound

With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Dimensions – Standard Lift

Height to Top of Hood
8.83ft
Height to Top of Exhaust Pipe
11.17ft
Height to Top of ROPS
11.33ft
Ground Clearance
1.17ft
Center Line of Rear Axle to Edge of Counterweight
7.08ft
Center Line of Rear Axle to Hitch
5.50ft
Wheelbase
11.00ft
Overall Length (without bucket)
23.75ft
Hinge Pin Height at Carry Height
2.17ft
Hinge Pin Height at Maximum Lift
13.92ft
Lift Arm Clearance at Maximum Lift
11.33ft
Rack Back at Maximum Lift
55 degrees
Rack Back at Carry Height
51 degrees
Rack Back at Ground
39 degrees
Maximum Width over Tires (loaded)
9.33ft
Tread Width
7.00ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Dimensions – High Lift

Height to Top of Hood
8.83ft
Height to Top of Exhaust Pipe
11.17ft
Height to Top of ROPS
11.25ft
Ground Clearance
1.17ft
Center Line of Rear Axle to Edge of Counterweight
7.17ft
Center Line of Rear Axle to Hitch
5.50ft
Wheelbase
11.00ft
Overall Length (without bucket)
25.00ft
Hinge Pin Height at Carry Height
2.58ft
Hinge Pin Height at Maximum Lift
14.83ft
Lift Arm Clearance at Maximum Lift
11.83ft
Rack Back at Maximum Lift
56 degrees
Rack Back at Carry Height
48 degrees
Rack Back at Ground
42 degrees
Maximum Width over Tires (loaded)
9.33ft
Tread Width
7.00ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.