992K Wheel Loader

992K Wheel Loader

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that’s both safe to operate, productive and durable. With the introduction of the K Series, we’ve enhanced the operator’s experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you’ll find everything that’s important to your business in the 992K; safety, productivity, cost control and comfort for your people.

Download Product Brochure

Engine

Net Power
814hp
Engine Model
Cat® C32 ACERT™
Emissions (U.S. EPA Tier 4 Final): Net Power – SAE J1349
814hp
Bore
5.7in
Stroke
6.4in
Displacement
1963.5in3
Emissions (U.S. EPA Tier 4 Final): Rated Speed
1750rpm
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
900HP
Emissions (U.S. EPA Tier 4 Final): Gross Power – ISO 14396
884hp
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995
814HP
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995
4765r/min
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
907HP
Emissions (Tier 2 Equivalent): Net Power - SAE J1349
814HP
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396
884HP
Emissions (Tier 2 Equivalent): Rated Speed
1750r/min
Emissions (Tier 2 Equivalent): Net Power - SAE J1995
814HP
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995
4796r/min
Torque Rise
30%
Note (Tier 4 Final) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 2 Equivalent) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Net Power
814HP
Engine Model
Cat® C32 ACERT™
Bore
5.7in
Stroke
6.4in
Displacement
1963.5in³
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349
814HP
Emissions (U.S. EPA Tier 4 Final): Rated Speed
1750r/min
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396
884HP
Torque Rise
30%

Operating Specifications

Operating Weight
220089lb
Rated Payload – Standard (face material)
24tons
Rated Payload – High Lift (face material)
21tons
Bucket Capacity Range
10.7-12.3 m3 (14-16 yd3)
Operating Weight – Standard
220089lb
Operating Weight – High Lift
221847lb
Operating Weight
220089lb
Rated Payload - High Lift (Face Material)
21t
Rated Payload - Standard (Face Material)
24t
Operating Weight - High Lift
221847lb
Operating Weight - Standard
220089lb

Buckets

Bucket Capacities
10.7-12.3 m3 (14-16 yd3)
Bucket Capacities
10.7-12.3 m3 (14-16 yd3)

Transmission

Transmission Type
Cat Planetary Power Shift
Forward 1
4.3mph
Forward 2
7.4mph
Forward 3
12.6mph
Reverse 1
4.7mph
Reverse 2
8.1mph
Reverse 3
13.8mph
Direct Drive – Forward 2
8.0mph
Direct Drive – Reverse 1
4.9mph
Direct Drive – Reverse 2
8.8mph
Direct Drive - Forward 1
Disabled
Direct Drive - Forward 3
14.2mile/h
Direct Drive - Reverse 3
15.4mile/h
Transmission Type
Cat Planetary Power Shift
Forward - 1
4.3mile/h
Forward - 2
7.4mile/h
Forward - 3
12.6mile/h
Reverse - 1
4.7mile/h
Reverse - 2
8.1mile/h
Reverse - 3
13.8mile/h
Direct Drive - Forward 2
8mile/h
Direct Drive - Reverse 1
4.9mile/h
Direct Drive - Reverse 2
8.8mile/h

Axles

Front
Fixed
Rear
Oscillating
Oscillation Angle
10° ±, 8° ± with Stops
Front
Fixed
Rear
Oscillating
Oscillation Angle
10° ±, 8° ± with Stops

Hydraulic System – Steering

Steering System – Circuit
Pilot, Load Sensing
Steering System – Pump
Piston, Variable Displacement
Maximum Flow @ 1,350 rpm
95gal/min
Steering Cut Off Pressure
4500psi
Steering Cycle Time (high idle)
4.4seconds

Hydraulic Cycle Time

Raise
9.4seconds
Dump
1.8seconds
Total Hydraulic Cycle Time
19.3seconds

Hydraulic System – Lift/Tilt

Maximum Flow at 1,850 rpm
254gal/min
Lift Cylinder – Bore
11in
Lift Cylinder – Stroke
45.2in
Tilt Cylinder – Bore
10.5in

Sound Performance

Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level – Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level – Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level - Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s

Brakes

Brakes
Meet ISO 3450:2011
Brakes
Meet ISO 3450:2011

Hydraulic Cycle Times

Rack Back
4.4s
Lower Float Down
3.7s
Dump
1.8s
Raise
9.4s
Total Hydraulic Cycle Time
19.3s

Hydraulic System - Steering

Steering Cycle Times - Low Idle
6.4s
Steering Cycle Times - High Idle
4.4s
Maximum Flow at 1,350 rpm
95gal/min
Steering Cut Off Pressure
4500psi
Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston, Variable Displacement
Total Steering Angle
86°

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit
Positive Flow Control
Lift/Tilt System - Pump
Variable Displacement Piston
Relief Valve Setting - Lift/Tilt
4500psi
Tilt Cylinder - Stroke
80.9in
Lift Cylinder - Bore
11in
Lift Cylinder - Stroke
45.2in
Maximum Flow at 1,850 rpm
254gal/min
Tilt Cylinder - Bore
10.5in

Dimensions - Standard Lift - Approximate

Ground to Top of ROPS
18.63ft
Ground to Top of Exhaust Stacks
17.22ft
Ground to Top of Hood
13.26ft
Ground to Bumper Clearance
3.86ft
Rear Axle - Centerline to Bumper
13.76ft
Wheel Base
19.32ft
Maximum Overall Length
52ft
Ground to Lower Hitch Clearance
2.24ft
Ground to Center of Axles
4.44ft
Rack Back Angle - Ground Level
43.4 degrees
Rack Back Angle - Carry
52.7 degrees
B-Pin Height - Maximum Lift
22.73ft
Maximum Overall Height - Bucket Raised
30.5ft
Dump Angle at Maximum Lift
50 degrees
Reach - Maximum Lift
6.95ft
Clearance at 50° Dump (Tooth Tip)
14.7ft
Rack Back Angle - Maximum Lift
65 degrees
Tread Width
10.83ft

Dimensions – Standard Lift (Approximate)

Wheel Base
19.32ft
Rack Back Angle at Ground Level
43.4 degrees
Dump Angle at Maximum Lift
50 degrees

Dimensions - High Lift - Approximate

Ground to Top of ROPS
18.63ft
Ground to Top of Exhaust Stacks
17.22ft
Ground to Top of Hood
13.26ft
Ground to Bumper Clearance
3.86ft
Rear Axle - Centerline to Bumper
13.76ft
Wheel Base
19.32ft
Maximum Overall Length
52.81ft
Ground to Lower Hitch Clearance
2.24ft
Ground to Center of Axles
4.44ft
Rack Back Angle - Ground Level
42.8 degrees
Rack Back Angle - Carry
52.5 degrees
B-Pin Height - Maximum Lift
24.58ft
Maximum Overall Height - Bucket Raised
33.08ft
Dump Angle at Maximum Lift
50 degrees
Reach - Maximum Lift
6.86ft
Clearance at 45° Dump (Tooth Tip)
15.01ft
Rack Back Angle - Maximum Lift
65 degrees
Tread Width
10.83ft

Dimensions – High Lift (Approximate)

Wheel Base
19.32ft
Rack Back Angle at Ground Level
42.8 degrees
Dump Angle at Maximum Lift
50 degrees

Service Refill Capacities

Fuel Tank
413gal
Cooling Systems
77gal (US)
Engine Crankcase
32gal
Transmission
45gal
Differentials and Final Drives – Front
95gal
Differentials and Final Drives – Rear
91gal
Hydraulic System - Implement
86gal (US)
Hydraulic System - Steering
42gal (US)
AC Refrigerant
6lb
AC Oil
0.071gal (US)
Fuel Tank
413gal (US)
Transmission
45gal (US)
Differential - Final Drives - Front
95gal (US)
Differential - Final Drives - Rear
91gal (US)
Engine Crankcase
32gal (US)

Standard Equipment

  • Power Train
    • Air-to-Air After Cooler (ATAAC)
    • Axle oil coolers (front and rear)
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
    • Case drain filters
    • Demand fan
    • Driveline, electro-hydraulic parking brake
    • Electric fuel priming pump
    • Engine Cat C32 ACERT
    • Ground level engine shutdown
    • Ground level fast fill fuel
    • Ground level transmission lockout
    • Ground level starter lockout
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Starting aid, ether, automatic
    • Throttle lock
    • Transmission, 533 mm (21 in) planetary powershift with 3F/3R with electronic control
  • Electrical
    • Alarm, back-up
    • Alternator, 150-amp
    • Batteries, low maintenance
    • Converter, 10-amp, 24V to 12V
    • Deutsch and amp seal terminal connectors
    • Ground level electrical disconnect
    • Ground level starting receptacle for emergency start
    • Light, warning strobe
    • Lights, front and rear, access stairway, turn signals/hazard lights
    • Starter, electric (heavy duty)
    • Starting and charging system, 24V, ECM diagnostic connector
  • Operator Environment
    • Air conditioner and heater with automatic temperature control
    • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use
    • Camera, rear vision
    • Cigar lighter
    • Coat hook
    • Electro-hydraulic tilt and lift controls
    • Horn, electric
    • Implement and steering lockouts
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat Comfort with air suspension
    • Seat belt, 2-point, 76 mm (3 in), minder
    • Steering and transmission lock lever
    • STIC control system
    • Tie-offs on ROPS
    • Tinted glass
    • Trainer seat with 76 mm (3 in) wide lap belt
    • Transmission gear indicator
    • VIMS (Vital Info Management System): – 3G with graphical information display – Cycle timer – External data port – Integral Cat Production Measurement (Cat PM)
    • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
  • Safety And Security
    • Fire suppression ready
  • Other Standard Equipment
    • Automatic lubrication system
    • Bumper service center
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Economy mode
    • Emergency platform egress
    • Fenders, steel (front and rear)
    • Fuel, fast fill
    • Grouped hydraulic pressure ports
    • Guards, power train and crankcase
    • Hitch, drawbar with pin
    • Hoses, Cat XT and XT-ES
    • Hydraulic oil cooler
    • Impeller clutch
    • Implement and steering ecology drains
    • Mufflers, under hood
    • Oil sampling valves
    • Piston pump case drain filters
    • Service center with ground level electrical and fluids service center
    • Sight gauges: – Steering oil level – Implement oil level – Transmission oil level – Coolant level
    • Stairway, left and right rear access
    • Starter lockout, bumper
    • Steering, load sensing
    • Tie-offs on ROPS
    • Toe kicks
    • Transmission lockout, bumper
    • Vandalism protection caplocks
    • Venturi stacks (2)

Optional Equipment

  • Operator Environment
    • AM/FM/CD/MP3 radio
    • AM/FM/CD/MP3 radio with Bluetooth and satellite ready
    • Sun screen
  • Starting Aids
    • Engine coolant 120V heater
    • Engine coolant 240V heater
  • Machine Control And Guidance
    • Cat Terrain ready
  • Miscellaneous Attachments
    • Arctic antifreeze for protection to –50° C (–58° F)
    • Diagnostic lines
    • Roading fenders
    • Wheel chocks