910M Compact Wheel Loader

Engine

Maximum Gross Power: Maximum Engine Speed
2350RPM
Net Power
97hp
Engine Model
Cat C4.4 ACERT™
Maximum Gross Power: ISO 14396 (DIN)
101hp
Rated Net Power: Rated Engine Speed
2200RPM
Maximum Gross Power - ISO 14396
100HP
Maximum Gross Power - SAE J1995
102HP
Rated Net Power - SAE J1349
96HP
Rated Net Power - ISO 9249
97HP
Rated Net Power - ISO 9249 (DIN)
98HP
Maximum Gross Torque - SAE J1995
336ft·lbf
Maximum Gross Torque: ISO 14396
332lbf-ft
Maximum Net Torque: SAE J1349
325lbf-ft
Maximum Net Torque - ISO 9249
329ft·lbf
Displacement
268in3
Bore
4.13in
Stroke
5.00in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power
100hp
Net Power
97HP
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396 (DIN)
101HP
Maximum Gross Power - Maximum Engine Speed
2350r/min
Rated Net Power - Rated Engine Speed
2200r/min
Maximum Gross Power
100HP
Bore
4.13in
Displacement
268in³
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
332ft·lbf
Maximum Net Torque - SAE J1349
325ft·lbf
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Stroke
5in

Weights

Operating Weight
17893lb
Operating Weight
17893lb

Operating Specifications

Rated Bucket Capacity
2.5yd3
Rated Bucket Capacity
2.5yd³

Service Refill Capacities

Cooling System
5.7gal
Fuel Tank
40.7gal
Hydraulic System (including tank)
25.9gal
Engine Crankcase
2.3gal
Axles - Front Center Differential
2gal (US)
Axles - Rear Center Differential
2gal (US)
Hydraulic Tank
14.5gal
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
0.9gal
Cooling System
5.7gal (US)
Fuel Tank
40.7gal (US)
Engine Crankcase
2.3gal (US)
Hydraulic System - Including Tank
25.9gal (US)
Hydraulic Tank
14.5gal (US)
Transmission
0.9gal (US)

Buckets

Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)

Steering

Steering Articulation Angle - Each Direction
40°
Maximum Flow - Steering Pump
17gal/min
Maximum Working Pressure – Steering Pump
2683psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75turns
Maximum Working Pressure - Steering Pump
2683psi

Loader Hydraulic System

Maximum Flow – Implement Pump
32gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24gal/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24gal/min
Maximum Working Pressure – Implement Pump
3408psi
Relief Pressure - Tilt Cylinder
4931psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2s
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4s
Hydraulic Cycle Time - Rackback
2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7s
Hydraulic Cycle Time - Total Cycle Time
12.5s
Maximum Flow - Implement Pump
32gal/min
Maximum Working Pressure - Implement Pump
3408psi

Transmission

Forward and Reverse - Low Range, Speed Range 1*
6.3mile/h
Forward and Reverse - Low Range, Speed Range 2*
12.5mile/h
Forward and Reverse - High Range
25mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Tires

Standard Size
15.5-25 12PR
Other Choices Include
15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)