M 32 C Marine Generator Set

M 32 C Marine Generator Set

The M 32 C was introduced in 1994 in 6, 8 and 9 cylinder versions and is outstandingly suitable as a generator prime mover for electric power on ships. The robust design and moderate speed permits unlimited, continuous operation with heavy fuel oil. In-line engines – completed with generators – are mounted on a common base frame. The engine and electrics are tested prior to delivery. This ensures trouble-free installation and commissioning.

Download Product Documents

Generator Set Specifications

Minimum Rating
2762 kWe (3456 kVA)
Maximum Rating
4316 kWe (5400 kVA)

Generator Set Configurations

Emissions/Fuel Strategy
EPA Tier 2 & IMO II

Engine Specifications

Configuration
6,8,9 Cylinder
Bore
12.6in
Stroke
18.9in
Swept Volume
2361.62in3

Generator Set Dimensions and Weights (dependent on Generator Type)

Weight
73.0 t - 98.0 t (160937 lbs - 216053 lbs)
Length
9302 mm - 11419 mm (366.2 in - 449.6 in)
Width
2600 mm - 2639 mm ( 102.4 in - 103.9 in)
Height
4801 mm - 4869 mm (189.0 in - 191,7 in)

Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Load sharing unit (for multiple engine plant only)
    • Protection system
    • Serial link interface (MODbus / canbus)
    • Speed governor
  • Cooling System
    • Electric cooling water preheater
    • HT cooling water pump (engine driven)
    • 2-stage charge air cooler
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at counter-flywheel side
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (attached / for MDO/MGO only)
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Engine with dry sump
    • Lube oil cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil self-cleaning filter
    • Oil sump in base frame
    • Pre-lubricating oil pump (electric driven / fitted on base frame)
    • Pressure regulating valve
  • Mounting System
    • Flexible pipe connections
    • High flexible coupling
    • Resilient mounting
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Engine, flexible coupling and generator mounted on a common base frame
    • Flywheel cover
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Air injection control (for better load request)
    • Electronic speed governor
    • Engine alarm system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • CW piping for generator cooling on base frame
    • CW piping for lube oil cooler on base frame
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil cooler fitted on base frame
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Temperature control valve
  • Mounting System
    • Double resilient mounting (engine and base frame)
    • Engine resiliently mounted on base frame, base frame mounted rigidly
    • Flexible pipe connections
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Engine PTO coupling
    • Generator customer supply
    • PTO shaft on counter-flywheel side