3512B Marine Generator Set

3512B Marine Generator Set

Generator Set Specifications

Minimum Rating
880 eKW (1000 kVA)
Maximum Rating
1360 eKW (1800 kVA)
Frequency
50 hz or 60 hz
Speed
1000 rpm, 1200 rpm, 1500 rpm, 1800 rpm

Generator Set Configurations

Emissions
IMO I, IMO II (1200 eKW @ 50 hz only)

Engine Specifications

Configuration
Vee 12, 4-Stroke-Cycle Diesel
Aspiration
TTA
Bore
6.7in
Stroke
7.5in
Displacement
3158.0in3

Generator Set Dimensions

Weight
10034 kg (22120 lb) to 11186 kg (24661 lb)
Length
4536 mm (178.6 in) to 4804 mm (189.1 in)
Width
1703 mm (67.1 in) to 2144 mm (84.4 in)
Height
2053 mm (80.8 in) to 2072 mm (81.6 in)

Standard Equipment

  • Air Inlet System
    • Separate Circuit aftercooler core, corrosion resistant coated (air side) Air cleaner, regular duty Dual Turbochargers, 152 mm (6 in) OD straight connection
  • Control System
    • Caterpillar A-III Electronic Engine Control, with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
  • Cooling System
    • Oil cooler Thermostats and housing, full open temperature 92 C (198 F) Jacket water pump, gear driven, centrifugal Auxiliary fresh water pump Expansion tank Auxiliary sea water pump, centrifugal, non-self-priming
  • Exhaust System
    • Dry gas tight exhaust manifolds with heat shields Dual Turbochargers with watercooled bearings and heat shields Exhaust outlet, vertical, 305 mm (12 in) round flanged outlet on engines @ 1500 or 1800 rpm Exhaust outlet, vertical, 203 mm (8 in) round flanged outlet on engines @ 1200 or 1000 rpm
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
  • Fuel System
    • Fuel filter, RH, with service indicators
    • Fuel transfer pump
    • Electronically Controlled Unit Injectors
  • Instrumentation
    • Overspeed shutdown notification light
    • Emergency stop notification light
    • Prelube override
    • Shutdown override
    • Graphical Unit (Marine Power Display) for analog or digital display of:
    • Engine oil pressure, Engine water temperature, Fuel pressure System, DC voltage, Air inlet restriction, RH & LH exhaust temperature, Fuel filter differential, Oil filter differential, Service meter, Engine speed, Instantaneous Fuel Consumption, Total Fuel Consumed, Engine Control Switch (4 position), Alarms are prioritized, Overspeed shutdown notification light, Emergency stop notification light, Prelube override, Shutdown override
  • Lube System
    • Crankcase breather, Top mounted Oil filter, RH Oil filler and dipstick, RH Deep sump oil pan Oil pump, gear type
  • Mounting System
    • Rails, engine mounting, engine length, industrial type, 254 mm (10 in), C-channel
  • Power Take-offs
    • Accessory drive Lower RH, Lower LH Front housing, Two-sided
  • Protection System
    • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
    • Emergency Stop Push Button (located In Electronic Instrument Panel) Safety Shutoff Protection:
      • Oil pressure and water temperature (non-redundant, uses OP and WT sensors). Overspeed (redundant and independent of engine governing system)
  • General
    • Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
    • NOTE: 1. Engines for heat exchanger cooling do NOT include heat exchanger. 2. When used with competitive generator, a TVA is recommended. An alternative vibration damper may be required. 3. Engine is wired for auto start stop.

Optional Equipment

  • Air Inlet System
    • Air Cleaner Removal
    • Remote Air Inlet Adapters
  • Charging System
    • Battery Chargers
    • Charging Alternators
  • Control System
    • Load Sharing module
    • Local speed throttle control
  • Cooling System
    • Water level switch gauge
    • Coolant level sensors
    • Connections
      • INLET/OUTLET CONNECTION
      • KEEL COOLING CONNECTIONS
      • SINGLE/COMBINED CIRCUIT
      • EMERGENCY WATER CONNECTIONS
    • Keel Cooling Conversions
    • Radiator cooling conversion
    • Heat exchangers
    • Auxiliary water pumps
    • Sea water pump removal
    • Air separator
  • Exhaust System
    • Exhaust Outlet
      • HORIZONTAL EXHAUST
    • Flexible fittings
    • Elbows
    • Flanges
    • Flange and exhaust expanders
    • Mufflers
  • Fuel System
    • Fuel Cooler
    • Fuel priming pumps
    • Flexible fuel lines
    • Rigid Fuel Lines
    • Primary fuel filter
    • Fuel level switch
  • Generators And Generator Attachments
    • Low voltage connection
    • Generator conversion
    • Low voltage extension box
    • RFI Filter
    • Bearing temperature detectors
    • Manual voltage control
  • Instrumentation
    • PL1000E Communication Module
    • Customer Interface Box
    • Thermocouples
    • Remote panel display
    • Remote cylinder temperature display
  • Lube System
    • Oil Pan
    • Oil Pan Accessories
      • OIL PAN DRAIN VALVE
      • EMERGENCY LUBE OIL CONNECTIONS
      • OIL PAN DRAIN COVER
    • Sump pumps
    • Prelubrication Options
    • Lubricating oil
    • Centrifugal Oil Filter
  • Mounting System
    • Vibration isolators
    • Rails
  • Power Take-offs
    • Flywheel guard
    • Flexible coupling
    • Coupling hub
    • Front housing accessories
    • Front power take-offsFront power take-offs
    • Crankshaft pulleys
    • Damper guard removals
  • Protection System
    • Air inlet shutoffs
    • Switches and contactors
    • Explosion relief valve
    • Sensors
  • Spare Part Kits
    • Engine Parts Kits
  • Starting System
    • Starting motors or barring divice
    • Air starting motors options
    • Battery sets - 24 volt - Dry
    • Battery rack
    • Jacket water heater
  • General
    • Tool set
    • Caterpillar datalink wire
  • Svce Tools/ship Prot/factory Support
    • Commissioning