3508B Marine Generator Set

Generator Set Specifications

Minimum Rating
590 eKW (738 kVA)
Maximum Rating
910 eKW (1138 kVA)
Frequency
50 hz or 60 hz
Speed
1000 rpm, 1200 rpm, 1500 rpm, 1800 rpm

Generator Set Configurations

Emissions/Fuel Strategy
IMO I

Engine Specifications

Configuration
Vee 8, 4-Stroke-Cycle Diesel
Aspiration
TTA
Bore
6.7in
Stroke
7.5in
Displacement
2105.0in3
Governor Type
Electronic

Generator Set Dimensions

Width
67.1in
Weight
7684 kg (16940 lb) to 8909 kg (19640 lb)
Length
3704 mm (145.8 in) to 4256 mm (167.5 in)
Height
1806 mm (71.1 in) to 1826 mm (71.9 in)

Standard Equipment

  • Air Inlet System
    • Separate Circuit aftercooler core, corrosion resistant coated (air side) Air cleaner, regular duty Dual Turbochargers, 152 mm (6 in) OD straight connection
  • Control System
    • Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
  • Cooling System
    • Oil cooler Thermostats and housing, full open temperature 92 C (198 F) Jacket water pump, gear driven, centrifugal Auxiliary fresh water pump Expansion tank Auxiliary sea water pump, centrifugal, non-self-priming
  • Exhaust System
    • Dry gas tight exhaust manifolds with heat shields Dual Turbochargers with watercooled bearings and heat shields Exhaust outlet, vertical, 203 mm (8 in) round flanged outlet
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
  • Fuel System
    • Fuel filter, RH, with service indicators Fuel transfer pump Electronically Controlled Unit Injectors
  • Instrumentation
    • Overspeed shutdown notification light, Emergency stop notification light
    • Graphical Unit (marine Power Display) For Analog Or Digital Display Of:
      • Engine oil pressure, Engine water temperature, Fuel pressure, System DC voltage, Air inlet restriction, RH & LH exhaust temperature, Fuel filter differential, Oil filter differential, Service meter, Engine speed, Instantaneous Fuel Consumption, Total Fuel Consumed, Engine Control Switch (4 position), Alarms are priortized, Overspeed shutdown notification light, Emergency stop notification light, Prelube override, Shutdown override,
  • Lube System
    • Crankcase breather, Top mounted Oil filter, RH Oil filler and dipstick, RH 500 hours sump oil pan Oil pump, gear type
  • Mounting System
    • Rails, engine mounting, engine length, industrial type, 254 mm (10 in), C-channel
  • Power Take-offs
    • Accessory drive Lower RH, Lower LH Front housing, Two-sided
  • Protection System
    • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
    • Emergency Stop Push Button (located In Electronic Instrument Panel) Safety Shutoff Protection:
      • Oil pressure and water temperature (non-redundant, uses OP and WT sensors). Overspeed (redundant and independent of engine governing system)
  • General
    • Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
    • NOTE: 1. Engines for heat exchanger cooling do NOT include heat exchanger. 2. When used with competitive generator, a TVA is recommended. An alternative vibration damper may be required. 3. Engine is wired for auto start stop.

Optional Equipment

  • Air Inlet System
    • Remote Air Inlet Adapters
  • Charging System
    • Battery Chargers
    • Charging Alternators
  • Control System
    • Load Sharing module
    • Local speed throttle control
  • Cooling System
    • Water level switch gauge
    • Coolant level sensors
    • Connections
      • INLET/OUTLET CONNECTION
      • KEEL COOLING CONNECTIONS
      • SINGLE/COMBINED CIRCUIT
      • EMERGENCY WATER CONNECTIONS
    • Radiator cooling conversion
    • Keel Cooling Conversions
    • Heat exchangers
    • Auxiliary water pumps
    • Sea water pump removal
    • Air separator
  • Exhaust System
    • Horizontal Exhaust
    • Exhaust outlet
    • Flexible fittings
    • Elbows
    • Flanges
    • Flange and exhaust expanders
    • Mufflers
  • Fuel System
    • Fuel Cooler
    • Fuel priming pumps
    • Flexible fuel lines
    • Rigid Fuel Lines
    • Primary fuel filter
    • Fuel filters
    • Duplex fuel filters
    • Fuel level switch
  • Generators And Generator Attachments
    • 1500/1800 RPM, 1000/1200 RPM, low voltage conection, generator conversation, low voltage extension box, RFI filter, bearing temperature detectors (RTD), manual voltage control, air filter
  • Instrumentation
    • PL1000T Communication Module
    • PL1000E Communication Module
    • Customer Interface Box
    • Thermocouples
    • Remote panel display
    • Remote cylinder temperature display
  • Lube System
    • Oil Pan
    • Oil Pan Accessories
      • OIL PAN DRAIN VALVE
      • OIL PAN DRAIN COVER
      • EMERGENCY LUBE OIL CONNECTIONS
    • Sump pumps
    • Oil filters
    • Lubricating oil
    • Lube System
      • CENTRIFUGAL OIL FILTER
  • Mounting System
    • Rails
  • Power Take-offs
    • Flywheel Guard
    • Flexible Coupling
    • Coupling Hub
    • Upper Left Hand Front Location
    • Upper Left Hand Rear Location
    • Upper Right Hand Front Location
    • Upper Right Hand Rear Location
    • Lower Left Hand Front Location
    • Lower Left Hand Rear Location
    • Front Housing Accessory Drives
    • Upper LH Accessory Drive
    • Upper RH Accessory Drive
    • Front Power Take-offs
    • Crankshaft Pulleys
    • Damper Guard Removals
  • Protection System
    • Air inlet shutoffs
    • Switches and contactors
    • Explosion relief valve
    • OIL TEMP SENSOR
    • INTAKE MANIFOLD TEMP SENSOR
  • Starting System
    • Starting motors or barring divice
    • Air Starting Motors Options
      • AIR PRESSURE REGULATOR LH
    • Starting Aids
      • JACKET WATER HEATER
    • Battery sets - 24 volt - Dry
    • Battery rack
  • General
    • Tool set
    • Caterpillar datalink wire