Cat® C7 ACERT™ Industrial Power Unit

Cat® C7 ACERT™ Industrial Power Unit

The Cat® C7 ACERT™ Industrial Power Unit is offered in ratings ranging from 168-205 bkW (225-275 bhp) @ 1800-2200 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Download Product Brochure

Power Rating

Minimum Rating
225.0bhp
Maximum Rating
275.0bhp
Rated Speed
2200 rpm

Emission Standards

Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
110 mm (4.33 in)
Stroke
127 mm (5.0 in)
Displacement
7.2 L (442 in³)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
17:1
Rotation (from flywheel end)
Counterclockwise

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
2029.5 mm (79.9 in)
Width
974.8 mm (38.4 in)
Height
1986.3 mm (78.2 in)
Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
1250 kg (2756 lb)

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • HEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request