Cat® C32 ACERT™ Diesel Engine

Cat® C32 ACERT™ Diesel Engine

The Cat® C32 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 746-895 bkW (1000-1200 bhp) @ 1800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Applications powered by C32 ACERT engines include: Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

Download Product Brochure

Power Rating

Minimum Power
1000bhp
Maximum Power
1200bhp
Rated Speed
1800 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final

General

Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Bore
145 mm (5.71 in)
Stroke
162 mm (6.38 in)
Displacement
32.1 L (1958.9 in³)
Aspiration
Twin Turbocharged Aftercooled (TTA)
Compression Ratio
15.0:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
67.9 L (71.7 qt)
Lube System (refill)
68 L (71.9 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1874 mm (73.78 in)
Width
1600 mm (63 in)
Height
1370 mm (53.9 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
3004 kg (6625 lb)

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Rear sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • Power Take Off (PTO)
  • General
    • Paint: Caterpillar yellow, with optional colors available at request