Cat® C2.2 Industrial Power Unit

Cat® C2.2 Industrial Power Unit

The Cat® C2.2 Industrial Power Unit is offered in ratings ranging from 37.3 – 49.2 bkW (50.0 – 65.9 bhp) @ 2800-3000 rpm. These ratings meet U.S. EPA Tier 4 Interim equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Download Product Brochure

Power Rating

Minimum Rating
50bhp
Maximum Rating
65.9bhp
Rated Speed
2800-3000 rpm.

Emission Standards

Emissions
U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
84 mm (3.3 in)
Stroke
100 mm (3.9 in)
Displacement
2.216 L (135 in³)
Aspiration
Naturally Aspirated (NA), Turbocharged (T), or Turbo Aftercooled (TA)
Compression Ratio
23.3:1
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
6.98 L (7.4 qt)
Lube System (refill)
10.6 L (11.2 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
946-973 mm (37.24-38.3 in)
Width
513-590 mm (20.3-23.23 in)
Height
854-973 mm (33.62-38.3 in)
Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
218-228 kg (480-502 lb)

Standard Equipment

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Tier 4 Final: Alternator 12V 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted air cleaner
    • Mounted radiator and fan
  • Flywheels And Flywheel Housing
    • SAE No. 7 1/2 flywheel
    • SAE No. 4 flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for Power Take Off (PTO)
    • SAE A PTO drive (Tier 4 Final, Stage IV)
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request