Cat® C2.2 Diesel Engine

Cat® C2.2 Diesel Engine

The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.

Download Product Brochure

Power Rating

Minimum Power
48.8bhp
Maximum Power
67.1bhp
Rated Speed
2800 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage IIIB

General

Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel
Bore
84 mm (3.3 in)
Stroke
100 mm (3.9 in)
Displacement
2.2 L (135 in³)
Aspiration
Turbocharged (T) or Turbocharged-Aftercooled (TA)
Compression Ratio
18:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
4.3 L (4.5 qt)
Lube System (refill)
9.3 L (9.8 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
764 mm (30.07 in)
Width
545 mm (21.5 in)
Height
736 mm (28.9 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
230 kg (507 lbs)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
408.4 mm (16.07 in)
Weight
5.8 kg (12.79 lb)
Diameter
155 mm (6.1 in)
Length, including bolt heads
408.4 mm (16.1 in)
Diameter, to cover bolts
167 mm (6.6 in)

Standard Equipment

  • Control System
    • Alternator 12 volt 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
    • Electronic control unit - chassis mounted
    • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
    • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
  • Flywheels And Flywheel Housing
    • SAE No. 4 standard flywheel housing
    • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
  • Fuel System
    • 2000 bar high-pressure common rail system
    • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
  • Power Take Off (pto)
    • SAE A PTO drive
  • General
    • Cast iron engine block
    • Cast iron exhaust manifold
    • Gradeability 35° continuous
    • Paint: Cat yellow
  • U.s. Epa Tier 4 Final, Eu Stage Iiib Aftertreatment/clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)