Cat® C13 ACERT™ Diesel Engine

Cat® C13 ACERT™ Diesel Engine

The Cat® C13 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Industries and applications powered by C13 ACERT engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Download Product Brochure

Power Rating

Minimum Power
385.0bhp
Maximum Power
520.0bhp
Rated Speed
1800-2100 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final Nonroad, EU Stage IV Nonroad, U.S. EPA Tier 4 Interim Nonroad Equivalent (Not Currently EPA Certified) and EU Stage IIIB Nonroad Equivalent (Non-Current for EU) Emission Standards. Designed to meet proposed EU Stage V Nonroad Emiss

General

Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.1 in)
Stroke
157 mm (6.2 in)
Displacement
12.5 L (762.8 in³)
Aspiration
Turbocharged-Aftercooled (TA)
Compression Ratio
17.0:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
18.7 L (19.8 qt)
Lube System (refill)
34 L (35.9 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1203-1272 mm (47.2-50.1 in)
Width
933-996 mm (36.74-39.2 in)
Height
1132-1186 mm (44.6-46.7 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
1143-1350 kg (2520-2976 lb)

Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1053-1077 mm (41.5-42.4 in)
Width
779.8-1069 mm (30.7-42.1 in)
Height
451.3-654 mm (17.8-25.7 in)
Weight
248-259 kg (547-571 lb)
Diameter
330.2 mm (13 in)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Length
854 mm (33.6 in)
Width
287 mm (11.3 in)
Volume Capacity
48.4 L (51.1 qt)
Weight
19.42 kg (42.8 lb)
Height
551 mm (21.7 in)

Passive Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
974.8 mm (38.4 in)
Width
958.3 mm (37.7 in)
Height
547.2 mm (21.5 in)
Weight
140 kg (308.6 lb)

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (pto)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems