Cat® C11 ACERT™ Industrial Diesel Engine

Cat® C11 ACERT™ Industrial Diesel Engine

The Cat® C11 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 242-336 bkW (325-450 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C11 ACERT engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, Forklifts, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Sprayers, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Download Product Brochure

Power Rating

Minimum Power
Maximum Power
Rated Speed
1800-2100 rpm

Emission Standards

China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent


Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
130 mm (5.12 in)
140 mm (5.51 in)
11.1 L (677.36 in³)
Turbocharged Aftercooled (TA)
Compression Ratio
Combustion System
Direct Injection
Rotation (from flywheel end)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

1203 mm (47.4 in)
1054.4 mm (41.5 in)
1186 mm (46.7 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
930 kg (2050 lb)

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request