Cat® G3306 Industrial Gas Engine

Cat® G3306 Industrial Gas Engine

Cat® G3306 Industrial Gas Engine. Ratings: 108-157 bkW (145-211 bhp) @ 1800 rpm are NSPS site compliant capable with customer-supplied aftertreatment. Some ratings also have standard emission settings available for export only. For specific emission information, please consult your local Cat Dealer.

Download Product Brochure

General

Bore
121 mm (4.75 in)
Stroke
152 mm (6.0 in)
Displacement
10.5 L (638 in³)
Aspiration
Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous

Power Rating

Minimum Power
145.0bhp
Maximum Power
211.0bhp
Frequency
1800 rpm

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Weight, Net Dry
948 kg (2090 lb)
Height
1261 mm (50 in)
Width
978 mm (38 in)
Length
1539 mm (60 in)

Standard Equipment

  • Air Inlet System
    • Air cleaner
    • Air cleaner rain cap
    • Service indicator
  • Control System
    • Hydra-mechanical governor
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheels & Flywheel Housings
    • SAE No. 1 flywheel
    • SAE No. 1 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Ignition System
    • Altronic V ignition system
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter
    • Oil pan — full sump
    • Oil filler and dipstick
  • Mounting System
    • Engine supports
  • Protection System
    • Shutoffs
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and pulley
    • Lifting eyes

Optional Equipment

  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
  • Control System
    • PSG Woodward governor
    • Vernier and positive locking control
  • Cooling System
    • ATAAC conversion
    • Aftercooler group
    • Expansion tank
    • Heat exchanger and expansion tank
    • Radiator
    • Blower fan for customer supplied radiators
    • Suction fan for customer supplied radiators
    • Fan drives for customer supplied radiators
    • Fan adapter for customer supplied radiators
    • Belt tightener
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Pipes
    • Rain caps
    • Mufflers
  • Fuel System
    • Low pressure gas conversion
    • Fuel filter
  • Ignition System
    • Altronic III
    • CSA shielded ignition
    • Wiring harness
    • Dual timing
  • Instrumentation
    • Gauges and instrument panels
  • Lube System
    • Lubricating oil
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys and auxiliary pump
    • Enclosed clutch and clutch support
    • Flywheel stub shaft
    • Front stub shaft
  • Protection System
    • Mechanical shutoff
    • Gas valves
  • Starting System
    • Air starting motor
    • Air pressure regulator
    • Air silencer
    • Electric starting motors with start switch installed/shipped loose
    • Starting aids
    • Battery sets
  • General
    • Tool set