G3606 Gas Compression Engine

G3606 Gas Compression Engine

G3600 engines provide a wide range of power options to fit your gas compression application. G3600 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3500B engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 gas engine with ratings: 1324-1413 bkW (1775-1895 bhp) @ 1000 rpm are NSPS site compliant capable.

Download Product Documents

Click a link to download the document:

Engine Specifications

Minimum Rating
1775.0bhp
Maximum Rating
1895.0bhp
Emissions
NSPS Site Compliant Capable
Displacement
7762.0in3
Compression Ratio
9.2:1
Aspiration
Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Flywheel Teeth
255
Weight (dry)
34560.0lb
Oil Change Interval
5000 hours
Ignition, Protection
Electronic (ADEM™ A3)
Stroke
11.8in
Bore
11.8in

Capacity for Liquids

Cooling System
106.0gal
Lube Oil System (refill)
187.0gal

Standard Equipment

  • Air Inlet System
    • Air cleaner — standard-duty inlet air adapter
  • Control System
    • ADEM A3 control system provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
  • Cooling System
    • Jacket water pump
    • Jacket water thermostats and housing
    • Aftercooler pump
    • Aftercooler water thermostats and housing
    • Single-stage aftercooler
  • Exhaust System
    • Dry wrapped exhaust manifolds
    • Vertical outlet adapter
  • Flywheels And Flywheel Housing
    • SAE standard rotation
  • Fuel System
    • Gas admission valves with electronically controlled fuel supply pressure
  • Ignition System
    • A3 control system senses individual cylinder detonation and controls individual cylinder timing
  • Instrumentation
    • LCD display panel monitors engine parameters and displays diagnostic codes
  • Lube System
    • Crankcase breathers (top mounted)
    • Oil cooler
    • Oil filter
    • Oil pan drain valve
  • Mounting System
    • Engine mounting feet (four total)
  • Protection
    • Electronic shutoff system with purge cycle
    • Crankcase explosion relief valves
    • Gas shutoff valve
  • Starting System
    • Air starting system
  • General
    • Paint — Cat yellow
    • Vibration dampers

Optional Equipment

  • Air Inlet System
    • Heavy-duty air cleaner with precleaners
    • Heavy-duty air cleaner with rain protection
  • Charging System
    • Charging alternators
  • Control System
    • Custom control system software is available for nonstandard ratings. Software is field programmable using flash memory.
  • Cooling System
    • Expansion tank
    • Flexible connections
    • Jacket water heater
  • Exhaust System
    • Flexible bellows adapters
    • Exhaust expander
    • Weld flanges
  • Fuel System
    • Fuel filter
    • Gas pressure regulator
    • Flexible connection
    • Low energy fuel system
    • Corrosive gas fuel system
  • Ignition System
    • CSA certification
  • Instrumentation
    • Remote data monitoring and speed control
    • Compatible with Cat® Electronic Technician (ET) and Data View
    • Communication Device — PL1000T/E
    • Display panel deletion is optional
  • Lube System
    • Air or electric motor-driven prelube
    • Duplex oil filter
    • LH or RH service
    • Lube oil makeup system
  • Mounting System
    • Mounting plates (set of six)
  • Power Take-offs
    • Front stub shafts
  • Starting System
    • Air pressure reducing valve
    • Natural gas starting system
  • General
    • Engine barring device
    • Damper guard