CN5086 Electric Motor

CN5086 Electric Motor

Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

Download Product Brochure

Electric Motor Specifications

Electric Motor Type
Squirrel Cage Induction Motor
Number of Poles
8
Full Load Speed
894.0rpm
Voltage/Frequency
4000V ± 10%/60 Hz
Type of EX-protection
Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC)
Mounting Designation
F1 or F2
Enclosure Type/Method of Cooling
WP-II
Insulation
Class F
Service Factor
1.15SF
Standards
NEMA MG1
Max Ambient Temperature
104°F
Max Altitude Before Derate
3000ft
Duty
Continuous
Temperature Rise
Class B at rated load
Connection of Stator Winding
Star
Full Load Current
658 Amps
Locked Rotor Amps
520% Code E
Locked Rotor Torque
60%
Breakdown Torque
190%
No Load Current
200 Amps
Rated Torque
29366lb-ft
Shaft
8.5in

Standard Equipment

  • Bearings
    • Self-lubricated sleeve bearings
    • Insulated non-drive end bearings to reduce bearing currents
    • Bearing RTDs for temperature monitoring
  • Rotors
    • Designed for minimal vibration
    • Dynamic balancing at full operational speed
    • Fabricated copper squirrel cages
    • Oversized, forged, keyless shaft
    • AISI 4140/DIN42CrMo4 shaft
  • Stators
    • Radial air ducts ensure uniform and efficient cooling
    • Vacuum pressure impregnated with specially formulated epoxy resin
    • 2X RTDS per Phase
    • Space heater
    • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

Optional Equipment

  • Oversized Terminal Box
  • Surge Protection
  • Differential CTs
  • Differential Pressure Switch
  • Oil Sump Heater and Controller
  • Star Point Convection in Terminal Box
  • Blower Motor Cooling
  • Right-hand or left-hand (F1 or F2) Main Terminal Box