930M Ag Handler

Weights

Operating Weight
31876lb

Buckets

Bucket Capacities
3.1-5.0 m3 (4.0-6.5 yd3)
Bucket Capacities – Light Material
3.1-5.0 m3 (4.0-6.5 yd3)

Engine

Maximum Gross Power – Maximum Engine Speed (Standard Power Mode; Speed Range 1-3*)
1600rpm
Maximum Gross Power – ISO 14396 (Standard Power Mode; Speed Range 1-3*)
160hp
Maximum Gross Power – ISO 14396 (DIN) (Standard Power Mode; Speed Range 1-3*)
162hp
Rated Net Power at 1,600 rpm – SAE J1349 (Standard Power Mode; Speed Range 1-3*)
154hp
Rated Net Power at 1,600 rpm – SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)
141hp
Engine Model
Cat C7.1 ACERT
Rated Net Power at 1,600 rpm – ISO 9249 (DIN) (Standard Power Mode; Speed Range 1-3*)
158hp
Maximum Gross Torque – ISO 14396 (Standard Power Mode; Speed Range 1-3*)
592lbf-ft
Maximum Net Torque – SAE J1349 (Standard Power Mode; Speed Range 1-3*)
566lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)
572lbf-ft
Displacement (Standard Power Mode; Speed Range 1-3*)
427in3
Maximum Gross Power – Maximum Engine Speed (Performance Power Mode; Speed Range 1-4)
1800rpm
Maximum Gross Power – ISO 14396 (Performance Power Mode; Speed Range 1-4)
164hp
Maximum Gross Power – ISO 14396 (DIN) (Performance Power Mode; Speed Range 1-4)
166hp
Rated Net Power at 1,800 rpm – SAE J1349 (Performance Power Mode; Speed Range 1-4)
157hp
Rated Net Power at 1,800 rpm – SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)
143hp
Rated Net Power at 1,800 rpm – ISO 9249 (DIN) (Performance Power Mode; Speed Range 1-4)
162hp
Maximum Gross Torque – ISO 14396 (Performance Power Mode; Speed Range 1-4)
592lbf-ft
Maximum Net Torque – SAE J1349 (Performance Power Mode; Speed Range 1-4)
566lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)
572lbf-ft
Displacement (Performance Power Mode; Speed Range 1-4)
427in3
Emissions
Engine meets Tier 4 Final emission standards.
Note
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
Maximum Gross Power
164hp
Note
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
Note
*Range 4 power is boosted to be the same as Performance Mode.

Steering

Steering Articulation Angle (each direction)
40°
Steering Cycle Times (full left to full right): At 1,800 rpm: 90 rpm steering wheel speed
2.4seconds
Number of Steering Wheel Turns – full left to full right or full right to full left
3.5turns
Maximum Flow – Steering Pump
34gal/min
Maximum Working Pressure – Steering Pump
3500psi
Maximum Steering Torque: 0 degrees (straight machine)
37155lbf-ft
Maximum Steering Torque: 40 degrees (full turn)
27747lbf-ft

Loader Hydraulic System

Maximum Flow – Implement Pump
50gal/min
Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
50gal/min
Maximum Flow – Implement Pump: 4th Function Maximum Flow*
42gal/min
Maximum Working Pressure – Implement Pump
4061psi
Relief Pressure – Tilt Cylinder
4351psi
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
4061psi
Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure
4061psi
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Raise (ground level to maximum lift)
4.8seconds
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Dump (at maximum lift height)
1.6seconds
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Float Down (maximum lift to ground level)
1.8seconds
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Total Cycle Time
8.2seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Raise (ground level to maximum lift)
4.3seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Dump (at maximum lift height)
1.4seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Float Down (maximum lift to ground level)
1.8seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Total Cycle Time
7.5seconds
Note
*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.

Service Refill Capacities

Fuel Tank
51.5gal
Cooling System
7.9gal
Engine Crankcase
5.3gal
Transmission (gearbox)
2.2gal
Axles: Front
6.9gal
Axles: Rear
6.6gal
Hydraulic System (including tank)
43.6gal
Hydraulic Tank
23.8gal
Diesel Exhaust Fluid (DEF) Tank
5gal
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Transmission

Forward and Reverse: Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse: Range 2
8mph
Forward and Reverse: Range 3
17mph
Forward and Reverse: Range 4
25mph
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
Note
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Tires

Standard Size
20.5 R25, radial (L-3)
Other Choices Include:
20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Dimensions and Operating Specifications (Approximate) – 3.1 m³ (4.1 yd³) Bucket

Height: Ground to Cab**
10.92ft
Height: Ground to Beacon**
12.08ft
Height: Ground Axle Center**
2.17ft
Height: Ground Clearance**
1.25ft
Length: Overall*
27.25ft
Length: Rear Axle to Bumper
6.50ft
Length: Hitch to Front Axle
4.92ft
Length: Wheel Base
9.83ft
Clearance: Bucket at 45 degrees*
10.42ft
Clearance: Loadover Height**
11.58ft
Clearance: Level Bucket**
13.33ft
Height: Bucket Pin**
14.42ft
Height: Overall**
18.67ft
Reach: Bucket at 45 degrees*
4.42ft
Carry Height: Bucket Pin
2.00ft
Dig Depth**
5.3in
Width: Bucket
9.00ft
Width: Tread Center
6.25ft
Turning Radius: Over Bucket
20.92ft
Width: Over Tires
8.33ft
Turning Radius: Outside of Tires
17.67ft
Turning Radius: Inside of Tires
9.33ft
Rack Angle at Full Lift
51 degrees
Dump Angle at Full Lift
44 degrees
Rack Angle at Carry
48 degrees
Departure Angle
33 degrees
Articulation Angle
40 degrees
Tipping Load – Straight (ISO 14397-1)*
16430lb
Tipping Load – Full Turn (ISO 14397-1)*
13934lb
Breakout*
18808lb
Operating Weight*
31876lb
Note
*Vary with bucket.
Note
**Vary with tire.
Note
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Dimensions and Operating Specifications (Approximate) – 3.5 m³ (4.6 yd³) Bucket

Height: Ground to Cab**
10.92ft
Height: Ground to Beacon**
12.08ft
Height: Ground Axle Center**
2.17ft
Height: Ground Clearance**
1.25ft
Length: Overall*
27.58ft
Length: Rear Axle to Bumper
6.50ft
Length: Hitch to Front Axle
4.92ft
Length: Wheel Base
9.83ft
Clearance: Bucket at 45 degrees*
10.17ft
Clearance: Loadover Height**
11.58ft
Clearance: Level Bucket**
13.33ft
Height: Bucket Pin**
14.42ft
Height: Overall**
19.00ft
Reach: Bucket at 45 degrees*
4.67ft
Carry Height: Bucket Pin
2.00ft
Dig Depth**
5.3in
Width: Bucket
9.00ft
Width: Tread Center
6.25ft
Turning Radius: Over Bucket
21.92ft
Width: Over Tires
8.33ft
Turning Radius: Outside of Tires
17.67ft
Turning Radius: Inside of Tires
9.33ft
Rack Angle at Full Lift
51 degrees
Dump Angle at Full Lift
44 degrees
Rack Angle at Carry
48 degrees
Departure Angle
33 degrees
Articulation Angle
40 degrees
Tipping Load – Straight (ISO 14397-1)*
16070lb
Tipping Load – Full Turn (ISO 14397-1)*
13592lb
Breakout*
17246lb
Operating Weight*
32136lb
Note
*Vary with bucket.
Note
**Vary with tire.
Note
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Standard Equipment

  • Power Train
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine
      • Power modes (Standard and Performance)
      • Power by range (High Power in Range 4)
      • Turbocharged and aftercooled
      • Filtered crankcase breather
      • Diesel particulate filter
      • Selective Catalyst Reduction
    • Coded start (requires secondary display)
    • Coolant protection to –34° C (–29° F)
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      • Operator modes (Default, TC, Hystat, and Ice)
      • Directional Shift Aggressiveness (fast, medium, slow)
      • Rimpull control, adjust wheel torque
      • Creeper control, adjust ground speed
    • Locking differential front axle – on the go engagement with “Always ON” feature
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow) in fork mode
    • Hydraulic response setting (fast, medium, slow)
    • Hydraulic diagnostic connectors and S·O·SSM ports
    • Load sensing hydraulics and steering
  • Electrical
    • Alternator, 115 amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Debris package (reversing fan)
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted electronic implement controls, adjustable
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
  • Other Standard Equipment
    • High Lift linkage
    • Large-access enclosure doors with adjustable close/open force
    • Parallel Lift loader linkage

Optional Equipment

  • Optional Equipment
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function, adjustable through secondary display
    • Auxiliary tool box
    • Beacon light, strobe
    • Cab, deluxe
      • Electrically adjustable external heated mirrors (2)
      • Secondary touch screen display to enable features and adjust parameters
      • Sunscreen, front and rear
      • Windshield washing access steps
    • Camera, rearview
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Guarding (machine and operator)
    • Guarding (power train and light)
    • Lights, auxiliary, halogen or LED with engine compartment lights
    • Limited slip rear axle
    • Object Detection
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid backrest and mechanical lumbar support
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM) integrated into secondary display