PMC-V Human Machine Interface for PMC-D Drive Control Systems

PMC-V Human Machine Interface for PMC-D Drive Control Systems

In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.

Download Product Documents

Features

  • Human machine interface for configuration and customization of the PMC-D/V family
  • Diagnostic features for whole system
  • Process visualization
  • Change of parameters
  • Communication link to other systems
  • Additional sensor inputs

Components

Operating System
µITRON RTOS
Processor
32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory
4Mbytes CMOS Static RAM, 4Mbytes Flash

Electrical Sockets

Socket 1 - Pin 1
Optocoupler Anode
Socket 1 - Pin 2
Relay Contact NO: a
Socket 1 - Pin 3
Relay Contact NO: b
Socket 1 - Pin 4
Optocoupler Kathode
Socket 10 - Pin 1
+12 V (A)
Socket 10 - Pin 2
Measurement Input 3
Socket 10 - Pin 3
+8.2 V
Socket 10 - Pin 4
GND
Socket 11 - Pin 1
Options
Socket 11 - Pin 2
Options
Socket 11 - Pin 3
Options
Socket 11 - Pin 4
Options
Socket 12 - Pin 2
Profibus: a (internal)
Socket 12 - Pin 3
Profibus: b (internal)
Socket 2 - Pin 1
+12 V (A)
Socket 2 - Pin 2
Serial Interface: RxD
Socket 2 - Pin 3
Serial Interface: TxD
Socket 2 - Pin 4
GND
Socket 3 - Pin 1
+12 V (B)
Socket 3 - Pin 2
Serial Interface: RxD
Socket 3 - Pin 3
Serial Interface: TxD
Socket 3 - Pin 4
GND
Socket 4 - Pin 1
+12 V (C)
Socket 4 - Pin 2
Serial Interface: RxD
Socket 4 - Pin 3
Serial Interface: TxD
Socket 4 - Pin 4
GND
Socket 5 - Pin 1
Options
Socket 5 - Pin 2
Options
Socket 5 - Pin 3
Options
Socket 5 - Pin 4
Options
Socket 6 - Pin 2
Profibus: a (internal)
Socket 6 - Pin 3
Profibus: b (internal)
Socket 7 - Pin 1
+12 V Input
Socket 7 - Pin 2
Serial Interface: TxD
Socket 7 - Pin 3
Serial Interface: RxD
Socket 7 - Pin 4
GND Input
Socket 8 - Pin 1
+12 V (B)
Socket 8 - Pin 2
Measurement Input 1
Socket 8 - Pin 3
+8.2 V
Socket 8 - Pin 4
GND
Socket 9 - Pin 1
+12 V (C)
Socket 9 - Pin 2
Measurement Input 2
Socket 9 - Pin 3
+8.2 V
Socket 9 - Pin 4
GND

Options (Designations of options equal the second and third to last characters of type designation listed on equipment.)

Socket 11 - Pin 1
AB
Socket 11 - Pin 1
**
Socket 11 - Pin 2
AB (Profibus: a [external])
Socket 11 - Pin 2
**
Socket 11 - Pin 3
AB (Profibus: b [external])
Socket 11 - Pin 3
**
Socket 11 - Pin 4
**
Socket 11 - Pin 4
AB
Socket 5 - Pin 1
AB
Socket 5 - Pin 1
**
Socket 5 - Pin 2
AB (Profibus: a [external])
Socket 5 - Pin 2
**
Socket 5 - Pin 3
AB (Profibus: b [external])
Socket 5 - Pin 3
**
Socket 5 - Pin 4
AB
Socket 5 - Pin 4
**

Global Certifications

Types
Europe: ATEX
Types
U.S.: MSHA
Types
More certifications on demand
Types
Australia: IECEx, ANZEx
Types
China: MA
Types
Russia: GOST

Electrical Data

Supply Current - Maximum Ratings
1.5amps
Supply Current - Typical Value
1.0amps
Supply Voltage - Maximum Ratings
9.5 V - 13.2 V
Supply Voltage - Typical Value
12 V DC

Environmental Data

Temperature - Maximum Ratings
-20° C - +40° C (-4° F - +104° F)
Temperature - Symbol
Tamb
Temperature - Typical Value
68.0° F

Dimensions (Approximate)

Height
5.83in
Length
13.19in
Width
9.49in

Main Technical Data

Components
320 × 240 pixel b/w graphics display
Components
IP 68
Components
Optional additional Profibus communication channel for communication with third party computer
Components
12 SKK24 sockets for power supply, communication, sensors and actuators
Components
Power: 12 W