305E2 CR Hydraulic Excavators

305E2 CR Hydraulic Excavators

The Cat E2 Series Mini Hydraulic Excavators are designed to carry on the solid performance of their E Series predecessors, while adding even greater value for the customer. The new High Definition Hydraulic (HDH) System, redesigned operator station and enhanced digital control panel specially designed for Cat Mini Excavators – COMPASS (Complete, Operation, Maintenance, Performance And Security System) – are all standard features that improve performance and increase value.

Download Product Documents

Click a link to download the document:

Operator Station

Productivity with Comfort and Quality

Comfortable Working Environment

The high quality suspension seat, 76 mm (3 in) retractable seat belt, easy to adjust armrests, and ergonomic layout provide superior comfort and reduce operator fatigue. The new interlocking front window system, updated operator interface and 100% pilot controls provide a best-in-class operator station and customer value.

Joystick Controls

The boom swing and auxiliary hydraulic functions are located at your fingertips providing smooth, easy operation. They also eliminate foot pedals and free up the floor for more room for the operator’s feet. 100% pilot controls provide consistent flow and pressure throughout the life of the machine. This allows all controls to be locked out while starting the machine.

Operation and Hydraulic Control

Pushing Performance to the Limit

Powerful Digging, Precise Control

The new High Definition Hydraulic (HDH) System in the E2 machines provides a load sensing and flow sharing capability leading to operational precision, efficient performance and greater control. By combining variable pump efficiency, open center valve simplicity, and a simple architecture the valve achieves controllability. The simple valve architecture reduces heat which leads to a reduction in hydraulic instability and improved overall efficiency.

200 Degree Bucket Rotation

Industry leading bucket rotation of over 200 degrees provides greater material retention during truck loading. It also allows for easier vertical wall digging without repositioning the machine.

Engine

Intelligent Operation

Engine

Each of the E2 models is equipped with the engine solution to best support the power and performance required based on the weight class and application. Also, standard features like auto idle offer consistent lower engine speeds to increase engine life and offer fuel savings.

Automatic Two Speed

With the standard automatic two speed feature, the machine will automatically balance high speed and torque travel requirements based on job site conditions to give the operator the optimum speed and control. The machine can be put in low gear if slower travel is desired while in tight conditions.

COMPASS Control Panel

Complete, Operation, Maintenance, Performance and Security System

UNLOCK the new features and experience the value of the exclusive COMPASS control panel on the E2 Series compact excavators

The COMPASS control panel on the Cat E2 Series mini hydraulic excavators was specifically designed by Caterpillar for compact excavators. It adds several new features to the machines increasing the amount of customer value. All of the following features are now standard on all E2 Series models. Complete – All of the control panel features are standard; Operation – Simple operation of the pattern changer, hydraulic quick coupler and fuel gauge visibility all at the push of a button; Maintenance – Maintenance intervals, diagnostics and work hours; Performance – Save up to 20% fuel while maintaining optimum performance levels; And; Security – Anti-theft device with individual user and master passwords; System – Ergonomically designed control panel

Passcode Protected Security System

A standard anti-theft device now comes on every E2 Series compact excavator. A five digit alphanumeric password is required to start the machine when the anti-theft feature is enabled. There is a master password and up to five user passwords can be created by the owner if desired. Keep your machine safe on a busy job site by locking it when you are not around.

Adjustable Auxiliary Work Tool Flow Control

The E2 Series machines now have simple adjustability of the flow going down the boom and stick to the work tool. Both the standard main line and optional secondary auxiliary hydraulics can be adjusted on a scale of 1–15 through a few buttons on the control panel. Adjust the flow to your different tools with a simple push of a button.

Continuous Flow

Once this feature is enabled through a button on the monitor, the E2 Series machines can run in continuous flow mode. With the auxiliary hydraulics on the right hand joystick, just hold the roller switch at the desired flow rate and direction for 2.5 seconds and the machine will maintain that flow rate until it is turned off. Maintain hydraulic flow to your tools at any flow and in any direction with the simple push of a button.

Pattern Changer

Change the operating pattern between excavator and backhoe with a simple press of a button from the comfort of the cab. Exclusive push button pattern changer is safe and easy.

Maintenance and Performance Information

Easily keep track of various maintenance and performance parameters of your machine. Reset the maintenance intervals and ensure the machine is receiving proper care maximizing the life of the machine.

Compact Radius Design

Ease of Transport, Access and Operation

Compact Radius

The compact radius design gives greater machine versatility and the capability to work within confined areas. This allows the operator to concentrate on the work being done without having to worry about damaging the back of the machine or other job site obstacles. On the 305E2 CR, the upper body stays within 140 mm (5.5 in) of the undercarriage.

Undercarriage

A Strong Foundation

Rubber Track

The standard rubber track lets you work on multiple surfaces such as grass, pavement or stone without damaging the surface or machine.

Steel Track Option

Optional steel track is available for harsh conditions such as demolition. The extra weight of the steel tracks generally provides better stability when digging over the side of the machine.

Rubber Pads

Optional rubber pads can be attached to the steel track to prevent damage to paved surfaces and minimize noise and vibration during travel with the steel track system. This option provides the maximum overall stability.

Dozer Blade

Maximize your productivity

Simple Dozer Control with Float Function

The dozer function is pilot controlled from inside the cab, providing smooth, proportional operation. The standard float function is enabled by pushing the lever fully forward into the detent position. Cleanup and backfilling is easier since the operator does not have to adjust the blade height during travel.

Excellent Blade Visibility

Visibility to the blade is excellent in any position, allowing the blade to be positioned behind the operator and away from the front linkage for better access when back dragging and finishing in tight areas.

Angle Blade Option

Increase machine versatility with the Cat angle dozer blade. Built for strength and durability, the hydraulic angle blade features a hardened steel wear edge and good protection to cylinders and hydraulic lines. The angle blade can be positioned straight ahead or angled up to 25 degrees to the left or right. This reduces the number of times required to back up and reposition when backfilling so you can finish the job faster. All functions of the blade are controlled with one joystick using a proportional roller switch for the angle function.

Coupler and Work Tool Options

Versatility for Any Application

Couplers

The E2 Series is available with a mechanical pin-grabber or a hydraulic pin-grabber quick coupler option. The coupler design uses a wedge to keep the tool secure to the coupler, reducing wear and maintaining a tight fit through the life of the coupler. The hydraulic coupler allows the operator to change tools without leaving the comfort of the cab.

Wide Range of Work Tools

A wide range of Cat Work Tools have been designed specifically for the Cat Mini Hydraulic Excavators to maximize machine performance. Available work tools include:

  • Buckets (heavy duty and heavy duty capacity)
  • Tilting, Ditch Cleaning Buckets
  • Hydraulic Hammers
  • Augers
  • Thumbs (not available in all regions)
  • Vibratory Compactors
  • Shears (boom mounted)
  • Quick Coupler

Standard Thumb Ready Sticks

Machines come standard with stick mounted brackets, ready to fit a hydraulic thumb for even greater machine versatility. A factory installed bracket and relief valve make hydraulic thumb installation simple and cost-effective.

Standard Auxiliary Lines and Accumulator

One-way and two-way auxiliary lines (combined function), including quick connections, are fitted as standard equipment so the machine comes ready to work. A standard accumulator allows for auxiliary pressure to be released, making connecting and disconnecting work tools safer and easier.

Serviceability and Support

Maximized Uptime and Ease of Service

Easy Service

Extended service intervals, durable components, and ease of service access points decrease your owning and operating costs while increasing your long-term value.

  • Lifting side hood allows access to air filter, main implement valve, 1-way/2-way auxiliary flow selector, accumulator, fuel filter and hydraulic tank. This eliminates the need to lift the cab when maintaining and servicing the machine.
  • Swing open door provides access to major components and service points including engine oil check and fill, vertically mounted engine oil filter, starter motor and alternator.
  • Easy access to the radiator and oil cooler results in simplified cleaning and reduced maintenance times.
  • S·O·SSM oil sampling valve allows easy sampling of the hydraulic fluid for preventative maintenance.
  • 500 hour engine oil and filter change period reduces operating costs and machine downtime.

Customer Support You Can Count On

Your Cat dealer is ready to assist you with your purchase decision and everything after.

  • Financing packages are flexible to meet your needs.
  • Unmatched parts availability keeps you working.
  • Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production.
  • Your Cat dealer can evaluate the cost to repair, rebuild and replace your machine.
  • For more information on Cat products, dealer services and industry solutions, visit www.cat.com.

Engine

Engine Model
Cat® C2.4
Net Power
40.2hp
Net Power (ISO 9249)
40.2hp
Bore
3.4in
Stroke
4in
Displacement
146in3
Rated Net Power (ISO 9249)
40.2hp
Gross Power
41.8hp
Note
Cat C2.4 engine meets U.S. EPA Tier 4 Interim/EU Stage IIIA emission standards.

Weights

Operating Weight
11433lb
Operating Weight with Cab
11433lb
Operating Weight with Canopy
11069lb
Note
Weight includes rubber tracks, bucket, operator, full fuel and auxiliary lines.

Hydraulic System

Pump Flow
39.6gal/min
Operating Pressure – Equipment
3553psi
Operating Pressure – Travel
3553psi
Operating Pressure – Swing
3132psi
Auxiliary Circuit – Primary
21.1gal/min
Auxiliary Circuit – Secondary
6.6gal/min
Digging Force = Stick (standard)
5553lbf
Digging Force = Stick (long)
4788lbf
Digging Force = Bucket
10049lbf
Note
Load sensing hydraulics with variable displacement piston pump.

Swing System

Machine Swing Speed
10rpm
Boom Swing – Left (without stop)
80°
Boom Swing – Left (with stop)
60°
Swing – Right
50°

Blade

Width
78in
Height
14.8in
Dig Depth
21.9in
Lift Height
15.9in

Service Refill Capacities

Cooling System
2.8gal
Engine Oil
2.5gal
Hydraulic Tank
18gal
Fuel Tank
16.6gal
Hydraulic System
20.6gal

Travel System

Travel Speed – High
2.7mph
Travel Speed – Low
1.7mph
Maximum Traction Force – High Speed
5418lbf
Maximum Traction Force – Low Speed
10161lbf
Ground Pressure
4.5psi

Operating Specifications

Maximum Dig Depth
144in

Standard Equipment

  • 1-way and 2-way (combined function) auxiliary hydraulic lines
  • Adjustable auxiliary flow control for work tools
  • Adjustable wrist rests
  • Alternator
  • Anti-theft security system
  • Automatic engine idle
  • Automatic swing park brake
  • Automatic two speed travel
  • Auxiliary line quick disconnects
  • Boom cylinder guard
  • Cab mounted work light
  • Canopy with Top Guard ISO 10262 (Level 1), ROPS ISO 12117-2 and TOPS ISO 12117
  • Coat hook
  • COMPASS display panel
  • Cup holder
  • Continuous flow
  • Control pattern changer (not available in Europe)
  • Dozer blade with float function
  • Floor mat
  • Foot travel pedals
  • Horn
  • Hydraulic oil cooler
  • Lifting eye on bucket linkage (standard equipment for all regions except Europe)
  • Lockable storage box
  • Low maintenance linkage pin joints
  • Maintenance free battery
  • Rubber track
  • Retractable seatbelt
  • Stick
    • – Standard stick
  • Suspension seat, vinyl covered
  • Thumb Ready sticks (standard equipment for all regions except Europe)
  • Travel alarm (optional in Europe)

Optional Equipment

  • Air conditioning
  • Angle dozer blade with float function
  • Beacon socket for canopy machines
  • Boom check valve (Europe only)
  • Boom mounted light
  • Cab, radio ready with Top Guard ISO 10262 (Level 1), ROPS ISO 12117-2 and TOPS ISO 12117 with heater/defroster, interior light and windshield wiper/washer
  • Ecology drain valve for hydraulic tank
  • High back suspension seat, fabric covered
  • Hydraulic quick coupler lines
  • Lifting eye on bucket linkage (optional in Europe, standard for all other regions)
  • Stick
    • – Long stick
  • Mechanical quick coupler
  • Mirrors for cab and canopy
  • Seatbelt, 75 mm (3 in) wide (optional in Europe, standard in all other regions)
  • Secondary auxiliary hydraulic lines
  • Steel track and steel track with rubber pads