MD6540 Rotary Blasthole Drill

MD6540 Rotary Blasthole Drill

Download Product Documents

Click a link to download the document:

Mandatory Attachments (Installed at Factory)

Select one from each group. Mandatory attachments may vary. Consult your Cat® dealer for specifics.

MAST SELECTIONS 20 METER CONFIGURATION

  • 19.86 m (65'2") Single Pass Hole Depth using 2 × 9.14 m (30 ft) S-S drill pipes and 310 cm (122 in) long bit sub: – 65.5 m (215 ft) Total Hole Depth multi pass using carousel – Carousel for five (5) 9.14 m (30 ft) long S-S × 219 mm (85⁄8 in) OD pipes – All hole depths with drill on tracks, changing bit above the deck – Winch 1587 kg (3,500 lb) capacity
  • 19.86 m (65'2") Single Pass Hole Depth using 2 × 9.14 m (30 ft) S-S drill pipes and 310 cm (122 in) long bit sub: – 65.5 m (215 ft) Total Hole Depth multi pass using carousel – Carousel for five (5) 9.14 m (30 ft) long S-S × 235 mm (91⁄4 in) OD pipes – All hole depths with drill on tracks, changing bit above the deck – Winch 1587 kg (3,500 lb) capacity
  • 19.86 m (65'2") Single Pass Hole Depth using 2 × 9.14 m (30 ft) S-S drill pipes and 310 cm (122 in) long bit sub: – 56.4 m (185 ft) Total Hole Depth multi pass using carousel – Carousel for four (4) 9.14 m (30 ft) long S-S × 273 mm (103⁄4 in) OD pipes – All hole depths with drill on tracks, changing bit above the deck – Winch 1587 kg (3,500 lb) capacity

MAST SELECTIONS 16 METER CONFIGURATION

  • 16.15 m (53 ft) Single Pass Hole Depth using 13.7 m (45 ft) S-S drill pipe and 396 cm (156 in) long bit sub: – 84.73 m (278 ft) Total Hole Depth multi pass using carousel – Carousel for five (5) 13.7 m (45 ft) long S-S × 219 mm (85⁄8 in) OD pipes – With drill on tracks – changing bit above the deck – Winch 3492 kg (7,700 lb) capacity
  • 16.15 m (53 ft) Single Pass Hole Depth using 13.7 m (45 ft) S-S drill pipe and 396 cm (156 in) long bit sub: – 84.73 m (278 ft) Total Hole Depth multi pass using carousel – Carousel for five (5) 13.7 m (45 ft) long S-S × 235 mm (91⁄4 in) OD pipes – With drill on tracks – changing bit above the deck – Winch 3492 kg (7,700 lb) capacity
  • 16.15 m (53 ft) Single Pass Hole Depth using 13.7 m (45 ft) S-S drill pipe and 396 cm (156 in) long bit sub: – 84.73 m (278 ft) Total Hole Depth multi pass using carousel – Carousel for four (4) 13.7 m (45 ft) long S-S × 273 mm (103⁄4 in) OD pipes – With drill on tracks – changing bit above the deck – Winch 3492 kg (7,700 lb) capacity

TOP DRIVE GROUP (must select one)

  • Top drive – high speed/low torque: – Two (2) motors – Rotation speed 0-150 rpm – Torque up to 17 219 N·m (12,700 lbf-ft)
  • Top drive – low speed/high torque: – Two (2) motors – Rotation speed 0-124 rpm – Torque up to 20 880 N·m (15,400 lbf-ft)

MACHINE DECAL LANGUAGE GROUP (must select one)

  • Machine Decal Group – English
  • Machine Decal Group – Spanish

Specifications

Bit Load
up to 54 000 kg (up to 119,050 lb)
Hole Diameter
229-381 mm (9.0-15 in)
Engine
Series 2000 16V – 899 kW (1,205 hp) at 1,800 rpm
Multi-Pass Hole Depth (16 m Mast)
Up to 84.73 m (278 ft)
Multi-Pass Hole Depth (20 m Mast)
Up to 65.58 m (215 ft 2 in)
Single-Pass Hole Depth (16 m Mast)
Up to 16.15 m (53 ft)
Single-Pass Hole Depth (20 m Mast)
Up to 19.86 m (65 ft 2 in)
Working Weight
288806.0lb

Rotary Drive System

Drive motor
See Hydraulic System
Gearbox
Casting design
Gearing
Straight spur
Lubrication
Oil flooded
Main thrust bearing
Taper roller
Ratio
16:1
Rotation power
363.0hp
Rotation speed
0-150 rpm HSLT (standard); 0-124 rpm LSHT option
Torque – LSHT option
0-20 880 N∙m (15,400 lbf-ft)
Torque – Standard HSLT
0-17 219 N∙m (12,700 lbf-ft)

Cooler Assemblies

Engine Radiator/Cooler – Size
2540 mm wide × 2057 mm tall (100 in wide × 81 in tall)
Engine Radiator/Cooler – Top tank
Sealed deaeriation tank, pressure cap, overflow tube and sight glass
Engine Radiator/Cooler – Type
Jacket water and secondary loop, stacked
Fan (common to each unit) 2 per cooler – 1067 mm diameter (42 in); 6 blades, 1 per motor – Fan guard
Welded
Fan (common to each unit) 2 per cooler – 1067 mm diameter (42 in); 6 blades, 1 per motor – Fan speed
2-speed fans – high speed 1,600 rpm
Fan (common to each unit) 2 per cooler – 1067 mm diameter (42 in); 6 blades, 1 per motor – Maximum ambient rating
125.0° F
Oil Cooler – Compressor section size
2540 mm wide × 1778 mm tall (100 in wide × 70 in tall)
Oil Cooler – Hydraulic section size
70.0in
Oil Cooler – Type
Separate cores, stacked

Oil Cooling System (Hydraulic Tank)

Reservoir breather
Atmospheric, filtered breather 10 micron
Reservoir – with sight and temperature gauge
360.0gal

Undercarriage

Brake release
Automatic
Brakes
Spring set, hydraulic release
Final drive
Independent hydrostatic motors
Front
Three-point oscillating type
Gradeability mast down
66%
Maximum drive horsepower per track
360.0hp
Number of rollers on each side
11
Overall length (variable with adjustment)
264.0in
Pad type
Triple grouser
Pad width
35.4in
Rear axle
14.0in
Rock guards
Standard full-length guards
Rollers
Sealed, oil-flooded
Track adjustment means
Hydraulic with grease gun
Track drive disconnect
Standard (manual)
Tram speed maximum
1.3mph
Type
Excavator type
Upper track chain support
Three (3) carrier rollers

Accessories, Tools and Handling Equipment

Adaptor Sub – Bottom thread
Depends on pipe diameter
Adaptor Sub – Diameter
Depends on pipe diameter
Adaptor Sub – Length
36.5in
Adaptor Sub – Top thread (API reg.)
5.5in
Adaptor Sub – Wall thickness
1in
Bit Sub – Bottom thread
Depends on pipe diameter
Bit Sub – Diameter
Depends on pipe diameter
Bit Sub – Top thread
Depends on pipe diameter
Bit Sub – Wall thickness
1in
Deck Wrench – Impact means
Stationary jaw, flats at 15° off axis
Deck Wrench – Location
Drill deck
Deck Wrench – Wrench plate (T1-Steel)
3.0in
Deck Wrench – Wrench positioning
Hydraulic cylinder
Drill Pipe (optional): Diameter – customer specifications
194 mm, 273 mm (7.625 in, 10.75 in)
Drill Pipe (optional): Length – for 16 m mast
45ft
Drill Pipe (optional): Length – for 20 m mast (2 each on starter string)
30ft
Drill Pipe (optional): Threads
Depends on pipe size
Drill Pipe (optional): Wall thickness
1in
HOBO Wrench – Location
Lower left, outside mast
Pipe Rack (inside the mast) – Typical configuration
5-pod pipe carousel for up to 235 mm (9.25 in) outside diameter
Pipe Rack (inside the mast) – Typical configuration
4-pod pipe carousel for 273 mm (10.75 in) outside diameter
HOBO Wrench – Power
Hydraulic cylinders (3)
HOBO Wrench – Support
Mast-mounted
HOBO Wrench – Wrench type
Patented HOBO (Hydraulic Operated Break Out)
Table Bushing
Roller deck bushing
Winch: Auto shut-off
Located in crown, automatically shuts off winch when ball weight is seated
Winch – Brakes
Automatic
Winch: Cable size
0.625in
Winch – Location
Front of mast in mast pivot area
Winch: Rating – Optional
12000lb
Winch: Rating – Rated winch
8000lb
Winch – Safety hook
Swivel-type positive lock

Compressor (Standard)

Air cleaner – Model
SSG 20 (two each)
Air cleaner – Type
Dry-type with safety element
Air shut-off
Hydraulic cylinder-operated from operator’s seat
Controls
Automatic with safety shut-down
Discharge air flow (sea level)
3600.0cfm
Discharge flow maximum setting (sea level)
3600ft3/min
Discharge flow minimum setting (sea level)
Adjustable down to 51 m3/min (Adjustable down to 1,800 ft3/min)
Drive
Direct coupled to engine flywheel
Maximum operating pressure
100.0psi
Oil cooling
Air-to-oil cooler, thermostatically controlled
Oil filtration
12 micron replaceable element
Oil separation
Vertical barrier element, pre-separation in 189 L (50 gal) sump, vertical tank
Type
Oil-flooded, single-stage screw

Operator’s Cab

Climate control
Roof-mounted, AC/heating/pressurizing unit
Construction
12-gauge steel welded to 51 mm (2 in) steel tube
Door latches
Large heavy-duty latches with lockable handles
Floor area
47.3ft2
Height inside
83.5in
Helper’s seat
Full-cushion type, collapsible, stow-away and removable
Insulation, floor
3 mm (0.125 in) pyramid vinyl surface
Left door to drill deck
Swing-type HD hinge
Length at floor
102.0in
Location
Adjacent to the drill deck
Number of doors
Two with 2 (each) windows (included in above)
Number of windows
12
Operator’s seat
One swivel-type with armrests, headrest and retractable seat belt
Right door
Swing-type HD hinge
Roof
Roof viewing hatch with window (protected with FOPS-certified cage)
Sound levels
72 db(A)
Type
One piece, three man; shock-mounted; integrated FOPS certified, fully electrical/electronic
Width at floor
71.75in
Windows
Tinted thermopane glass in rubber mounting

Options

Cold Weather Package – Temperatures to:
-40° F
Dust Collection
The Dry Dust Suppression System uses a fan-wheel arrangement with aggressively pitched fins/vanes.
Dust Collection
These fins/vanes provide 173 m3/min (6,100 ft3/min) air flow & can develop up to 508 mm (20 in) water vacuum at the deck inlet.
Heating and Circulation – Drainage for water-injection system temperatures to:
-40° F
Water Injection
Hydraulic pump and motor arrangement with below-deck tanks 2922 L (772 gal) capacity.

Rated Capacity

16 Meter Configuration – Depth multi-pass
Up to 84.73 m (Up to 278 ft)
16 Meter Configuration – Depth single-pass
Up to 16.15 m (Up to 53 ft)
20 Meter Configuration – Depth multi-pass
Up to 65.58 m (Up to 215 ft 2 in)
20 Meter Configuration – Depth single-pass
Up to 19.86 m (Up to 65 ft 2 in)
Hole diameter
229-381 mm (9-15 in)

Operating Temperature

Altitude
4572 m (over 15,000 ft)
Cold weather option
-40.0° F
Maximum ambient rating – standard unit
125.0° F
Minimum ambient rating – standard unit
-20.0° F

Lubrication System

Type
Automatic lubrication system

Hydraulic System

Accessory Circuit Pump (Open-Loop) – Maximum flow
50.0gal/min
Accessory Circuit Pump (Open-Loop) – Pressure rating
5800.0psi
Accessory Circuit Pump (Open-Loop) – Type
Axial piston, variable volume
Fan Circuit Pumps for Split Coolers (2) – Maximum flow – dual fan
65.0gal/min
Fan Circuit Pumps for Split Coolers (2) – Pressure rating
3500.0psi
Fan Circuit Pumps for Split Coolers (2) – Type
Double gear
Fan Drive Motors for Split Coolers (2) – Pressure rating
6000.0psi
Fan Drive Motors for Split Coolers (2) – Type
Piston
Filtration (all filters have indicators and bypass) – Case return
12 micron
Filtration (all filters have indicators and bypass) – Charge
3 micron 1 per loop
Filtration (all filters have indicators and bypass) – Loop
12 micron 2 per loop
Filtration (all filters have indicators and bypass) – Main return (2 each)
12 micron
Left Track/Rotation Pump (Closed-loop) – Maximum flow
125.0gal/min
Left Track/Rotation Pump (Closed-loop) – Pressure rating
5800.0psi
Left Track/Rotation Pump (Closed-loop) – Type
Axial piston, variable volume
Pump Drive Gearbox – Drive
Rubber coupler/drive shaft to front of engine
Pump Drive Gearbox – Type
4 pad
Right Track/Feed Pump (Closed-Loop) – Maximum flow
125.0gal/min
Right Track/Feed Pump (Closed-Loop) – Pressure rating
4495.0psi
Right Track/Feed Pump (Closed-Loop) – Type
Axial piston, variable volume
Rotation Drive Motors (2) – Pressure rating
5000.0psi
Rotation Drive Motors (2) – Type
Axial, piston
Track Drive Motors (2) – Operating pressure
6000.0psi
Track Drive Motors (2) – Type
Axial, piston

Leveling Jacks

Cylinder bore diameter – Drilling end
8.0in
Cylinder bore diameter – Non-drilling end
7.0in
Cylinder rod diameter – Drilling end
5.0in
Cylinder rod diameter – Non-drilling end
4.0in
Cylinder stroke – Drilling end
48.0in
Cylinder stroke – Non-drilling end
60.0in
Lift capacity – Each drilling end
150796.0lb
Lift capacity – Each non-drilling end
115423.0lb
Location
2 front, 2 rear
Number
4
Pad connection
Ball and socket
Pad diameter
42.0in
Safety check valves
CBVs internal at each cylinder

Mainframe, Decks and Walkways

Construction
Electric-welded plate box design, sculpted to reduce stress
Hand rails – steel tube – Diameter
1.9in
Hand rails – steel tube – Height
48.0in
Jacks, mast pivot and deck
Welded integrally to mainframe
Machine deck
Access all sides
Main rails
Box section construction comprised of top, bottom and vertical plates, and internal stiffeners – made of ASTM Grade 50
Tools and battery box
In-board extra-large toolbox (sunk in drilling deck)
Tow eyes
Welded, two front

Mast

Construction
ASTM 500 grade B rectangular tubing
Hose tray
Bolt-on fabrications, steel lower, aluminum upper
Hydraulic lines
Pressure-rated steel hydraulic tubing
Main chord size – Front
203 mm × 102 mm (8 in × 4 in)
Main chord size – Rear
127 mm × 127 mm (5 in × 5 in)
Mast-Elevating Cylinders – Cylinder bore diameters
216 mm; 184 mm; 152 mm (8.50 in; 7.25 in; 6 in)
Mast-Elevating Cylinders – Cylinder rod
203 mm; 171 mm; 114 mm (8 in; 6.75 in; 4.5 in)
Mast-Elevating Cylinders – Cylinder stroke
161.8in
Mast-Elevating Cylinders – Lift capacity each cylinder
150800.0lb
Mast-Elevating Cylinders – Number of cylinders
2
Pipe rack – Feed cable tensioner
Automatic
Pipe rack – Outside diameter – 4 each
254 mm and 273 mm (10 in and 10.75 in)
Pipe rack – Outside diameter – 5 each
194 mm through 235 mm (7.625 in through 9.25 in)
Pivot and raising area
Rectangular tubing A frame, reinforced in high-stress areas, with 127 mm (5 in) high-strength plate

Pull-down/Hoisting Capacity

Adjustable head guide shoes
Steel with replaceable Nylatron™
Cable sheaves (cylinder) – PD
22.0in
Cable sheaves (top and bottom) – PD
24.0in
Cable type – DYFORM 8
1.125in
Cylinder bore – diameter
8.75in
Cylinder rod – diameter
4.75in
Drilling feed/retract rate
0-37.5 m/min (0-123 ft/min)
Hoist capacity
Up to 383 kN (Up to 86,000 lbf)
Number of cylinders
1
Pull-down capacity
Up to 489 kN (Up to 110,000 lbf)
Sheave guards
Standard at bottom plate
Type
Closed-loop hydraulic (stationary rod, moving barrel)

Drill Table and Work Deck

Deck floor material
Ry-grip non-slip floor plate
Drill deck length – work deck
223.0in
Drill deck width
242.0in
Dust curtain
Hydraulic lifters front and rear
Dust curtain – Material – rubber nylon reinforced
0.25in
Dust curtain – Width
114.0in
Dust reflector
Directly below table bushing
Feature
Wide walkways
Hand rails – steel tube – Diameter
1.9in
Hand rails – steel tube – Height
48.0in
Material
Natural rubber seal
Material – Diameter with hinged retainer
22.0in
Material – Thickness
0.9in
Table height off ground – drill on tracks
73in
Viewing hatch operated from the cab
In the drill deck; hydraulically

Engine (Standard)

Air cleaner – Model
55G 20
Air cleaner – Type
Dry-type with safety element
Batteries
Four (4) each 8-D
Fuel tank
2055 L + 1234 L; total 3289 L (543 gal + 326 gal; total 869 gal)
Full load RPM
1,800
Manufacturer
Detroit Diesel
Model
Series 2000 16V Tier 2
Muffler – Inlet – two
5.0in
Muffler – Outlet – two
6.0in
Rated horsepower
1205hp
Safety shut-down system
Energized to run
Starting system
24V DC, dual starters
Turbo and manifold covers
Blankets, custom-fitted

Operator’s Controls/Gauges

Drill Monitor System
One-touch auto-leveling; one-touch single-pass drilling functions included
Drill Monitor System
Split console controls are configured with touch-screen interface to display drill health and performance
Drill Monitor System
Drill performance and monitoring includes a downloadable memory function
Drill Monitor System
Auto-drill System is fully configurable with any GPS/tracking or fleet management/optimization system with one point of plug-in
Location
Split console at front and side cab wall, placed so controls in operator’s reach while arms resting on seat armrests
Standard Compressor Controls
Low compressor oil pressure, engine shut-down
Standard Compressor Controls
Compressor discharge temperature
Standard Compressor Controls
Full/minimum displacement switch
Standard Compressor Controls
Air pressure gauge
Standard Compressor Controls
High compressor discharge temperature, engine shut-down
Standard Compressor Controls
Compressor start/run control
Standard Drilling Controls: All Electric/Electronic
Compressor controls
Standard Drilling Controls: All Electric/Electronic
Viewing hatch door control
Standard Drilling Controls: All Electric/Electronic
Winch control
Standard Drilling Controls: All Electric/Electronic
Level indicator
Standard Drilling Controls: All Electric/Electronic
Deck wrench control
Standard Drilling Controls: All Electric/Electronic
Dust curtain
Standard Drilling Controls: All Electric/Electronic
Dust/water injection
Standard Drilling Controls: All Electric/Electronic
Pipe rack in/out control
Standard Drilling Controls: All Electric/Electronic
Propel controls
Standard Drilling Controls: All Electric/Electronic
Rotation control
Standard Drilling Controls: All Electric/Electronic
Rod catcher control
Standard Drilling Controls: All Electric/Electronic
Mast lock
Standard Drilling Controls: All Electric/Electronic
Pull-down pressure control
Standard Drilling Controls: All Electric/Electronic
Mast elevation control
Standard Drilling Controls: All Electric/Electronic
HOBO wrench control
Standard Drilling Controls: All Electric/Electronic
Leveling jacks controls
Standard Drilling Controls: All Electric/Electronic
Pull-down control
Standard Engine Controls/Indicators
Tachometer
Standard Engine Controls/Indicators
On/off light switch
Standard Engine Controls/Indicators
Hourmeter
Standard Engine Controls/Indicators
Drill hour
Standard Engine Controls/Indicators
Fuel level
Standard Engine Controls/Indicators
Diagnostic connection
Standard Engine Controls/Indicators
Diagnostic fault and indicator lights
Standard Engine Controls/Indicators
Low-pressure shut-down
Standard Engine Controls/Indicators
Water temperature
Standard Engine Controls/Indicators
Fuel primer
Standard Engine Controls/Indicators
Stop button
Standard Engine Controls/Indicators
Auto shut-down bypass
Standard Engine Controls/Indicators
Oil pressure (electric)
Standard Engine Controls/Indicators
High water temperature shut-down
Standard Engine Controls/Indicators
Electric voltmeter
Standard Engine Controls/Indicators
Start button
Standard Engine Controls/Indicators
Throttle control

Standard Equipment

  • Capability
    • The MD6540 crawler-mounted blasthole drill is designed to drill up to 381 mm (15 in) diameter holes depending on application with rated pulldown capacity up to 49 895 kg (110,000 lb), hoist capacity 39 009 kg (86,000 lb).
  • Engine/compressor
    • Detroit Diesel Series 2000 16V engine 899 kW (1,205 hp) @ 1,800 rpm
    • Additional fuel filtration
    • Single stage Sullair compressor 101.9 m3/min @ 6.9 bar (3,600 ft3/min @ 100 psi) with split coolers
    • Standard spiral valve on compressor allows variable air volume control
  • Mast
    • Up to 381 mm (15 in) hole diameter
    • Up to 49 895 kg (110,000 lb) pulldown capacity
    • Up to 53 845 kg (118,709 lb) bit load
    • Patented HOBO (Hydraulically Operated Break Out) wrench operated from the cab (variable grip)
    • Auto cable tensioning system
    • 30 degree angle drilling package with mast locks in 5 degree increments
    • Grid mesh in back of mast
    • Hydraulically operated pipe catcher
  • Top Drive
    • See Mandatory Selections
  • Operator’s Cab
    • Integrated FOPS
    • Totally enclosed and insulated two-man extra large cab
    • Rubber shock mounted to absorb vibration during drilling
    • Excellent visibility
    • Full front drill deck window with protective cage
    • dB(A) rating of 72 or less
    • Two (2) hinged doors with heavy duty door latching system
    • Twelve (12) windows – with window tint and window shades on five (5) windows
    • 4.4 m2 (47.3 ft2) floor space and walkway/railing around it
    • Ergonomic operator’s console with split control panel and full instrumentation
    • Operator’s console with stainless steel panels and back-lit gauges
    • Ergonomic operator’s seat with head and arm rests, and with retractable seat belt
    • Air suspension
    • All electric controls for drilling, tramming, leveling plus auxiliary functions
    • Auxiliary functions operated by fingertip switches
    • Hydraulic drive, roof mounted air conditioning/heating/pressurizing unit
    • Roof window with protective cage
    • Windshield wipers and washer tank kit
    • Stereo kit (CD, radio, AM/FM and iPod port) complete with speakers
    • Cab ladder and roof platform plus railing
    • Drill performance and monitoring/diagnostics system complete with full interlock system
    • Auto level and single-pass auto drill function/processing
    • Closed circuit camera system (two cameras) with color screen monitor
    • Storage box
    • Electric horn (activated by push button inside the cab)
  • Undercarriage
    • Excavator type heavy duty tracks with planetary drive, integral brake, and cushioned idler
    • 900 mm (35.4 in) wide, triple grousers
    • Full length chain guides/rock guards
  • Mainframe, Decks And Walkways
    • Main frame made of high strength low alloy box-section plate
    • Reinforced in high stress areas
    • Main deck and wide walkways provide easy access to all components around the drill
    • Rear deck is stationary during both angle and vertical drilling modes
    • Viewing hatch in the rear deck, hydraulically operated from the cab
    • Complete walk-around platform/walkway for entire rig
    • Cascading (self leveling) stairs at cab, access ladder at rear deck and two ladders on front deck
    • Four (4) hydraulic leveling jacks – front jacks @ 1524 mm (60 in), rear jacks @ 1219 mm (48 in)
    • Heavy duty tow hooks (front end) and lifting lugs
    • Mast access stair/platform
    • Extra large inboard tool chest/bit box
    • Rear deck pipe loader guide
    • Hydraulically operated front and rear dust curtains
    • Automatic lubrication aystem
    • Fuel tanks under engine (3289 L/869 gal)
    • Jib crane with controls mounted on rear deck
    • Fast fill full service center/box
    • 4 × 8D maintenance free batteries
    • Slide-out battery tray with four (4) batteries
    • Remote jump start terminals
  • Carousel
    • Hydraulically operated from the cab
    • No moveable parts
    • Semi-automatic indexing
  • Cooling (single, Front-end Mounted)
    • Maximum ambient cooling capacity of 52° C (125° F)
    • Variable speed fan arrangement for coolers
  • Hydraulic System
    • Two (2) variable displacement axial piston pumps, in closed loop, which operate the drill rotation, pulldown/hoist and tram.
    • One (1) high pressure piston pump, in load sense, for all auxiliary functions
    • One (1) high pressure tandem gear pump, in open loop, for cooler fans (2 fans per cooler)
    • Dual filtration and additional loop filters between pumps and motors
    • Hydraulic tank capacity 1363 L (360 gal)
  • Drill Accessories (tricone/rotary)
    • Heavy duty shock sub, with top sub adaptor
    • Roller deck bushing
    • Bit sub
    • Horseshoe bushing
    • Bit basket
    • Lifting bail
    • Auto tool wrench (deck wrench)
  • Dust System
    • See Optional Equipment and select the required system
  • Paint
    • Standard Caterpillar colors
  • Miscellaneous
    • Backup alarm
    • Filter kit for 50-hour preventive maintenance.
    • Seventeen (17) LED night lights
    • Handrails with side boarding ladders
    • Outside cab platform for easy access and full walk around

Optional Equipment

  • Drilling
    • Drill pipe (see Drill Pipe Price List)
  • Dust Collection Options
    • 3600 dust collector with precleaner, (tandem model HDE 1800’s in Series)
    • Water injection system for dust suppression with 2922 L (772 gal) below deck tanks not available with dust collector
  • Fluids
    • Drill pipe thread lubrication
  • Cold Weather Aids
    • Heating system (self-contained heater for engine coolant, water, hydraulic oil, fuel)
  • Miscellaneous
    • Luncheonette – microwave/refrigerator
    • Custom paint (contact factory)
    • Winch remote control pendant (control outside cab)
    • 24V to 110 volt AC invertor
    • Remote jump start terminals
    • Mechanical tool kit (reference TV014590)
    • Extreme hot weather lubricant upgrade (compressor oil)
    • Extreme hot weather lubricant upgrade (hydraulic oil)
    • Tow bar assembly
    • Lanyard attachment (cable with travelling hook) on mast
    • Ground level pull cable shut down
    • High pressure wash-down pump with hose reel