D8T Track-Type Tractor

D8T Track-Type Tractor

The Cat D8T dozer has a long history of outstanding versatility, productivity and resale value. Because this bulldozer excels across a wide range of tasks, customers choose the D8T for everything from dozing, ripping, scraper work and land clearing to finish grading. And with features designed for even greater comfort, productivity and fuel efficiency, today’s D8T does even more to help you meet your business objectives.

Download Product Documents

Click a link to download the document:

Performance Features

Save time, save money

Equip your D8T with optional features to help you get more work done in less time and at a lower cost.

Larger Semi-Universal (SU) Blade

  • Move more material per pass for up to 13 percent more productivity.
  • 13.4 yd3 (10.3 m3) – 19 percent more capacity.*

Performance Cutting Edges for SU Blades

  • Patented design moves more material per pass – cutting action loads blade faster, increases blade load mass by up to 25 percent.**
  • Easier blade penetration in hard/frozen ground, moderate rock – reduce ripping in some situations
  • Digs deeper – aids blade control, load retention, traction – reduces track slip, improves undercarriage life.
  • Equal wear life/life cycle cost** – no mid-life edge flip or end bit replacement required.
  • Built-in wear indicators, drilled and tapped holes for easier installation, interchangeable with traditional edges.
  • Versatility – on-plane cutting system allows finish grading.

Powered Bottom Guards

  • Reduce downtime, enhance safety.
  • Hydraulically actuated from remote switch.
  • Center opening for easy clean-out or side opening for full access.

Cat Heavy Duty Extended Life Undercarriage

  • 30 percent more bushing wear life.***
  • Reduced link scalloping – patented crowned Dura Link improves ride after 50 percent link wear.***
  • Matching component life for easier maintenance.
  • Best suited to high abrasion conditions.

COMMAND for Dozing

  • Remote control operation for enhanced safety and greater productivity.
  • Over-the-shoulder operator console provides line-of-sight remote control up to 400 m (437 yd) away.
  • Comfortable remote operator station offers both line-of-sight and non-line-of-sight remote control.

*Compared to Standard SU blade.

**Compared to standard cutting edges.

***Compared to Positive Pin Retention undercarriage.

Power and Performance

Built to get the job done

A Cat C15 ACERT engine gives you the power and reliability you need to get the job done. Fuel economy, plus efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.

Differential Steering

Differential Steering maintains full power to both tracks for best-in-class turning, even with a full blade load. When one track speeds up, the other slows down an equal amount, so you have better maneuverability and faster cycle times. You also get better load capacity, power and speed control in soft conditions because both tracks are powered during turns.

Load Sensing Hydraulics

Field-proven load-sensing hydraulics continuously adjust hydraulic power based on load to maximize your work tool. Independent hydraulic pumps ensure no sacrifice in performance when steering and controlling blade simultaneously.

Torque Divider

A single stage torque divider sends 70 percent of engine torque through a converter and the other 30 percent through a direct drive shaft so you get more power to the ground, more efficiently.

Cooling System

The radiator, Air To Air Aftercooler (ATAAC) and hydraulic oil cooler are packaged in a single plane, making cleanout easier. Durable, aluminum bar plate construction gives you superior heat transfer and corrosion resistance. Six fins per inch on the standard core allow debris to pass through and help reduce plugging.

In cooler conditions, the hydraulic demand fan reduces speed to conserve power, save fuel and decrease sound levels. An optional reversing fan is available for high debris conditions.

Advanced Productivity Electronic Control System (APECS)

The Planetary Power Shift Transmission uses integrated electronic controls to automatically modify shift points based on load and operating conditions. The result is smoother shifting overall, as well as greater benefits from Enhanced Auto Shift.

Enhanced Auto Shift

Enhanced Auto Shift is a standard feature that allows your operator to select the optimum ground speed for the job. It also helps you save fuel by automatically choosing the most efficient gear based on load.

Selectable Electro-Hydraulic Maps

Customizable E-H maps allow you to set the implement response/speed levels to match operator preferences and tailor the machine to individual applications.

Operator Environment

Comfort and productivity

The latest D8T offers operators added comforts like a quieter cab, adjustable armrests and a heated/ventilated seat option. A seat belt indicator light helps remind you to work more safely.

A color touch-screen display puts the machine’s programmable control features right at your fingertips. Control exterior lighting, activate the reversing fan and set productivity features like Autocarry™, Auto Rip and Enhanced Auto Shift. You can also access machine performance settings, diagnostics and much more. For complete information about functions and programming, please see the D8T Operation and Maintenance Manual.

Implement and Steering Controls

  • A single ergonomic handle with a thumb roller controls direction, turning, forward/reverse shifting and gear selection. Tiller style control helps you work more precisely in tight spaces.
  • Low-effort dozer lever with electro-hydraulic controls helps you work more comfortably and get precise work tool control. When equipped, single-handle convenience also controls functions like AccuGrade and Dual Tilt.
  • A ripper control with rigidly mounted hand grip provides firm support for the operator even when ripping in the roughest terrain.
  • Implement Lock-Out prevents inadvertent operation of hydraulic attachments when activated by the operator or automatically when the operator is not present.

Emissions Technology

Proven, integrated solutions

Emissions reduction technology on the D8T is designed to be transparent, with no action required from the operator. Regeneration runs automatically in the background while you work.

Diesel Exhaust Fluid

Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently refilled when you refuel. A gauge on the dash shows your fluid level. The D8T offers excellent fluid efficiency. Across a variety of applications, the D8T typically has used DEF at a rate of 2-3 percent of fuel consumption.

When the machine is turned off, a pump will automatically purge the DEF lines to help prevent the fluid from freezing in the lines and pump. A symbol on the dash and a light/symbol on the Ground Level Service Center indicate when the purge is complete and that it is safe to turn off the electrical disconnect. If the engine/aftertreatment temperatures are high, a delayed engine shutdown will activate automatically to cool the machine and then purge the lines. For complete aftertreatment information, please refer to your machine’s Operation and Maintenance Manual.

Cat Connect Technologies

Monitor, manage, enhance job site operations

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology equipped machines, you’ll get more information and insight into your equipment and operations than ever before.

Cat Connect services are also available from your dealership including:

Equipment Management – increase uptime and reduce operating costs.

Productivity – monitor production and manage job site efficiency.

Safety – enhance job site awareness to keep your people and equipment safe.

GRADE for Dozers

Cat Connect GRADE technologies help you hit target grade faster and more accurately. Finish jobs in fewer passes, and with less operator effort, saving you time and helping you increase profit.

Cat Slope Indicate (Standard) – displays machine cross-slope and fore/aft orientation, helping operators work more accurately on slopes.

Cat Grade with 3D (Optional) – factory-integrated grade control system that enables operators to improve grading efficiency, accuracy and productivity. The system automates blade movements in both fine grading and production dozing applications, reducing manual operator inputs by as much as 80 percent.

Integrated design moves the antennas to the top of the cab, eliminating masts and cables traditionally on the blade. 3D mapping of blade and tracks reduces the need for grade checkers and staking, enhances safety and reduces labor costs.

Cat AccuGrade (Optional) – dealer-installed aftermarket grade control system provides higher accuracy capabilities by adding laser, GPS and UTS technology when required. Factory AccuGrade Ready Option provides optimal mounting locations, brackets, and hardware and simplifies installation.

Auto Blade Assist (Optional) – increases efficiency while reducing operator workload. ABA makes use of preset blade pitch positions for the load, carry, and spread portions of the cycle.

AutoCarry (Optional) – automates blade lift to maintain desired blade load, improve load consistency, and reduce track slip. Works seamlessly with GRADE with 3D.

Automatic Ripper Control (Optional) – automatically controls ripper height to limit track slip in hard ripping applications.

COMMAND for Dozing

When dozers work in hazardous mining and earthmoving applications, remote control dozing helps improve safety and efficiency by taking operators off of their machines and letting them work from either nearby or remote locations. Optional COMMAND for Dozing is deeply integrated with Cat machine systems to enable smooth, precise control for maximum efficiency and productivity.

  • Over-the-shoulder operator console provides line-of-sight remote control operation from up to 400 meters (437 yd) away.
  • Comfortable remote operator station offers both line-of-sight and non-line-of-sight remote control.

LINK Technologies

LINK technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink® software.

Product Link™/VisionLink

Product Link takes the guesswork out of equipment management. Track location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink interface. Manage your fleet in real time so you can maximize efficiency, improve productivity, and lower operating costs.

Equipped for the Job

Tough from the inside out

Bulldozers

High tensile strength steel, with a strong box-section design, stands up to the most severe applications. Heavy moldboard construction and hardened bolt-on cutting edges and end bits add strength and durability. Optional rock guards and standard deflector shields help protect cylinders.

The Tag-Link brings the blade closer to the machine for precision, lateral stability and constant breakout force, regardless of the blade height.

Optional Dual Tilt improves load control and allows the operator to optimize the blade pitch angle for better balance and productivity. Tilt the blade forward for better penetration, then tilt back to increase carrying capacity. Auto Blade Assist is standard with Dual Tilt to increase efficiency and reduce operator workload.

Blades and Performance Cutting Edges

High-Capacity Universal, Semi-Universal (SU) and Angle Blades are available, as well as special blades for coal and woodchip stockpile applications. A new, larger SU blade option offers 19 percent more capacity (10.3 m3/13.4 yd3) to help you move more material per pass.

The new blade features patented Performance Cutting Edges designed to help you work faster in hard/frozen ground or in moderately rocky applications. The cutting action increases blade load mass to move more material per pass. Blade control, load retention and traction are improved. The dozer digs deeper and ripping may be reduced in some situations.

Performance Cutting Edges are interchangeable with traditional cutting edges, and offer the same wear life/life cycle cost without the need to flip. For added versatility, the plane of the end bits enables finish grading.

Undercarriage

The D8T is built on a tough mainframe designed to absorb high impact shock loads and twisting forces. A fully suspended undercarriage provides more ground contact, especially in hard, uneven terrain. Greater traction means less slippage, better balance and a smoother ride. The elevated sprocket design helps protect major components from harsh impacts and provides a modular design that is convenient to service.

Heavy Duty undercarriage is standard and is well suited to aggressive applications like land clearing, side-slopes, or working in rocky or uneven terrain.

New, optional Cat Heavy Duty Extended Life Undercarriage is designed to help reduce your costs with heavier bushings for up to 30 percent more wear life. Patented crowned Dura Link is hardened for longer life and reduced scalloping, which improves ride after 50 percent link wear. The Extended Life Undercarriage is best suited to high abrasion conditions and features matching component wear life for easier maintenance.*

Rear Implements

To help match your dozer to the task at hand, you can outfit your D8T with a single-shank ripper, multi-shank ripper, winch, drawbar or rear counterweights. Ask your Cat dealer for available options to help you optimize your machine for the work you do.

*Comparisons to Positive Pin Retention undercarriage.

Special Arrangements

Purpose-built for performance

D8T WH Waste Handler

Whether building or closing cells, pushing trash or spreading cover, the D8T WH is designed and built from the frame up to take on the unique challenges of landfill work.

  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  • Insulated Clean Emissions Module and thermal shields provide a high level of thermal protection.
  • Bottom and Final Drive guarding help prevent debris from wrapping around or damaging vital components.
  • Faster cleanout and enhanced safety with new optional Powered Bottom Guards.
  • The cooling system is designed for high debris environments, with easy access for cleanout.
  • Lights are mounted up and away from main debris area for protection, while still shining plenty of light on the work area.
  • Specialized air handling features help deliver cleaner air to the machine and to the cab.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.

D8T Stockpile Machine

  • Specialized guarding and seals help protect the machine from damage and debris build-up.
  • Faster cleanout and enhanced safety with new optional Powered Bottom Guards.
  • Insulated Clean Emissions Module and thermal shields provide a high level of thermal protection.
  • The cooling system is designed for high debris environments, with easy access for cleanout.
  • Additional features like a screened precleaner and roof-mounted filter help protect both the machine and the operator in high debris conditions.
  • Special woodchip and coal blades, along with specialized track shoes, let you outfit the machine for the job.

Sustainability

Built for the next generation

  • The D8T meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards.
  • Improved fuel economy over the previous model and efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.
  • Features like Enhanced Auto Shift and a hydraulic demand fan help you save even more fuel, as well as wear and tear on equipment.
  • Technologies like AccuGrade, Cat Grade with 3D and Product Link contribute even more to helping you save on fuel costs.
  • Major components are built to be rebuilt, eliminating waste and saving you money by giving your dozer a second – and even third – life.

Safety

Designed with protection in mind

  • New optional Powered Bottom Guards enhance safety during clean-out.
  • A rear vision camera and cylinder mounted mirrors are available to enhance visibility around the machine.
  • Convenient steps, handles and guardrail help you get on and off the tractor with greater ease. Access lighting can be turned on from a ground level switch.
  • New seat belt indicator enhances safety by reminding the operator to buckle up with a light/alarm. Once the machine is in gear, a fault code will register through Product Link if the operator fails to fasten the seat belt.
  • Electronic fluid level verification at startup for coolant, power train and engine oil means you can make fewer trips up and down from the cab.
  • A standard Operator Presence detection system allows the machine to idle when the operator is not seated, but locks out the power train and front implements to avoid unintentional movement.

Serviceability and Customer Support

When uptime counts

Ease of Service

The D8T is designed to help you get routine service done quickly and efficiently so you can get to work. The D8T offers full left-side engine serviceability, including fill tube, dipstick, air cleaner, fuel filters, oil filter and coolant level check. Easy cooling system access helps with faster inspection and cleaning. An optional high speed oil change attachment can make servicing even faster.

New optional Powered Bottom Guards help reduce downtime for maintenance and enhance safety. Doors are hydraulically actuated from a remote switch. Simply remove bolts and doors can be opened from the center for quick clean-out, or from one side for full access.

Major components like the engine, transmission and final drives are modular so they can be more quickly removed for service, saving you cost and downtime. The Ground Level Service Center gives you quick, easy access to the hour meter, battery disconnect, secondary engine shutdown, DEF purge indicator and light switch.

Cat EMSolutions (Equipment Management Solutions)

EMSolutions lets you take control of your fleet with a solution specific to your equipment management needs.

Comprehensive, technology-enabled equipment management – combined with the knowledge and expertise of your Cat dealer – can provide ways to help you achieve gains that go straight to your bottom line.

  • Improve availability
  • Reduce owning and operating costs
  • Streamline maintenance practices
  • Maximize equipment life
  • Increase resale value

Consisting of five levels of support, from remote access to equipment data to complete, proactive management of your fleet, EMSolutions allows you to choose the amount of support that’s right for you.

Renowned Cat Dealer Support

Knowledgeable Cat dealers have a global reputation for providing outstanding sales and service. Maximize your equipment investment with a Customer Support Agreement tailored to meet your business needs. Take advantage of preventive maintenance programs like Custom Track Service, Scheduled Oil Sampling (S·O·SSM) analysis, and guaranteed maintenance contracts. Cat dealers can even help you with operator training to help boost your profits.

When you need repairs, Cat dealers and our unmatched Caterpillar distribution network excel at getting you the right parts you need quickly.

Your Cat dealer can also help you maximize your equipment investment with services like Cat Reman parts and Cat Certified Rebuilds. Remanufactured parts offer you the same warranty and reliability as new parts at a fraction of the cost. A Certified Rebuild gives a “second life” for your machine, incorporating the latest engineering updates so you end up with a like-new track loader and a new machine warranty. Caterpillar strives to provide customers the lowest owning and operating costs over the life of their machine.

Engine

Engine Model
Cat® C15 ACERT™
Flywheel Power
312.0hp
Bore
5.4in
Stroke
6.75in
Displacement
928in3
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
Engine Power (Maximum) – ISO 14396
359hp
Engine Power (Maximum) – ISO 14396 (DIN)
364hp
Engine Power (Maximum) – SAE J1995
363hp
Net Power (Maximum) - ISO 9249/SAE J1349
335.0hp
Net Power (Maximum) - ISO 9249/SAE J1349 (DIN)
343hp
Net Power (Rated) – ISO 9249/SAE J1349
312hp
Net Power (Rated) – ISO 9249/SAE J1349 (DIN)
317hp
Engine Power – 1,700 rpm: SAE J1995
363hp
Engine Power – 1,700 rpm: ISO 14396
359hp
Engine Power – 1,700 rpm: ISO 14396 (DIN)
364hp
Net Power – 1,900 rpm: ISO 9249/SAE J1349
312hp
Net Power – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
317hp
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
Note
No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs.
Note
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel fuel (ULSD, containing 15 ppm [mg/kg] sulfur or less). Biodiesel blends up to B20 (20% blend by volume) are acceptab
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Weights

Operating Weight
86900lb
Operating Weight – LGP
82496lb
Operating Weight – Standard
86900lb
Shipping Weight – LGP
68700lb
Shipping Weight – Standard SU Blade
66300lb
Note
Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator.
Note
Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, 965 mm (38 in) MS shoes, and operator.
Note
Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes.
Note
Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 965 mm (38 in) MS shoes.

Transmission

1 Forward
2.1mph
2 Forward
3.8mph
3 Forward
6.6mph
1 Reverse
2.8mph
2 Reverse
5.0mph
3 Reverse
8.8mph
Drawbar Pull – 1 Forward
148.0lbf
Drawbar Pull – 2 Forward
81.0lbf
Drawbar Pull – 3 Forward
44.0lbf

Service Refill Capacities

Fuel Tank
165.0gal
Cooling System
22.7gal
Engine Crankcase*
10.0gal
Power Train
41.0gal
Final Drives (each)
3.3gal
Roller Frames (each)
17.2gal
Pivot Shaft Compartment
10.6gal
DEF Tank
6.3gal
Hydraulic Tank
19.8gal
Note
*With oil filter

Hydraulic Controls

Pump Type
Piston-type, Variable Displacement
Pump Output (Steering)
75.0gal/min
Pump Output (Implement)
64.0gal/min
Tilt Cylinder Rod End Flow
35.0gal/min
Tilt Cylinder Head End Flow
45.0gal/min
Bulldozer Relief Valve Setting
3480.0psi
Tilt Cylinder Relief Valve Setting
3480.0psi
Ripper (Lift) Relief Valve Setting
3480.0psi
Ripper (Pitch) Relief Valve Setting
3480.0psi
Steering
5700.0psi
Note
Steering Pump output measured at 2,364 rpm (pump speed) and 30 000 kPa (4,351 psi).
Note
Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note
Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves.
Note
Complete system consists of pump, tank, filter, oil cooler, valves, lines, and control levers.

Winches

Winch Model
PA 140OVS
Weight*
3947.0lb
Oil Capacity
4.0gal
Increased Tractor Length
22.2in
Winch Case Width
45.6in
Drum Width
12.6in
Flange Diameter
18.0in
Cable Ferrule Sizes – Length
2.76in
Cable Ferrule Sizes – Outside Diameter
2.36in
Drum Capacity – Optional Cable
193.0ft
Drum Capacity – Recommended Cable Size
276.0ft
Note
*Weight: Includes pump and operator controls.
Optimal Cable Size
1.25in
Recommended Cable Size
1.13in
Winch Length
56.3in
Note
Variable speed, hydraulically driven, dual braking system, three roller fairlead.

Standards

FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II.
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Brakes
Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008.
Note
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engin
Note
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when th
Note
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “European Union Directives” – The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate.
Note
The declared dynamic operator sound pressure level is 75 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engin
Note
The declared exterior sound power level is 113 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008.” The measurement was conducted at 70% of the maximum engine cooling fan speed

Undercarriage – LGP

Ground Clearance
24.1in
Ground Contact Area
9593.0in2
Ground Pressure (ISO 16754)
7.7psi
Grouser Height
3.1in
Length of Track on Ground
126.0in
Pitch
8.5in
Shoe Type
Moderate Service
Shoes/Side
44
Track Gauge
92.0in
Track Rollers per Side
8
Width of Shoe
38.0in

Operating Weights

LGP
82496lb
Standard
86900lb

Blades – 8SU (Version 1)

Capacity (SAE J1265)
11.3yd3
Width (over end bits)
12.9ft
Height
5.5ft
Digging Depth
22.6in
Ground Clearance
50.7in
Maximum Tilt
35.1in
Weight* (without hydraulic controls)
10100lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
86900lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades – 8SU (Version 2)

Capacity (SAE J1265)
13.4yd3
Width (over end bits)
13.3ft
Height
5.7ft
Digging Depth
22.8in
Ground Clearance
48.7in
Maximum Tilt
36.0in
Weight* (without hydraulic controls)
10557lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
86900lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades – 8U

Capacity (SAE J1265)
15.4yd3
Width (over end bits)
13.9ft
Height
5.7ft
Digging Depth
22.3in
Ground Clearance
48.8in
Maximum Tilt
39.2in
Weight* (without hydraulic controls)
11500lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
88300lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades – 8A

Capacity (SAE J1265)
6.8yd3
Width (over end bits)
16.6ft
Height
3.9ft
Digging Depth
24.6in
Ground Clearance
52.1in
Maximum Tilt
28.9in
Weight* (without hydraulic controls)
11900lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
88700lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Undercarriage – Standard

Ground Clearance
24.1in
Ground Contact Area
6060.0in2
Ground Pressure (ISO 16754)
13.0psi
Grouser Height
3.1in
Length of Track on Ground
126.0in
Pitch
8.5in
Shoe Type
Moderate Service
Shoes/Side
44
Track Gauge
82.0in
Track Rollers per Side
8
Width of Shoe
24.0in

Ripper – Single-Shank, Adjustable Parallelogram

Number of Pockets
1
Maximum Clearance Raised (under tip, pinned in bottom hole)
25in
Maximum Penetration (standard tip)
44.4in
Maximum Penetration Force (shank vertical)
28620lb
Pry out Force
50070lb
Weight* (without hydraulic controls)
8705lb
Total Operating Weight* (with SU-Blade and Ripper)
86900lb
Note
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Ripper – Multi-Shank, Adjustable Parallelogram

Number of Pockets
3
Overall Beam Width
97in
Maximum Clearance Raised (under tip, pinned in bottom hole)
23.35in
Maximum Penetration (standard tip)
30.7in
Maximum Penetration Force (shank vertical)
27920lb
Pry out Force (Multi-Shank Ripper with one tooth)
51230lb
Weight – With One Shank
8681lb
Weight – Each Additional Shank
732lb
Total Operating Weight* (with SU-Blade and Ripper)
86876lb
Note
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Weights – Waste Handler

Operating Weight – Standard
86710lb
Operating Weight – LGP
91600lb
Shipping Weight – Standard
73400lb
Shipping Weight – LGP
77900lb
Note
Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, striker box, 610 mm (24 in) MS shoes, and operator.
Note
Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, 965 mm (38 in) MS shoes, striker box, and operator.
Note
Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 610 mm (24 in) MS shoes.
Note
Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 965 mm (38 in) MS shoes.

Blades – 8SU LGP

Capacity (SAE J1265)
12.9yd3
Width (over end bits)
14.9ft
Height
5.3ft
Digging Depth
20.2in
Ground Clearance
51.5in
Maximum Tilt
35.7in
Weight* (without hydraulic controls)
11150lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
82496lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades – 8 SU Landfill

Capacity (SAE J1265)
25.6yd3
Width (over end bits)
12.9ft
Height
8.1ft
Digging Depth
22.6in
Ground Clearance
50.7in
Maximum Tilt
35.1in
Weight* (without hydraulic controls)
7867lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
88800lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades – 8U Landfill

Capacity (SAE J1265)
27.7yd3
Width (over end bits)
13.9ft
Height
8.3ft
Digging Depth
22.3in
Ground Clearance
48.8in
Maximum Tilt
39.2in
Weight* (without hydraulic controls)
9450lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
90383lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades – 8 SU LGP Landfill

Capacity (SAE J1265)
28.9yd3
Width (over end bits)
14.9ft
Height
7.9ft
Digging Depth
20.2in
Ground Clearance
51.5in
Maximum Tilt
35.7in
Weight* (without hydraulic controls)
7734lb
Total Operating Weight** (with Blade and Single-Shank Ripper)
83635lb
Note
*Includes blade tilt cylinder.
Note
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Standard Equipment

  • Power Train
    • C15 ACERT Diesel Engine: – Electronic Unit Injection (EUI) – Aftertreatment – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • 24V electric start
    • High performance single plane cooling system
    • Aftercooler, air-to-air (ATAAC)
    • Air filter, with electronic service indicator
    • Coolant, extended life
    • Fan, suction, hydraulically driven
    • Fuel priming pump, electric
    • Sound attenuated exhaust system
    • Parking brake, electronic
    • Precleaner, strata-tube dust ejector
    • Prescreener
    • Shift management: – Automatic directional and downshift – Controlled-throttle, load-compensated – Enhanced Auto Shift
    • Starting aid, automatic ether
    • Torque divider
    • Transmission, electronically-controlled powershift, 3F/3R speed
    • Four planet, double-reduction planetary final drives
    • Transmission control module, electronic
    • Turbocharger
    • Water separator
  • Undercarriage
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage
    • 8-roller tubular track roller frame (Carrier roller ready)
    • Track adjusters, hydraulic
    • Track guide
    • 610 mm (24 in) PPR moderate service grouser with sealed and lubricated track (44 section)
    • Two-piece master links
  • Hydraulics
    • Hydraulics, independent steering and work tool pumps
    • Hydraulics, electronically controlled, load-sensing dozer lift and tilt
    • Electronically enabled quick drop valve
  • Starters, Batteries, And Alternators
    • Alternator, 150 amp
    • Batteries, heavy duty
    • Starting receptacle, auxiliary
  • Electrical
    • Alarm, back-up
    • Converter, 24V to 12V
    • Diagnostic connector
    • Ground level service center with hour meter
    • Horn, forward warning
  • Operator Environment
    • ROPS mounted air conditioner
    • Armrest, adjustable
    • Advisor operator interface: – Electronic monitoring system – Diagnostic service information – Operator preferences
    • Cab, ROPS/FOPS, sound suppressed
    • Deactivation switch, hydraulic controls
    • Access/egress lighting with shutdown timer
    • Decelerator pedal
    • Governor switch, electronic
    • Heater and ventilation
    • Mirror, rearview
    • Radio-ready
    • Provision for wire passage in/out of cab
    • Interior LED courtesy lights
    • Seat, cloth, air-suspension
    • Seat belt, retractable
    • Steering control, direction and speed control thumb switches with recall button
    • Wipers, intermittent
  • Other Standard Equipment
    • CD ROM Parts Book
    • Engine enclosures
    • Equalizer bar, pinned
    • Front pull device
    • Guards, bottom hinged
    • Grade control ready
    • HVAC box – corrosive resistant
    • Mounting, lift cylinders
    • Oil cooler, hydraulic
    • Product Link
    • S·O·S sampling ports
    • Steering, electronically controlled power differential
    • Vandalism protection for fluid compartments
    • Engine compartment service light
    • Six lights package

Optional Equipment

  • Electrical
    • Light, warning strobe
    • Mount, light, warning strobe
  • Guards
    • Guard, fuel tank
    • Guard, fast fuel
    • Guard, fan debris
    • Guard, grill debris
    • Sweeps group
    • Striker bars, front
    • Striker bars, front, suspended
    • Rear screen
  • Other Attachments
    • Drains, ecology, power train
    • Fan speed, low, cold weather
    • Grab handles, push arm
    • Counterweight, additional
    • Black paint, blade
    • Window shades
    • PA140VS winch
    • W12 E PTO winch
  • Lift Cylinders
    • Basic
    • GRADE with 3D
    • AutoCarry
  • Bulldozers
    • 8SU/U – basic, guarded or dual tilt guarded
    • 8SU LGP – basic
    • 8 LGP – single tilt guarded or dual tilt guarded
    • 8A
  • Push Arms
    • Single tilt, standard or extreme
    • Dual tilt, standard or extreme
  • Ripper Shank Teeth
    • Multi-shank
    • Single shank
    • Single shank, deep ripping
  • Blades
    • 8SU (10.3 m3/13.4 yd3): – With performance cutting edges and end bits – With performance cutting edges and end bits, plus rock guard and wear plate
    • 8SU – basic: – With rock guard and wear plate – With push plate – With landfill wear plate – LGP – LGP landfill
    • 8U – basic: – With rock guard and wear plate – With landfill wear plate
    • 8A