D7E Track-Type Tractor

D7E Track-Type Tractor

Since the introduction of the D7E dozer, customers worldwide have saved millions of liters/gallons of diesel fuel and reduced overall emissions.* The D7E features an innovative diesel-electric power train that helps you save money by getting more work done while using significantly less fuel. Electric drive gives you the power you need for dozing, along with the smooth operation and agile maneuverability suited to a wide variety of applications. The new D7E meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. *Compared to the D7R2.

Download Product Documents

Click a link to download the document:

Power and Performance

Built to get the job done with less

Note: Productivity, efficiency and owning/operating cost compared to previous D7R2 model.

Electric Drive

A revolutionary Electric Drive system is designed to deliver quantum leaps in improved productivity and fuel efficiency. The D7E is up to 30 percent more fuel efficient than the D7R2. Better fuel economy plus greater productivity means you can move up to 35 percent more material per gallon/liter of fuel. And the D7E is more productive – moving 10 percent more material per hour. Fewer moving parts, less fuel and fluid and longer service intervals help reduce lifetime owning and operating costs.

Advanced Electronics Control the Power

Electric generator, power inverter and propulsion module replace traditional components like a torque converter and transmission. A Cat C9.3 ACERT engine turns a powerful electric generator that efficiently converts mechanical energy into AC electrical current.

Electric Propulsion Powers the Final Drives

Current from the generator flows through specially armored cables and military grade connectors to a solid-state power inverter. Advanced electronics send AC current to the propulsion module to control the motors and provides DC current for the accessory systems. The propulsion module, featuring state-of‑the-art AC electric motors, delivers well-modulated torque via axles to the final drives.

Fully Sealed and Liquid Cooled

Drive train electrical components are fully sealed, so the D7E can safely operate in a wide range of dozing conditions. Liquid cooling ensures that the electric drive components deliver peak performance in extreme-temperature conditions.

Powerful Maneuverability

Differential steering combines with electric drive to make the D7E so maneuverable that it can perform both uninterrupted power turns under load and “locked-track” pivot turns. A dedicated D8‑size steering pump delivers improved performance. The electric drive system is highly efficient at delivering engine power to the ground, and an infinitely variable speed control means smooth operations with no gears to shift.

Cooling System

The D7E uses a three-part, aluminum bar core radiator for charged air, jacket water and the separate circuit. The single-plane design allows for easier cleaning and a 6-fins-per-inch design helps reduce plugging. A molded shroud ensures efficient air flow and the fan utilizes lightweight, durable blades for high efficiency and quiet operation. In cooler conditions, the hydraulic demand fan reduces speed to conserve power, save fuel and decrease sound levels. An optional reversing fan is available for high debris conditions.

Traction Control

New standard feature reduces track slip for improved productivity and reduced undercarriage wear.

Stable Blade Control

Standard Stable Blade Control complements operator input to automatically make instantaneous adjustments for smoother grading results with less effort.

Economy Mode

When in use, Economy Mode automatically adjusts engine speed when machine is not under load to save you fuel. The operator’s selected machine speed is maintained.

Load Sensing Hydraulics

Field-proven system senses the load and continuously adjusts hydraulic power to maximize your work tool efficiency.

Operator Environment

Comfort and productivity

The D7E features a quiet, spacious cab. The center-post design gives you outstanding visibility all around the machine to help operators work more confidently and safely. Operators can also enjoy added comforts like manually adjustable armrests and a heated/ventilated seat option. The in-dash display monitors machine conditions in real time. Mount a grade control system display in the dash to put working information conveniently in front of the operator. A new in-cab main fall/cross slope display shows you real-time grade percentage during slope work. A single-unit cab-mounted heating, ventilation and air conditioning (HVAC) system is self contained and powered by the accessory power converter for more efficient cooling.

Implement and Steering Controls

  • Ergonomic controls are fully adjustable and designed for low-effort comfort. Switches and controls for various systems are located within easy reach of the operator.
  • Speed recall feature allows operators to pre-set the desired forward and reverse travel speed, and then resume that speed simply by pressing a button.
  • Implement Lock-Out prevents inadvertent operation of hydraulic attachments.

Emissions Technology

Proven, integrated solutions

Emissions reduction technology on the D7E is designed to be transparent, with no action required from the operator. Regeneration runs automatically in the background while you work.

Aftertreatment Technologies

Caterpillar designed earlier models with Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) standards in mind. To meet the additional 80 percent reduction in NOx emissions, Caterpillar engineers added Selective Catalytic Reduction (SCR) to the already proven aftertreatment solution.

Diesel Exhaust Fluid

Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently refilled when you refuel. A gauge on the dash shows your fluid level. The D7E offers excellent fluid efficiency. Across a variety of applications, the D7E typically has used DEF at a rate of 2-2.5 percent of fuel consumption. When the machine is turned off, a pump will automatically purge the DEF lines to help prevent freezing. A symbol on the dash and a light/symbol on the Ground Level Service Center indicate when the purge is complete and that it is safe to turn off the electrical disconnect. If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines. For complete aftertreatment information, please refer to your machine’s Operation and Maintenance Manual.

Integrated Technologies

Monitor, manage and enhance job site operations

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology equipped machines, you’ll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management – increase uptime and reduce operating costs. Productivity – monitor production and manage job site efficiency. Safety – enhance job site awareness to keep your people and equipment safe. Featured Cat Connect technologies include:

LINK Technologies

LINK technologies wirelessly connect you to your equipment giving you access to essential information you need to know to run your business. LINK data can give you valuable insight into how your machine or fleet is performing so you can make timely, fact-based decisions that can boost job site efficiency and productivity.

Product Link/VisionLink

Product Link is deeply integrated into your machine, helping you take the guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface can help you effectively manage your fleet and lower operating costs.

GRADE Technologies

GRADE technologies combine digital design data, in-cab guidance, and automatic controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.

Cat AccuGrade

AccuGrade is a dealer-installed aftermarket grade control system that provides higher accuracy capabilities by adding laser, GPS and UTS technology when required. The factory AccuGrade Ready Option provides optimal mounting locations, brackets, and hardware and simplifies installation. Deep Integration optimizes machine and system performance to maximize productivity.

Equipped for the Job

Optimize your machine

The D7E features a robust, single lift cylinder design. L-shaped push arms give you an advantage over diagonal brace designs by bringing the blade closer to the machine. This gives you better balance, stability, maneuverability and blade penetration.

Blades

Semi-Universal, Universal, Straight and Angle blades are designed with a strong box section to stand up to the most severe applications. Heavy moldboard construction, hardened bolt-on cutting edges and end bits add strength and durability. Dual Tilt option is available on S/SU/U blades for more productive dozing. Specialty blades are also available for waste, coal and wood chip applications.

Undercarriage

The D7E undercarriage is designed for performance in a wide range of applications. Enhanced visibility, especially to the sides, is only one of the many benefits of this highly efficient undercarriage system. D10-size sprocket bearings offer added durability. Shock loads are directed through the roller frame to reduce wear and tear on the machine – and on the operator. The Heavy Duty undercarriage components are designed for extended wear life in abrasive conditions and rocky or uneven terrain. Choose a Standard arrangement for versatility in a variety of soil conditions, or the Low Ground Pressure (LGP) configuration with increased track contact area for improved stability and excellent flotation in soft ground conditions.

Rear Implements

To help you match your dozer to the task at hand, you can outfit your D7E with a multi-shank ripper, winch, drawbar or rear counterweight. Ask your Cat dealer for available options to help you optimize your machine for the work you do.

Special Arrangements

Purpose-built for performance

The D7E is especially popular in Waste and Stockpile applications because of its maneuverability and demonstrated fuel efficiency advantages. Equip your purpose-built machine from the factory to handle the unique challenges of landfill, coal and wood chip work. Special blades and track shoe offerings let you optimize the machine for the job.

D7E WH LGP Waste Handler

  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  • Purpose-built heavy duty final drive guarding help prevent wire, cables, rope and debris from wrapping into the final drive seals.
  • Heavy duty sealed bottom guards protect the engine and power train system.
  • Reversing fan and single plane cooling cores with 6 fins per inch are ideal for high debris environments. Easy access clean out.
  • Insulated Clean Emissions Module for thermal protection.
  • Lights are mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.
  • Specialized air handling features help deliver cleaner air to the machine and to the cab.

D7E Stockpile

  • Specialized guarding and seals help protect the machine from damage and debris build-up.
  • Single-plane cooling package for cooling efficiency, reduced plugging and easier clean-out. Hydraulic demand fan offers efficient cooling and reverses to reject debris.
  • Insulated Clean Emissions Module and thermal shields.
  • Additional features like a turbine precleaner and roof-mounted filter help protect both the machine and the operator in high debris conditions.

Serviceability and Customer Support

When uptime counts

Ease of Service

The D7E redefines serviceability. With easy access to service points, fewer moving parts and longer service intervals, the D7E can significantly reduce total owning and operating costs. A tilt cab allows easy access to modular major components, such as generator, propulsion module, power electronics and hydraulics. The heating, ventilation and air conditioning (HVAC) system is self contained for improved performance, increased service intervals and ease of serviceability. Service points are grouped on the left side of the machine for quick and easy routine maintenance. Ground-level sight gauges let you inspect fluid levels at a glance. Modular final drives can be easily accessed for maintenance. The optional high-speed oil change attachment can help make servicing even faster. And for quick undercarriage cleanouts on the go, a new shovel mounting bracket has been added to the back of the machine.

Ground Level Service Center

You can reach the ground level service center on the left fender without setting foot on the machine, giving easy access to the battery disconnect, hour meter, remote engine shutdown and access light switches. It also houses an LED warning indicator showing that the power train and accessory systems are energized. When the systems are de‑energized and safe for maintenance, the indicator turns off.

Cat EMSolutions (Equipment Management Solutions)

EMSolutions lets you take control of your fleet with a solution specific to your equipment management needs. Comprehensive, technology-enabled equipment management – combined with the knowledge and expertise of your Cat dealer – can provide ways to help you achieve gains that go straight to your bottom line.

  • Improve availability
  • Reduce owning and operating costs
  • Streamline maintenance practices
  • Maximize equipment life
  • Increase resale value

Consisting of five levels of support, from remote access to equipment data to complete, proactive management of your fleet, EMSolutions allows you to choose the amount of support that’s right for you.

Renowned Cat Dealer Support

Knowledgeable Cat dealers have a global reputation for providing outstanding sales and service. Maximize your equipment investment with a Customer Support Agreement tailored to meet your business needs. Take advantage of preventive maintenance programs like Custom Track Service, Scheduled Oil Sampling (S·O·SSM) analysis, and guaranteed maintenance contracts. Cat dealers can even help you with operator training to help boost your profits. When you need repairs, Cat dealers and our unmatched Caterpillar distribution network excel at getting you the right parts you need quickly. Many times the right part is a genuine Cat Reman part. Remanufactured parts offer you the same warranty and reliability as new parts at a fraction of the cost. The breadth of the Reman offering ensures cost effective repairs or rebuilds of your engine and hydraulic components on the D7E. Rebuilt electric drive components such as the APC and Inverter are also currently available with additional options in the works. Caterpillar strives to provide customers the lowest owning and operating costs over the life of their machine.

Safety

Designed with protection in mind

  • New pull-down ladder provides convenient access for fueling and to the back of the machine.
  • New seat belt indicator registers a fault code through Product Link if the operator fails to buckle up, helping to improve your job site safety.
  • Center-post cab with angled doors offers excellent visibility to help operators work more safely.
  • Rear vision camera is available to enhance visibility behind the machine.
  • Standard Operator Presence detection system allows the machine to idle when the operator is not seated, but locks out the power train and front implements to avoid unintentional movement.
  • Convenient steps and handles help you get on and off the tractor with greater ease. Access lighting can be turned on from a ground level switch.

Sustainability

Built for the next generation

  • Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
  • Up to 30 percent more fuel efficient than the D7R2. Efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.
  • In the first four years of production, D7E customers saved more than 13.25 million liters (3.5 million gallons) of diesel fuel compared to the D7R2. Significant fuel savings means reduced emissions and lower costs.
  • The D7E earned a 2009 Clean Air Excellence Award from the U.S. Environmental Protection Agency.
  • Major components are built to be rebuilt, reducing waste and saving you money by giving your dozer a second – and even third – life.

Engine

Engine Model
Cat® C9.3 ACERT™
Flywheel Power
238.0hp
Bore
4.5in
Stroke
5.9in
Displacement
567.0in3
Engine Power (Maximum) - ISO 14396
266.0hp
Engine Power (Maximum) - ISO 14396 (DIN)
270.0hp
Engine Power (Maximum) - SAE J1995
270.0hp
Global Emissions
Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)
Net Power (Maximum) - ISO 9249/SAE J1349
251.0hp
Net Power (Maximum) - ISO 9249/SAE J1349 (DIN)
254.0hp
Net Power (Rated) - ISO 9249/SAE J1349
238.0hp
Net Power (Rated) - ISO 9249/SAE J1349 (DIN)
241.0hp
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
Net Power (Maximum) - ISO 9249
251hp
Net Power (Maximum) - ISO 9249 (DIN)
254hp

Weights

Operating Weight
57441.0lb
Shipping Weight
48402.0lb
Operating Weight - STD SU
57441.0lb
Shipping Weight - LGP
53649.0lb
Operating Weight - LGP S
62886.0lb

Service Refill Capacities

Fuel Tank
108.0gal
Cooling System
22.5gal
Engine Crankcase
8.0gal
Final Drives (each)
7.0gal
Pivot Shaft Compartment
1.8gal
Hydraulic Tank
20.0gal
Final Drive (LGP each)
9.0gal
Power Train
16.0gal
DEF Tank
4.6gal

Hydraulic Controls - Maximum Operating Pressure

Bulldozer
4000.0psi
Tilt Cylinder
4000.0psi
Ripper (Lift)
4000.0psi
Ripper (Pitch)
4000.0psi
Steering
5950.0psi

Drive Train

AC Compressor Maximum Input Current
12.0amps
AC Compressor Nominal Input Voltage
320.0volts
AC Generator and Propulsion Module Voltage
480.0volts
Type
Electric Drive

Hydraulic Controls - Pump

Pump Output - Implement
52.8gal/min
Pump Output - Steering
82.4gal/min
Pump Type
Piston, Variable Displacement
Tilt Cylinder Flow - Head End Flow
24.6gal/min
Tilt Cylinder Flow - Rod End Flow
17.4gal/min
Lift Cylinder Flow
52.8gal/min
Ripper Cylinder Flow
52.8gal/min

Ripper

Beam Cross Section
14.0in
Each Additional Shank
330.0lb
Maximum Penetration Force
19639.0lbf
Pocket Spacing
35.4in
Pryout Force
52695.0lbf
Ramp Angle
26.0Degrees
Shank Gauge
70.9in
Shank Section
72 mm × 228 mm (2.8 in × 9.0 in)
Weight - With One Shank
3572.0lb
Type
Multi-Shank
Number of Pockets
3
Overall Beam Width
82.2in
Maximum Clearance Raised (under tip, pinned in bottom hole)
23.1in
Maximum Penetration
25.6in

Winch

Cable Ferrule Size (O.D. × Length)
60 mm × 65 mm (2.38 in × 2.56 in)
Control
Electronic/Hydraulic
Installed Weight
3350.0lb
Maximum Bare Drum Line Pull
90000.0lbf
Maximum Bare Drum Line Speed
70.0ft/min
Maximum Full Drum Line Pull
57000.0lbf
Maximum Full Drum Line Speed
116.0ft/min
Overall Width
43.0in
Rope Diameter (recommended)
1.0in
Throat Clearance
8.6in
Weight
3350.0lb
Winch Case Length
43.7in
Winch Case Width
32.5in
Winch Drive
Hydraulic
Winch Length
43.9in
Winch Model
PA90
Oil Capacity
3.2gal
Winch and Bracket Length
93.9in
Increased Tractor Length - STD
93.9in
Increased Tractor Length - LGP
93.9in
Drum Diameter
12.5in
Drum Width
8.9in
Flange Diameter
24.0in
Drum Capacity - 24 mm (1 in)
203.0ft
Drum Capacity - 29 mm (1.13 in)
185.0ft
Ferrule Size (O.D. × Length)
60 mm × 65 mm (2.38 in × 2.56 in)

Standards

FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
Cab
ANSI/SAE J1166 OCT98
Brakes
Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008

Hydraulic Controls - Main Relief Valve

Pressure Setting - Steering
4000.0psi

Standard Equipment

  • Power Train
    • Aftercooler, Air to Air
    • Air Cleaner, Precleaner with Strata
    • Tube Dust Ejector
    • C9.3 ACERT Engine: – Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) – Certified Engine with Aftertreatment
    • Coolant, Extended Life
    • Differential Steering
    • Ecology Drains (Engine Oil, Coolant, Hydraulic Oil, Fuel Tank, Power Train Case)
    • Electronic Air Cleaner Service Indicator
    • Fan, Hydraulically Driven Demand
    • Final Drives, Double Reduction
    • Generator, AC
    • Parking Brake
    • Power Inverter
    • Propulsion Module, Transmission, Continuously Variable
    • Prescreener
    • Radiator, Core, Aluminum Bar Plate
    • Separate Circuit Core, Aluminum Bar Plate
    • Starting Aid, Ether
    • Transmission, Continuously Variable
    • Turbocharger, Wastegated
    • Water Separator, Primary Fuel Filter
  • Undercarriage
    • Guards, End Track Guiding
    • Heavy Duty Track (610 mm/24" Moderate Service)
    • Master Link
    • Rollers and Idlers, Lifetime Lubricated
    • Sprocket Rim Segments, Replaceable
    • Track Adjusters, Gas Spring Recoil
    • Undercarriage, Heavy Duty
  • Electrical
    • Accessory Power Converter (APC)
    • Alarm, Backup
    • Batteries, Maintenance Free (1,000 CCA)
    • Converter, 24V to 12V, 10 Amp
    • Heater, Engine Coolant, 120V
    • Horn, Forward Warning
    • Starter, Heavy Duty
  • Operator Environment
    • Armrest, Adjustable
    • Bidirectional Shift Switch
    • CB Ready
    • Cab, Center Post, Integral ROPS/FOPS
    • Continuously Variable Speed Control
    • Controls, Electro-Hydraulic, Pilot
    • Operated with Electronic Deactivation Switch
    • Foot Supports, Dash
    • Hour Meter, Electronic
    • Machine Isolation
    • Mirror, Rearview
    • Modular HVAC, Cab Mounted
    • Monitoring System, Electronic, with Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions
    • Operator Presence
    • Pedal, Travel Control
    • Radio Ready, 12V
    • Seat Belt, Retractable, 76 mm (3 in)
    • Seat, Cloth, Air Suspension
    • Speed Recall Button
    • Throttle Dial, Electronic with Eco Reverse
    • Wipers, Intermittent
  • Other Standard Equipment
    • CD ROM Parts Book
    • Cab, Tilt
    • Engine Enclosures, Perforated
    • Front Tow Hook
    • Ground Level Hour Meter
    • Ground Level Engine Shutdown
    • Guards, Hinged Bottom
    • Guard, Final Drive Flange
    • Hood, Perforated
    • Hydraulics, Load Sensing, Dozer Lift and Tilt
    • Oil Cooler, Hydraulic
    • Oil Cooler, Power Train
    • Product Link
    • Radiator Doors, Louvered, Double Hinged
    • Screen, Grill Door Fan
    • S·O·S Sampling Ports
    • Vandalism Protection for Fluid Compartments and Battery Box

Optional Equipment

  • Power Train
    • Final Drive: – Cold Weather (STD, LGP) – Clamshell (STD, LGP)
    • Engine: – Sound Suppressed, Basic – Thermal Shield – Sound Suppressed and Thermal Shield
    • High Speed Oil Change System
    • Precleaner, with Screen
    • Fuel Group, Heater
    • Fast Fill Fuel System
    • Heavy Duty Battery
    • Cold Weather Fluids
    • Arctic Engine Coolant (–51° C/–60° F)
  • Undercarriage
    • Track: – 610 mm (24 in): - Extreme Service - Extreme Service Rotating Bushing Track - Moderate Service - Moderate Service Rotating Bushing Track - Extreme Service Trapezoidal - Moderate Service Trapezoidal – 660 mm (26 in): - Extreme Service - Moderate Service - Extreme Service Trapezoidal – 915 mm (36 in): - Extreme Service - Extreme Service Trapezoidal - Self Cleaning
    • Undercarriage (STD, LGP): – MS Guide – Full Guide – Guarded – Arctic
  • Electrical
    • Lights: – Basic – Premium – Premium, Rear Screen – Sweeps – Sweeps, Rear Screen
    • Converter, 24V to 12V
    • Receptacle, Jump Start
    • Strobe Light Warning
  • Operator Environment
    • Enhanced Cab Air Cleaner, Roof Mounted
    • Heated Seat
    • Heated and Ventilated Seat
    • Sliding Rear Window
    • Single Camera Visibility Arrangement
  • Guarding
    • Fast Fuel
    • Lights: – Basic – Premium – Screen
    • Fuel Tank
    • Fuel Tank, Waste
    • Bottom, Sealed
    • Screen: – Rear – Rear and Side – Screen or Sweeps Ready
    • Sweeps
    • Door: – Screen – Half Screen
    • Final Drive Flange
  • Blades
    • Single Tilt or Single Tilt Guarded (STD, LGP)
    • Dual Tilt or Dual Tilt Guarded (STD, LGP)
    • S (Straight)
    • S LGP Landfill
    • SU (Semi-Universal)
    • U (Universal)
    • A (Angle)
    • SU Wear Plate
    • SU Rock Guard and Wear Plate
  • Technology
    • Installation, AccuGrade Ready
    • Mounting, AccuGrade Receivers (STD, LGP)
  • Hydraulics
    • Hydraulics, Dual Tilt
    • Auto Reversing Hydraulic Fan
    • Hydraulic Implement Towing Arrangement
    • Hydraulics, Ripper
    • PA90 Winch, Variable Speed
  • Attachments
    • Ladder Group: – Standard – Waste
    • Multi Shank Ripper
    • Drawbar, Rigid
    • Ripper with Striker Bar
    • Counterweight Box, Rear
    • Striker Bar, Box
    • Additional Ripper Tooth