D6T Track-Type Tractor

D6T Track-Type Tractor

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Download Product Documents

Click a link to download the document:

Engine

Engine Model
Cat C9.3 ACERT™
Flywheel Power
215hp
Displacement
567in3
Net Power (Maximum) – 1,200 rpm: ISO 9249/SAE J1349
245hp
Emissions
U.S. EPA Tier 4 Final
Net Power (Rated) – 2,200 rpm: ISO 9249/SAE J1349
215hp
Note
All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Build Number
19

Weights

Operating Weight
47138lb

Service Refill Capacities

Fuel Tank
97.2gal
Cooling System
12.2gal
Engine Crankcase
6.5gal
Power Train
39.1gal
Final Drives (each)
3.6gal
Hydraulic Tank
16.5gal
DEF Tank
4.5gal
Roller Frames (each)
6.6gal
Pivot Shaft Compartment
1.3gal

Operating Weight

XL A
47846lb
XL SU
47138lb
XL VPAT
53042lb
XW A
49797lb
XW SU
48909lb
XW VPAT
54045lb
LGP S
51385lb
LGP A
53829lb
LGP VPAT
54526lb
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades – Capacity

XL SU-Blade
7.26yd3
XL A-Blade
5.17yd3
XL VPAT-Blade
6.07yd3
XW SU-Blade
7.38yd3
XW A-Blade
5.69yd3
XW VPAT-Blade
6.57yd3
LGP S-Blade
4.96yd3
LGP A-Blade
6.46yd3
LGP VPAT-Blade
6.57yd3

Dimensions – XL

Width of Tractor Without Trunnions (standard track)
8.00ft
Machine Height to Product Link Antenna(1)
10.67ft
Length of Track on Ground
9.25ft
Length of Basic Tractor(2)
13.83ft
Ground Clearance
15in
Ground Pressure (ISO 16754)(3)
8.66psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – XW

Width of Tractor Without Trunnions (standard track)
9.17ft
Machine Height to Product Link Antenna(1)
10.67ft
Length of Track on Ground
9.25ft
Length of Basic Tractor(2)
13.83ft
Ground Clearance
15in
Ground Pressure (ISO 16754)(3)
6.64psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – LGP

Width of Tractor Without Trunnions (standard track)
10.50ft
Machine Height to Product Link Antenna(1)
10.83ft
Length of Track on Ground
10.67ft
Length of Basic Tractor(2)
14.50ft
Ground Clearance
16in
Ground Pressure (ISO 16754)(3)
5.11psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – XL VPAT

Width of Tractor Without Trunnions (standard track)
8.92ft
Machine Height to Product Link Antenna(1)
10.67ft
Length of Track on Ground
9.25ft
Length of Basic Tractor(2)
16.08ft
Ground Clearance
15in
Ground Pressure (ISO 16754)(3)
9.78psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Blades – Width

XL SU-Blade
10.7ft
XL A-Blade
13.7ft
XL VPAT-Blade
12.7ft
XW SU-Blade
11.7ft
XW A-Blade
14.8ft
XW VPAT-Blade
13.7ft
LGP S-Blade
13.3ft
LGP A-Blade
16.6ft
LGP VPAT-Blade
13.7ft

Dimensions – XW VPAT

Width of Tractor Without Trunnions (standard track)
9.83ft
Machine Height to Product Link Antenna(1)
10.83ft
Length of Track on Ground
10.67ft
Length of Basic Tractor(2)
16.42ft
Ground Clearance
16in
Ground Pressure (ISO 16754)(3)
6.92psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – LGP VPAT

Width of Tractor Without Trunnions (standard track)
10.33ft
Machine Height to Product Link Antenna(1)
10.83ft
Length of Track on Ground
10.67ft
Length of Basic Tractor(2)
16.42ft
Ground Clearance
16in
Ground Pressure (ISO 16754)(3)
6.28psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.